基于共轭换热的涡轮转子热环境预测方法研究

推进技术 ›› 2018, Vol. 39 ›› Issue (1): 142-151.

基于共轭换热的涡轮转子热环境预测方法研究

张添翼^1,2,李宛蓉¹,于洋¹,雷鸣¹,梁新刚²

北京动力机械研究所，北京 100074; 清华大学航天航空学院，北京 100084,北京动力机械研究所，北京 100074,北京动力机械研究所，北京 100074,北京动力机械研究所，北京 100074,清华大学航天航空学院，北京 100084

发布日期:2021-08-15
作者简介:张添翼，男，博士生，工程师，研究领域为发动机综合热管理。

Coupled Heat Transfer Predictions of Thermal Environment for a Turbine Rotor

Beijing Power Machinery Institute，Beijing 100074，China; School of Aerospace，Tsinghua University，Beijing 10084，China Coupled Heat Transfer Predictions of Thermal Environment for a Turbine Rotor,Beijing Power Machinery Institute，Beijing 100074，China,Beijing Power Machinery Institute，Beijing 100074，China,Beijing Power Machinery Institute，Beijing 100074，China and School of Aerospace，Tsinghua University，Beijing 10084，China Coupled Heat Transfer Predictions of Thermal Environment for a Turbine Rotor

Published:2021-08-15

摘要/Abstract

摘要： 为了开发适用于发动机方案设计阶段的涡轮转子热环境预测方法，开发获得了一种快速而准确的稳态热环境预测算法。算法求解二维和三维导热方程来计算固体导热，用二维边界层算法计算叶身燃气边界条件，用一维流体网络法计算空气系统流量。使用该算法对某型涡扇发动机高压涡轮转子进行了温度场计算，并与试验结果进行了对比，温度误差约为30～40K。对燃气边界和冷气边界分别对比了共轭换热计算和非共轭换热计算模式下结果的差异，温度差值在120K左右，流量相对差值在10%左右。结论表明:对于空气系统边界，共轭模型显著影响计算精度；而对于主流边界，就本文研究的非冷却叶片而言，是否采用共轭模型对温度场预测影响很小。

关键词: 涡轮转子；空气系统；共轭换热；热环境预测

Abstract: In order to predict the heat transfer for gas turbines in conceptual design phase， an algorithm was motivated to provide quick， reliable predictions of steady state temperature field. The analyses used 3-D and 2-D solvers for the heat conduction， 2-D boundary layer solver for the main gas boundary and 1-D solver for the fluid network of the secondary air system （SAS）. A full scale turbine rotor was studied with this method. The calculation is consistent with experimental result. The average temperature error is 30～40K. Difference between the coupled and uncoupled model is studied for both of the SAS boundary and the main gas boundary. The maximum temperature difference is 120K， maximum mass flow rate relative difference is 10%. It’s concluded that energy coupling of the SAS boundary remarkably affects the model precision. For non-cooling turbine blades， energy coupling of the main gas boundary have little impact on the temperature prediction.

Key words: Turbine rotor；Air system；Conjugate heat transfer；Thermal environment prediction

张添翼,李宛蓉,于洋,雷鸣,梁新刚. 基于共轭换热的涡轮转子热环境预测方法研究[J]. 推进技术, 2018, 39(1): 142-151.

ZHANG Tian-yi^1,2,LI Wan-rong¹,YU Yang¹,LEI Ming¹,LIANG Xin-gang². Coupled Heat Transfer Predictions of Thermal Environment for a Turbine Rotor[J]. Journal of Propulsion Technology, 2018, 39(1): 142-151.

参考文献

[1] Ralf S, Sigmar W. Gas Turbine Heat Transfer: Past and Future Challenges[J]. Journal of Propulsion and Power, 2000, 16(4): 583-589.
[2] Maffulli R, He L. Wall Temperature Effects on Heat Transfer Coefficient for High-Pressure Turbines [J]. Journal of Propulsion and Power, 2014, 30(4): 1080-1090.
[3] Douglas L S, Daniel J D. Simulation of Coupled Unsteady Flow and Heat Conduction in Turbine Stage[J]. Journal of Propulsion and Power, 2000, 16(6): 1141-1148.
[4] Roger L D, John P C. Conjugate Design/Analysis Procedure for Film-Cooled Turbine Airfoil Sections[J]. Journal of Propulsion and Power, 2011, 27(1): 61-70.
[5] 罗磊, 卢少鹏, 迟重然, 等. 气热耦合条件下涡轮动叶叶型与冷却结构优化[J]. 推进技术, 2014, 35(5): 603-609. (LUO Lei, LU Shao-peng, CHI Zhong-ran, et al. Conjugate Heat Transfer Optimization for Blade Profiles and Cooling Structure in Turbine Rotor [J]. Journal of Propulsion Technology, 2014, 35(5):603-609.)
[6] Majumdar A, Ravindran S S. Numerical Prediction of Conjugate Heat Transfer in Fluid Network[J]. Journal of Propulsion and Power, 2011, 27(3): 621-630.
[7] James R R. Flownet: A Computer Program for Calculating Secondary Flow Conditions in a Network of Turbomachinery[R]. NASA TM-73774.
[8] Ko S H, Rhode D L. Disk Temperature Details of Rim Seal Turbulent Heat Diffusion and Disk Frictional Heating [J]. Journal of Propulsion and Power, 1999, 15(2):280-287.
[9] 张丽, 刘松龄, 朱惠人. 涡轮叶片尾缘扰流柱通道流动换热计算[J]. 推进技术, 2010, 31(5): 593-598. (ZHANG Li, LIU Song-ling, ZHU Hui-ren. Computation for the Flow and Heat Transfer Properties of a Pin Fin Duct[J]. Journal of Propulsion Technology, 2010, 31(5): 593-598.)
[10] Yannick M. Integrated Fluid Network-Thermomechanical Approach For the Coupled Analysis of a Jet Engine [R]. ASME GT 2009-59104.
[11] 郭晓杰, 顾伟, 竺晓程, 等. 航空发动机热端部件二次流动和传热耦合方法研究[J]. 燃气轮机技术, 2014, 27(2): 40-45.
[12] Crawford M E, Kays W M. STAN5 - A Program for Numerical Computation of Two-Dimensional Internal and External Boundary Layer Flows[R]. NASA Contractor Report, 2742.
[13] 杨世铭, 陶文铨. 传热学[M]. 北京:高等教育出版社, 2006.
[14] 吴丁毅. 内流系统的网络计算法[J]. 航空学报, 1996, 17(6): 653-657.
[15] Majumdar A, Katherine P V. A General Fluid System Simulation Program to Model Secondary Flows in Turbomachinery [R]. AIAA 95-2969.
[16] Dario A, Nicholas J H, Christopher J B. Thermo-Mechanical Finite Element Analysis/Computational Fluid Dynamics Coupling of an Interstage Seal Cavity Using Torsional Spring Analogy[J]. Journal of Turbomachinery, 2012, 134.
[17] Sun Z X, John W C, Nicholas J H, et al. Coupled Aerothermomechanical Simulation for a Turbine Disk Through a Full Transient Cycle[J]. Journal of Turbomachinery, 2012, 134.
[18] Behnam N, Arnold K, Knut L. Interdisciplinary Analysis of a Turbine Blade with Internal Cooling Including Local Distribution and Rotation Effects[R]. AIAA 2014-2388.(编辑:刘萝威)　　　　　　　　　　　　　*　收稿日期:2017-01-11；修订日期:2017-04-15。作者简介:张添翼, 男,博士生,工程师,研究领域为发动机综合热管理。E-mail: zhang_noel@sohu.com