变冲角下压力面小翼控制高亚声速扩压叶栅气动特性的研究

推进技术 ›› 2018, Vol. 39 ›› Issue (1): 76-85.

变冲角下压力面小翼控制高亚声速扩压叶栅气动特性的研究

吴宛洋,钟兢军,韩少冰

大连海事大学轮机工程学院，辽宁大连 116026,大连海事大学轮机工程学院，辽宁大连 116026,大连海事大学轮机工程学院，辽宁大连 116026

发布日期:2021-08-15
作者简介:吴宛洋，女，博士生，研究领域为叶轮机械气动热力学。
基金资助:
国家自然科学基金(51436002；51406021)；中央高校基本科研业务费专项资金资助(3132016014；3132017001)；辽宁省高等学校创新团队支持计划(LT2015004)；辽宁省博士科研启动基金(201601078)。

Effects of Pressure Side Winglet on Aerodynamic Performance of High Subsonic Compressor Cascade with Different Incidences

Marine Engineering College，Dalian Maritime University，Dalian 116026，China,Marine Engineering College，Dalian Maritime University，Dalian 116026，China and Marine Engineering College，Dalian Maritime University，Dalian 116026，China

Published:2021-08-15

摘要/Abstract

摘要： 为了探究变冲角时压力面小翼对高亚声速扩压叶栅气动特性的影响，采用数值模拟软件ANSYS CFX对不同来流冲角下(0°，±3°，±6°)原型叶栅及加装了不同宽度压力面小翼的改型叶栅进行了数值计算。结果表明:不同冲角下压力面小翼都可以削弱泄漏涡的强度，改善叶顶间隙流动，降低叶栅流动损失。不同冲角时具有不同的最佳小翼方案，PW1.5方案在+6°冲角下性能提高最大，与同冲角下的原型叶栅相比，PW1.5方案的总压损失降低了14.4％。

关键词: 压气机叶栅；压力面小翼；冲角；数值模拟

Abstract: In order to investigate the effects of the pressure side winglet on aerodynamic performance of high subsonic compressor cascade under different angles of incidence， the numerical simulation has been carried out to explore the original cascade and cascades with different pressure side winglets at different incidences(0°， ±3°， ±6°) by using the ANSYS CFX software. The results show that the pressure side winglet can reduce the intensity of tip leakage vortex and improve the tip clearance flow at different incidences， thus the total pressure loss of the cascade is decreased. The best winglet scheme is changing with the various angles of incidence， and the most effective pressure side winglet is PW1.5 at angle of +6°， which provides the most significant aerodynamic loss reduction by 14.4% compared to original cascade at the same incidence.

Key words: Compressor cascade；Pressure side winglet；Incidences；Numerical simulation

吴宛洋,钟兢军,韩少冰. 变冲角下压力面小翼控制高亚声速扩压叶栅气动特性的研究[J]. 推进技术, 2018, 39(1): 76-85.

WU Wan-yang,ZHONG Jing-jun,HAN Shao-bing. Effects of Pressure Side Winglet on Aerodynamic Performance of High Subsonic Compressor Cascade with Different Incidences[J]. Journal of Propulsion Technology, 2018, 39(1): 76-85.

