轮缘封严气流与转子干涉损失机理的数值研究

推进技术 ›› 2018, Vol. 39 ›› Issue (11): 2481-2489.

轮缘封严气流与转子干涉损失机理的数值研究

杨帆,周莉,王占学

西北工业大学动力与能源学院，陕西西安 710129,西北工业大学动力与能源学院，陕西西安 710129,西北工业大学动力与能源学院，陕西西安 710129

发布日期:2021-08-15
基金资助:
国家自然科学基金(51876176；51576163)。

Numerical Investigation for Interaction and Loss Mechanisms Between Rim Seal Flow and Rotor

School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China and School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究涡轮转静盘腔中轮缘封严气流与下游转子的干涉机理和损失机制，在不同封严流量下，针对轮缘封严气流对下游转子气动性能和流场分布的影响进行了数值模拟。结果表明，随着封严流量增加，涡轮级效率不断降低。在轮毂到10%叶高和30%～60%叶高，流量系数增加。封严气流主要通过在转子进口封严出流不同的分布和在通道输运过程中与转子通道二次流的交互作用对转子的气动性能产生影响。同时，封严气流引起下游转子气动性能的降低，存在三个损失机制:一是封严腔体摩擦泵效应减弱，增加了封严出流与主流之间周向速度差所引起的粘性剪切损失；二是不同分布的封严出流造成进气负攻角和堵塞效应，降低了转子的做功能力；三是不同分布的封严出流在输运过程中与转子通道二次流的交互作用，导致了二次流损失加剧。

关键词: 轮缘封严；封严出流；转子；干涉；损失机制

Abstract: In order to investigate the interaction and loss mechanisms between turbine stator-rotor cavity rim seal flow and downstream rotor， numerical investigations were conducted for effects of rim seal flow on the aerodynamic performance and flow field of rotor at different rim seal flow rate. The results show that with the increase of rim seal flow rate， the stage efficiency keeps on decreasing. In addition， the mass flow coefficient increases in the region from hub to 10% span and from 30% to 60% span. The rim seal flow mainly influences the rotor performance by the different distributions of egress flow at rotor inlet and interaction with secondary flow in rotor passage. Besides， there are three loss factors related to the decreasing of rotor performance caused by rim seal flow. One is the viscous shear loss caused by increasing circumferential velocity difference between the rim seal flow and mainstream. The increasing circumferential velocity difference results from the reducing pump effect of the rotational disc with the increment of rim seal flow rate. Second is the blockage effects and negative incidence angle caused by egress flow lead to decreasing work. The last one is the interaction in transportation process between different egress flow and secondary flow in rotor passage results in increasing secondary loss.

Key words: Rim seal；Egress flow；Rotor；Interaction；Loss mechanism

杨帆,周莉,王占学. 轮缘封严气流与转子干涉损失机理的数值研究[J]. 推进技术, 2018, 39(11): 2481-2489.

YANG Fan,ZHOU Li,WANG Zhan-xue. Numerical Investigation for Interaction and Loss Mechanisms Between Rim Seal Flow and Rotor[J]. Journal of Propulsion Technology, 2018, 39(11): 2481-2489.

