空心锥形喷雾与横流掺混特性研究

推进技术 ›› 2018, Vol. 39 ›› Issue (1): 100-106.

空心锥形喷雾与横流掺混特性研究

盛刚浩¹,张海滨¹,白博峰²

西安交通大学化学工程与技术学院，陕西西安 710049,西安交通大学化学工程与技术学院，陕西西安 710049,西安交通大学动力工程多相流国家重点实验室，陕西西安 710049

发布日期:2021-08-15
作者简介:盛刚浩，男，硕士生，研究领域为气液两相强化掺混。E-mail: ganghao@stu.xjtu.edu.cn 通讯作者:张海滨，男，博士，副教授，研究领域为气液两相掺混与传热。
基金资助:
国家自然科学基金(51306146)。

Study on Characteristics of Mixing of Hollow-Cone Spray and Crossflow

School of Chemical Engineering and Technology，Xi’an Jiaotong University，Xi’an 710049，China,School of Chemical Engineering and Technology，Xi’an Jiaotong University，Xi’an 710049，China and State Key Laboratory of Multiphase Flow in Power Engineering，Xi’an Jiaotong University，Xi’an 710049，China

Published:2021-08-15

摘要/Abstract

摘要： 在空心锥形喷雾与横向气流掺混过程中，大尺度对称旋涡对CVP(Counter-Rotating Vortex Pair)是影响液滴扩散的主要机制，为了研究CVP结构的演变特性，本文开展了空心锥形喷雾与横向气流掺混过程的实验研究，采用PIV可视化技术对不同喷雾状态与横流速度下掺混流场中液滴的扩散与分布特性进行了测量。结果表明:CVP的卷吸夹带作用使雾化液滴主要分布在掺混流场中上部；初始雾化液滴动量较大时，CVP结构尺寸与涡心强度越大，有利于液滴的扩散；横流速度提高时，CVP结构位置上移，尺寸减小，掺混效果变差。采用涡心强度、涡心距与涡心高度三个参数来描述CVP结构强度特征，基于实验测量结果给出了CVP结构上述特征参数的关联式。在横流速度、喷嘴压力和初始雾化粒径3个变量中，初始雾化粒径对CVP结构影响最大，而喷嘴压力和横流速度的影响较小。

关键词: 空心锥形喷雾；横流；液滴扩散；CVP结构

Abstract: The CVP(Counter-Rotating Vortex Pair) structure which is caused by the interaction between the hollow-cone spray and the crossflow exerts great influence on spray droplet dispersion. In order to study the characteristics of the CVP evolution， experimental investigations on the mixing flow field of the hollow-cone spray in a crossflow were conducted. The dispersion and distribution of spray droplets in the mixing flow field with different spray and crossflow conditions were measured by PIV system. The results show that the entrainment effect of the CVP contributes atomization droplets to distributing in the upper of the mixing field. The larger initial momentum of droplets， the larger the CVP structure size and the vortex intensity and it is beneficial to the dispersion of the droplets. When the crossflow velocity increases， the CVP moves up and the CVP structure size decreases， consequently the mixing effect becomes worse. The intensity characteristic of the CVP is described by three parameters: vortex core strength， vortex center distance and vortex core height， the correlations of the characteristic parameters of the CVP are given based on the experimental results. In the three variables of the crossflow velocity， atomization pressure and initial droplet diameter， the initial droplet diameter has greater influence on the CVP structure， while the atomization pressure and the crossflow velocity have less effect.

Key words: Hollow-cone spray；Crossflow；Droplet dispersion；CVP

盛刚浩,张海滨,白博峰. 空心锥形喷雾与横流掺混特性研究[J]. 推进技术, 2018, 39(1): 100-106.

SHENG Gang-hao¹,ZHANG Hai-bin¹,BAI Bo-feng². Study on Characteristics of Mixing of Hollow-Cone Spray and Crossflow[J]. Journal of Propulsion Technology, 2018, 39(1): 100-106.