参考文献

[1] Wbitcomb R T. A Design Approach and Selected Wind-Tunnel Results at High Subsonic Speeds for Wing-Tip Mounted Winglet[R]. NASA TN D-8260.
[2] 汪建文, 贾瑞博, 吴克启, 等. 小翼对风力机叶片表面压力分布的影响[J]. 工程热物理报, 2006, 27(5):760-762.
[3] Holten V. Windmill with Diffuser Effect Induced by Small Tip Vanes[C]. Cambridge: Proc.Int System.Wind Energy Syst, 1976.
[4] 崔承根, 施能继. 叶梢带端板螺旋桨的性能研究[J]. 华中理工大学学报, 1991, 19(3): 117-120.
[5] Booth T C, Dodge P R. Rotor-Tip Leakage, Part Ⅰ: Basic Methodology[J]. ASME Journal of Engineering for Power, 1982, 104: 154-161.
[6] Bindon J P. The Measurement and Formation of Tip Clearance Loss[J]. Journal of Turbomachinery, 1989, 111(7): 257-263.
[7] 王生武, 石秀华. 涡轮叶尖压力边小翼肋条对泄漏流场的数值模拟[J]. 计算机测量与控制, 2009, 17(8): 78-81.
[8] 韩少冰, 钟兢军. 具有叶尖小翼的压气机叶栅间隙流动分析[J]. 工程热物理学报, 2012, 33(9): 1492-1496.
[9] 钟兢军, 韩吉昂, 严红明, 等. 压气机动叶叶尖小翼[P]. 中国专利:ZL200810010515.4, 2010.
[10] 钟兢军, 韩少冰. 融合式叶尖小翼对低速压气机转子气动性能的影响[J]. 推进技术, 2014, 35(6): 749-757. (ZHONG Jing-jun, HAN Shao-bing. Effects of Blended Tip Winglet on Aerodynamic Performance of a Low Speed Compressor Rotor[J]. Journal of Propulsion Technology, 2014, 35(6): 749-757.)
[11] 韩少冰. 叶尖小翼控制压气机叶顶间隙流动的实验和数值研究[D]. 大连:大连海事大学, 2013.
[12] 吴宛洋, 钟兢军, 韩少冰. 叶尖小翼到高亚声速扩压叶栅气动特性影响的数值研究[J]. 大连海事大学学报, 2017, 42(2): 97-102.
[13] 韩少冰, 钟兢军, 陆华伟, 等. 叶尖泄漏与压气机叶栅三维角区分离相互作用的实验研究[J]. 推进技术, 2013, 34(2): 187-193. (HAN Shao-bing, ZHONG Jing-jun, LU Hua-wei, et al. Experimental Investigation on Interaction between Tip Clearance Flow and Three-Dimensional Separation in Compressor Cascade[J]. Journal of Propulsion Technology, 2013, 34(2):187-193.)
[14] Sakulkaew S, Tan C S, Donahoo E, et al. Compressor Efficiency Variation with Rotor Tip Gap from Vanishing to Large Clearance[J]. ASME Journal of Turbomachinery, 2013, 135.
[15] Inoue M, Kuroumaru M. Structure of Tip Clearance Flow in an Isolated Axial Compressor Rotor[J]. Journal of Turbomachinery, 1989, 111(2): 250-256.
[16] Inoue M, Kuroumaru M, Furukawa M. Behavior of Tip Leakage Flow Behind and Axial Compressor Rotor[J]. Journal of Engineering for Gas Turbines and Power, 1986, 108(1): 7-14.
[17] Inoue M, Kuroumaru M, Saiki K, et al. Physical Explanations of Tip Leakage Flow Field in an Axial Compressor Rotor[C]. USA: International Gas Turbine and Aeroengine Congress and Exhibition, 1998.
[18] Barth T J, Jespersen D. The Design and Application of Upwind Schemes on Unstructured Meshes Technical Report[R]. AIAA 89-0366.
[19] 阚晓旭. 矩形扩压叶栅中应用叶尖小翼的性能研究[D]. 大连:大连海事大学, 2012.　　　　　　　　　　　　　*　收稿日期:2017-04-15；修订日期:2017-05-15。基金项目:国家自然科学基金(51436002；51406021)；中央高校基本科研业务费专项资金资助(3132016014；3132017001)；辽宁省高等学校创新团队支持计划(LT2015004)；辽宁省博士科研启动基金(201601078)。作者简介:吴宛洋,女,博士生,研究领域为叶轮机械气动热力学。E-mail: wuwanyang900314@126.com(编辑:田佳莹)