基于非线性重构的跨声速压气机叶片静气动弹性分析

推进技术 ›› 2017, Vol. 38 ›› Issue (8): 1787-1793.

基于非线性重构的跨声速压气机叶片静气动弹性分析

康达,王永亮,钟兢军,刘子豪

大连海事大学轮机工程学院，辽宁大连 116026,大连海事大学轮机工程学院，辽宁大连 116026,大连海事大学轮机工程学院，辽宁大连 116026,大连海事大学轮机工程学院，辽宁大连 116026

发布日期:2021-08-15
作者简介:康达，男，博士生，研究领域为叶轮机械气动热力学。
基金资助:
国家自然科学基金重点项目(51606023；51436002)；辽宁省自然科学基金(2015020130)；辽宁省高等学校创新团队支持计划资助项目(LT2015004)；中央高校基本科研业务费专项资金(3132017015)。

Static Aeroelastic Analysis of Transonic Compressor Blade Based on Nonlinear Reconstruction Method

Marine Engineering College，Dalian Maritime University，Dalian 116026，China,Marine Engineering College，Dalian Maritime University，Dalian 116026，China,Marine Engineering College，Dalian Maritime University，Dalian 116026，China and Marine Engineering College，Dalian Maritime University，Dalian 116026，China

Published:2021-08-15

摘要/Abstract

摘要： 工作状态的压气机转子叶片在气动力及离心力作用下会发生变形，准确的叶片构型预测对于压气机性能分析和检验具有重要意义。为研究叶片气弹变形对压气机气动及结构参数的影响，采用非线性叶型重构方法获得了Stage 37转子叶片在不同工况下的热态构型。在计算叶片变形时，计入了叶片受力载荷随构型变化的非线性特征以及叶片的变刚度特性，叶片受力载荷与刚度矩阵随叶片构型同步更新。考察了不同工况下热态叶片的变形规律，研究表明:叶型重构方法可有效提高压气机气动性能的预估精度。设计转速下，热态叶片的堵塞流量及近失速点压比较冷态叶片分别增加1.2%和0.24%，叶片变形对气动特性的影响随转速增加而增强。离心力对叶片变形起主要作用，然而气动力的压力反扭作用不可忽略，设计转速下近失速点反扭角较堵塞点增加了14.7%。计算跨声速转子热态叶片构型时，需考虑离心力和气动力的综合作用。

关键词: 压气机；叶型重构；流固耦合；气动弹性；非线性

Abstract: The aerodynamic and centrifugal loads acting on compressor rotor blade in operation deform the blade configuration relative to its stationary shape. Accurate prediction of the running blade configuration has a significant role in examining and analyzing compressor performance. In order to study the effects of blade aeroelastic deformations on aerodynamic and structure parameters of the compressor，a nonlinear reconstruction method is employed to determine the hot blade shapes of Stage 37 rotor blade under different operating conditions. When calculating blade deformations，the nonlinear effects of stiffness and loads arising from the blade deflections are taken into account. The blade stiffness and load conditions are updated synchronously with the variation of blade shape. The deformation law of hot blade are analyzed under different working conditions. The results show that the accuracy of aerodynamic performance predictions can be improved by using blade reconstruction method. At design speed，the choke mass flow rate of the hot blade increases by 1.2% compared to the cold blade. The influence of blade deformations on compressor performance increases with rotating speed. At near stall point，the total pressure ratio of the hot blade increases by 0.24% compared to the cold blade. The centrifugal load has a major impact on blade deformation. However，blade untwist caused by aerodynamic load can not be ignored. At design speed，the untwist angle near stall point increases by 14.7% compared to that at choke condition. Both aerodynamic and centrifugal loads should be taken into account when calculating transonic rotor running blade configuration.

Key words: Compressor；Blade reconstruction；Fluid-structure interaction；Aeroelasticity；Nonlinearity

康达,王永亮,钟兢军,刘子豪. 基于非线性重构的跨声速压气机叶片静气动弹性分析[J]. 推进技术, 2017, 38(8): 1787-1793.

KANG Da,WANG Yong-liang,ZHONG Jing-jun,LIU Zi-hao. Static Aeroelastic Analysis of Transonic Compressor Blade Based on Nonlinear Reconstruction Method[J]. Journal of Propulsion Technology, 2017, 38(8): 1787-1793.