参考文献

[1] Marchione T, Allouis C, Amoresano A. Experimental Investigation of a Pressure Swirl Atomizer Spray[J]. Journal of Propulsion and Power, 2007, 23(5): 1096-1101.
[2] Chang K C, Wang M R, Wu W J, et al. Experimental and Theoretical Study on Hollow-Cone Spray[J]. Journal of Propulsion and Power, 1993, 9(9): 28-34.
[3] Marchione T, Allouis C, Amoresano A, et al. Experimental Investigation of a Pressure Swirl Atomizer Spray[J]. Journal of Propulsion and Power, 2015, 23(5):1096-1101.
[4] 田维平, 蔡体敏, 陆贺建, 等. 水冲压发动机热力计算[J]. 固体火箭技术, 2006, 29(2): 95-98.
[5] 杨亚晶, 何茂刚, 徐厚达. 水冲压发动机的热力循环性能预示[J]. 推进技术, 2009, 30(4): 474-478. (YANG Ya-jing, HE Mao-gang, XU Hou-da. Thermodynamic Cycle Performance for Water Ramjet Motors[J].Journal of Propulsion Technology, 2009, 30(4): 474-478.)
[6] Adelberg M. Breakup Rate and Penetration of a Liquid Jet in a Gas Stream[J]. AIAA Journal, 2015, 5(8):1408-1415.
[7] Lam K M, N K O. Investigation of Flow Structures of a Basic Annular Jet[J]. AIAA Journal, 2015, 24(9):1488-1493.
[8] Costa M, Melo M J, Sousa J M M, et al. Spray Characteristics of Angled Liquid Injection into Subsonic Crossflows[J]. AIAA Journal, 2006, 44(3): 646-653.
[9] Philips J C, Miller P C H, Thomas N H. Air Flow and Droplet Motions Produced by the Interaction of Flat-Fan Spray and Cross Flows[J]. Atomization and Spray, 2000, 10(1): 83-104.
[10] 邢小军, 徐行, 郭志辉, 等. 模型燃烧室冷态喷雾场的实验研究[J]. 推进技术, 2000, 21(5): 61-65. (XING Xiao-jun, XU Hang, GUO Zhi-hui, et al. Experimental Study on Spray Field in Combustor by Phase Dopplor Analyzer[J]. Journal of Propulsion Technology,2000, 21(5): 61-65.)
[11] 刘阳阳, 何国强, 魏祥庚, 等. 内直外旋气液同轴式喷嘴流量及雾化特性[J]. 推进技术, 2016, 37(7):1280-1286. (LIU Yang-yang, HE Guo-qiang, WEI Xiang-geng, et al. Flow Rate and Spray Characteristics of Gas Centered Swirl Gas-Liquid Coaxial Injector[J]. Journal of Propulsion Technology, 2016, 37(7): 1280-1286.)
[12] 刘焜, 余永刚, 赵娜, 等. 小尺度空间内对撞射流雾化场特性实验研究[J]. 推进技术, 2015, 36(4): 595-600. (LIU Kun, YU Yong-gang, ZHAO Na, et al. Experimental Study on Spray Charateristic of Impinging Nozzle in Small Scale Chamber[J]. Journal of Propulsion Technology, 2015, 36(4): 595-600.)
[13] Ghosh S, Hunt J. Spray Jet in a Cross-Flow[J]. Journal of Fluid Mechanics, 1998, 365(1): 109-136.
[14] Wang Y Z, Li Y X, Weng S L. Experimental Investigation on Inner Two-Phase Flow in Counter-Flow Sprays Aturator for HAT Cycle[J]. Applied Thermal Engineering, 2006, 26(17): 2417-2424.
[15] Ming Y, Hang X U, Yang M L, et al. Study on Breakup of Conical Liquid Sheet under Varying Flow Conditions[J]. Chinese Journal of Aeronautics, 2003, 16(1): 12-14.
[16] Surya R P, Gadgil H, Raghunandan B N. Breakup Processes of Pressure Swirl Spray in Gaseous Cross-Flow International[J]. Journal of Multiphase Flow, 2014, 66(7): 79-91.
[17] Eletribi S. Dispersion of Water Spray in a Transverse Air Jet and the Aging of Spray Nozzles[D]. New York: State University of New York at Stony Brook, 1997.
[18] Lynch A, Batchelor R G. Spray Characteristics of a Pressure-Swirl Fuel Injector Subjected to a Crossflow[J]. Atomization and Sprays, 2011, 21(8): 625-643.
[19] Bai B F, ZHANG H B, LIU L, et al. Experimental Study on Turbulent Mixing of Spray Droplets in Crossflow[J]. Experimental Thermal and Fluid Science, 2009, 33(6): 1012-1020.
[20] 孙慧娟, 刘利, 张海滨, 等. 横流中喷雾掺混流场结构研究[J]. 推进技术, 2012, 33(2): 221-226. (SUN Hui-juan, LIU Li, ZHANG Hai-bin, et al. Investigation of Mixing Flow Field of Spray Droplets in Crossflow[J]. Journal of Propulsion Technology, 2012, 33(2):221-226.)
[21] 刘利, 张海滨, 孙慧娟, 等. 矩形通道内横流喷雾掺混流场的实验研究[J]. 工程热物理学报, 2011, 32(2): 233-238.
[22] 张海滨, 白博峰, 刘利, 等. 受限空间内空心锥形喷雾—横流掺混规律[J]. 化工学报, 2012, 63(5): 1354-1359.
[23] ZHANG H, BAI B, LIU L, et al. Mixing of Hollow-Cone Spray with a Confined Crossflow in Rectangular Duct[J]. AIAA Journal, 2015, 51(3): 615-622.
[24] 李继保, 岳明, 杨茂林. 锥形液膜Kevin-Helmholtz波不稳定性的实验研究[J]. 航空动力学报, 2007, 22(3): 337-341.
[25] Durdina L, Jedelsky J, Jicha M. Investigation and Comparison of Spray Characteristics of Pressure-Swirl Atomizers for a Small Sized Aircraft Turbine Engine[J]. International Journal of Heat and Mass Transfer, 2014, 78(7): 892-900.(编辑:梅瑛)　　　　　　　　　　　　　*　收稿日期:2016-09-23；修订日期:2016-11-18。基金项目:国家自然科学基金(51306146)。作者简介:盛刚浩,男,硕士生,研究领域为气液两相强化掺混。E-mail: ganghao@stu.xjtu.edu.cn通讯作者:张海滨,男,博士,副教授,研究领域为气液两相掺混与传热。E-mail: hb-zhang@mail.xjtu.edu.cn