参考文献

[1] 张晶辉, 马宏伟. 轮缘封严气体对涡轮转子性能影响的非定常数值研究[J]. 推进技术, 2014, 35(4): 470-478. (ZHANG Jing-hui, MA Hong-wei. Unsteady Numerical Investigation for Effects of Rim Sealing Flow on Performance of a Turbine Rotor[J]. Journal of Propulsion Technology, 2014, 35(4): 470-478.)
[2] LIU Huo-xing, AN Yu-ge, ZOU Zheng-ping. Aerothermal Analysis of a Turbine with Rim Seal Cavity[R].ASME 2014-GT-25276.
[3] 周扬, 牛为民, 邹正平, 等. 轮毂封严气体对高压涡轮二次流动的影响[J]. 推进技术, 2006, 27(6): 515-520. (ZHOU Yang, NIU Wei-min, ZOU Zheng-ping, et al. Effects of Coolant Injection from Rim Seals on Secondary Flow in a High Pressure Turbine[J]. Journal of Propulsion Technology, 2006, 27(6): 515-520.)
[4] JIA Wei, LIU Huo-xing. Numerical Investigation of the Effects of Rim Seal on Turbine Aerodynamic Design Parameters and End Wall Flows in Low-Aspect Ratio Turbine [J]. Computer & Fluids, 2013, 74(5): 114-125.
[5] ZENG Jun, ZHANG Wei-tao. Numerical Simulation of the Interaction between Rim Seal and Main Annulus Flow in a Four Sage Low-Pressure Axial Turbine[R]. AIAA 2015-3416.
[6] Popovi? I, Hodson H P. The Effects of Parametric Variation of Rim Seal Geometry on the Interaction between Hub Leakage and Mainstream Flows in HP Turbine[R]. ASME 2012-GT-68025.
[7] Ong J, Miller R J, Uchida S. The Effects of Coolant Injection on the Endwall Flow of a High Pressure Turbine[J]. Journal of Turbomachinery, 2012, 134(5).
[8] 高庆, 李军. 间隙结构对轮缘密封封严性能及透平级气动性能影响的数值研究[J]. 西安交通大学学报, 2015, 49(3): 25-31.
[9] Reid K, Denton J, Pullan G, et al. The Effect of Stator-rotor Hub Sealing Flow on the Mainstream Aerodynamics of a Turbine[R]. ASME 2006-GT-90838.
[10] Pau M, Paniagua G. Investigation of the Flow Field on a Transonic Turbine Nozzle Guide Vane with Rim Seal Cavity Flow Ejection[J]. Journal of Fluid Engineering, 2010, 133(11).
[11] Ong J, Miller R J, Uchida S. The Effect of Coolant Injection on the Endwall Flow of a High Pressure Turbine [J]. Journal of Turbomachinery, 2012, 134(5).
[12] Zlatinov M B, Tan V S, Montgomery M et al. Turbine Hub and Shroud Sealing Flow Loss Mechanisms[J]. Journal of Turbomachinery, 2012, 134(11): 1-12.
[13] Schrewe S, Werschnik H, Schiffer H P. Experimental Analysis of the Interaction between Rim Seal and Main Annulus Flow in a Low Pressure Two Stage Axial Turbine[R]. ASME 2013-GT-051003.
[14] JIA Wei, LIU Huo-xing. Numerical Investigation of the Interaction between Upstream Purge Flow and Mainstream in a Highly-Loaded Turbine[R]. ASME 2014-GT-25276.
[15] Behr T. Control of Rotor Tip Leakage and Secondary Flow by Casing AIR Injection in Unshrouded Axial Turbines[D]. Dresden: Dresden University of Technology, 2007.
[16] Schuepbach P, Abhari R S, Rose M G, et al. Sensitivity of Turbine Efficiency and Flow Structures to Varying Purge Flow[J]. Journal of Propulsion and Power, 2010, 26(1): 46-56.
[17] Schuepbach P. Influence of Rim Seal Purge Flow on Performance of an End Wall Profiled Axial Turbine [D]. Swiss: Swiss Federal Institute of Technology, 2009.
[18] Green B R, Mathison R M, Dunn M G. Time-Averaged and Time-Accurate Aerodynamic Effects of Rotor Purge Flow for a Modern, One and One-Half Stage High-Pressure Turbine, Part II: Analytical Flow Field Analysis[J]. Journal of Turbomachinery, 2014, 136(1): 1-10.(编辑:梅瑛)　　　　　　　　　　　　　　收稿日期:2017-10-10；修订日期:2017-11-16。基金项目:国家自然科学基金(51876176；51576163)。通讯作者:杨帆,男,博士生,研究领域为叶轮机械内复杂流动。E-mail: 1415515954@qq.com