参考文献

[1] Gaolian Liu. A New Generation of Inverse Shape Design Problem in Aerodynamics and Aerothermoelasticity: Concepts, Theory and Methods[J]. Aircraft Engineering and Aerospace Technology, 2000, 72(4): 334-344.
[2] 郑赟, 田晓, 杨慧. 跨声速风扇叶片变形对气动性能的影响[J]. 航空动力学报, 2011, 26(7): 1621-1627.
[3] Hamid Hazby, Ian Woods, Michael Casey, et al. Effects of Blade Deformation on the Performance of a High Flow Coefficient Mixed Flow Impeller[J]. ASME Journal of Turbomachinery, 2015, 137(12): 1-9.
[4] 陈懋章. 风扇/压气机技术发展和对今后工作的建议[J]. 航空动力学报, 2002, 17(1): 1-15.
[5] Roberto Biollo, Ernesto Benini. Recent Advances in Transonic Axial Compressor Aerodynamics[J]. Progress in Aerospace Sciences, 2013, 56(1): 1-18.
[6] M Ohtsuka. Untwist of Rotating Blades[J]. ASME Journal of Engineering for Power, 1975, 97(2): 180-187.
[7] O Yamamoto, R August. Structural and Aerodynamic Analysis of a Large-Scale Advanced Propeller Blade[J].Journal of Propulsion and Power, 1992, 8(2): 367-373.
[8] Aparajit J Mahajan, George L Stefko. An Iterative Multidisciplinary Analysis for Rotor Blade Shape Determination[R]. AIAA 93-2085.
[9] B S Kalles?e, M H Hansen. Some Effects of Large Blade Deflections on Aeroelastic Stability[R]. AIAA 2009-839.
[10] 杨慧, 沈真, 郑赟. 叶片反扭对跨声速大涵道比风扇性能的影响[J]. 航空动力学报, 2016, 31(1): 100-105.
[11] Songbai Wang, Shaobin Li, Xizhen Song. Investigations on Static Aeroelastic Problems of Transonic Fans Based on Fluid-Structure Interaction Method[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2016, 230(7): 685-695.
[12] 汪松柏, 李绍斌, 宋西镇. 基于流固耦合的跨声速压气机叶片静气动弹性分析[J]. 力学与实践, 2016, 38(1): 38-42.
[13] 毛军, 杨立国, 郗艳红. 大型轴流风机叶片的气动弹性数值分析研究[J]. 机械工程学报, 2009, 45(11): 133-139.
[14] 汪松柏, 李绍斌, 宋西镇. 基于流固耦合方法的跨声速叶片气动和强度性能研究[J]. 振动与冲击, 2016, 35(20): 104-110.
[15] Vicente P Timon, Roque Corral. A Study on the Effects of Geometric Non Linearities on the Un-Running Transformation of Compressor Blades[R]. ASME-GT2014-25638.
[16] Lonnie Reid, Royce D Moore. Design and Overall Performance of Four Highly Loaded, High-Speed Inlet Stages for an Advanced High-Pressure-Ratio Core Compressor[R]. NASA-TP-1337, 1978.
[17] J Dunham. CFD Validation for Propulsion System Components[R]. AGARD-AR-355, 1998.
[18] 何成, 王如根, 胡加国, 等. 不同转速下叶尖间隙流对跨声速压气机失速的影响[J]. 推进技术, 2016, 37(9): 1657-1663. (HE Cheng, WANG Ru-gen, HU Jia-guo, et al. Effects of Tip Leakage Flow on Transonic Compressor Instability at Different Rotating Speed[J].Journal of Propulsion Technology, 2016, 37(9): 1657-1663.)
[19] 吴艳辉, 李清鹏, 田江涛, 等. 轴流压气机转子叶尖二次涡的实验验证及形成机理[J]. 推进技术, 2012, 33(3): 363-370. (WU Yan-hui, LI Qing-peng, TIAN Jiang-tao, et al. Experimental Validation and Formation Mechanism Analysis of Tip Secondary Vortex in a Compressor Rotor[J]. Journal of Propulsion Technology, 2012, 33(3): 363-370.)(编辑:张荣莉)　　　　　　　　　　　　　　收稿日期:2016-12-09；修订日期:2017-02-16。基金项目:国家自然科学基金重点项目(51606023；51436002)；辽宁省自然科学基金(2015020130)；辽宁省高等学校创新团队支持计划资助项目(LT2015004)；中央高校基本科研业务费专项资金(3132017015)。作者简介:康达,男,博士生,研究领域为叶轮机械气动热力学。E-mail: kangda1213@163.com