折返式鼠笼弹性支承刚度特性研究

推进技术 ›› 2017, Vol. 38 ›› Issue (9): 2078-2085.

折返式鼠笼弹性支承刚度特性研究

王洋洲,刘倩,丁振晓,尹健昭,苏卫民

北京航天动力研究所，北京 100076,北京航天动力研究所，北京 100076,北京航天动力研究所，北京 100076,北京航天动力研究所，北京 100076,北京航天动力研究所，北京 100076

发布日期:2021-08-15
作者简介:王洋洲，男，硕士，工程师，研究领域为火箭发动机涡轮泵试验技术。

Study on Stiffness Characteristics for Folded Squirrel Cage Elastic Support

Beijing Aerospace Propulsion Institute，Beijing 100076，China,Beijing Aerospace Propulsion Institute，Beijing 100076，China,Beijing Aerospace Propulsion Institute，Beijing 100076，China,Beijing Aerospace Propulsion Institute，Beijing 100076，China and Beijing Aerospace Propulsion Institute，Beijing 100076，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究折返式鼠笼弹性支承的刚度特性，采用数值仿真与试验研究相结合的方法，对鼠笼弹支径向刚度和角刚度的特性及其关键影响参数进行了分析。结果表明，鼠笼弹支与加力环之间的间隙对弹支刚度影响明显，与过盈配合相比，当间隙增加到1mm时刚度降低了37.3%；加力环厚度越小，弹支刚度越小；位移测点位置对刚度结果影响较大，折返处刚度稳定性好，不同力施加位置下，其变化幅度仅为2%，而折返套尾部刚度的变化幅度达到了27.3%；角刚度受力施加位置影响巨大，变化幅度达到了85.2%。

关键词: 折返式鼠笼弹支；刚度特性；角刚度；试验；数值模拟

Abstract: In order to study stiffness characteristics of folded squirrel cage elastic support (SCES)，the radial and angular stiffness and its key influence factors were analyzed by adopting numerical simulation and experimental methods. The results showed that the clearance between SCES and loading ring had significant effect on SCES stiffness，compared with interference fit，when the clearance increased to 1 mm，the stiffness was reduced by 37.3%. The smaller loading ring thickness was，the smaller elastic support stiffness was. Displacement gauging point had great impact on stiffness，good stability was showed at the retrace point，where the variation range was 2% in different loading positions，while variation range of stiffness in the tail of folded sleeve reached to 27.3%. The loading position had also great effect on angular stiffness，and the variation range reached to 85.2%.

Key words: Folded squirrel cage elastic support；Stiffness characteristics；Angular stiffness；Test；Numerical simulation

王洋洲,刘倩,丁振晓,尹健昭,苏卫民. 折返式鼠笼弹性支承刚度特性研究[J]. 推进技术, 2017, 38(9): 2078-2085.

WANG Yang-zhou,LIU Qian,DING Zhen-xiao,YIN Jian-zhao,SU Wei-min. Study on Stiffness Characteristics for Folded Squirrel Cage Elastic Support[J]. Journal of Propulsion Technology, 2017, 38(9): 2078-2085.

参考文献

[1] 王丹, 张卫红, 王振培, 等. 三维曲面上槽孔形状优化方法及其在鼠笼式弹性支座设计中的应用[J]. 中国科学:物理学力学天文学, 2010, 40(8): 1001-1007.
[2] George B, Prasad N S. Finite Element Analysis of Squirrel Cage Ball Bearings for Gas Turbine Engines[J]. Defence Science Journal, 2007, 57(2): 165-171.
[3] 冯国全, 周柏卓, 王娟. 基于整体-局部技术的鼠笼式弹性支承疲劳强度分析[J]. 航空发动机, 2007, 33(4): 22-24.
[4] 冯国全, 周柏卓. 鼠笼式弹性支承结构参数优化设计与试验[J]. 航空动力学报, 2011, 26(1): 199-203.
[5] 栗勇, 杨正兵, 李光辉, 等. 串联式鼠笼弹性支承高周疲劳性能试验[J]. 燃气涡轮试验与研究, 2014, 27(2): 21-27.
[6] 孙杨. 某涡喷发动机前轴承弹性支承试验模态分析[J]. 推进技术, 1999, 20(3): 61-64. (SUN Yang. Experiment Modal Analysis on Front Bearing Spring Support for Turbojet Engine[J]. Journal of Propulsion Technology, 1999, 20(3): 61-64.)
[7] 李文忠, 王黎钦. 高速转子系统振动控制技术评述[J]. 机械强度, 2005, 27(1): 44-49.
[8] 马艳红, 朱海雄, 徐丹, 等. 带金属橡胶弹性支承结构力学性能仿真[C]. 南昌:第七届中国航空学会航空发动机可靠性学术会议, 2013.
[9] 苏卫民. 发动机涡轮泵转子新型阻尼挠性支承的性能[J]. 推进技术, 2000, 21(5): 53-57. (SU Wei-min. Characteristic of a New Damped Flexible Support in Turbopump Rotor for Engine[J]. Journal of Propulsion Technology, 2000, 21(5): 53-57.)
[10] 马艳红, 陆宏伟, 朱海雄, 等. 弹性环金属橡胶支撑结构刚度设计与试验验证[J]. 航空学报, 2013, 34(6): 1301-1308.
[11] 李贵林, 李晓明, 赵行明, 等. 组合弹性支承结构的设计与试验研究[J]. 燃气涡轮试验与研究, 2006, 15(3): 53-57.
[12] 钟芳明, 龚建政, 贺星. 燃气轮机转子支承刚度计算研究[J]. 船海工程, 2012, 41(1): 41-44.
[13] 张大义, 母国新, 洪杰. 航空发动机转子支承系统刚度计算中的几个问题[J]. 战术导弹技术, 2005, 2: 20-23.
[14] 程小勇, 陈果, 李成刚, 等. 航空发动机转子系统模拟支承设计与刚度计算[J]. 航空计算技术, 2012, 42(6): 9-12.
[15] 徐方程. 燃气轮机转子-鼠笼-挤压油膜阻尼器动力学特性研究[D]. 哈尔滨:哈尔滨工业大学, 2009.
[16] Burguete R L, Patterson E A. Comparison of Numerical and Experimental Analysis for Contact Problems under Normal and Tangential Load[J]. Journal of Aerospace Engineering, 2001, 215: 113-23.　　　　　　　　　　　　　*　收稿日期:2016-04-19；修订日期:2016-07-08。作者简介:王洋洲,男,硕士,工程师,研究领域为火箭发动机涡轮泵试验技术。E-mail: 568456966@qq.com(编辑:朱立影)