一种低速风洞大流量进气道试验系统研制

推进技术 ›› 2018, Vol. 39 ›› Issue (12): 2839-2844.

一种低速风洞大流量进气道试验系统研制

唐滨滨,李长坤

中国航空工业空气动力研究院气动研究与试验三部，黑龙江哈尔滨 150001,中国航空工业空气动力研究院气动研究与试验三部，黑龙江哈尔滨 150001

发布日期:2021-08-15

Development of a Large Mass Flow Inlet Test System in Low Speed Wind Tunnel

The 3rd Aerodynamic Research and Test Department，AVIC Aerodynamics Research Institute，Harbin 150001，China and The 3rd Aerodynamic Research and Test Department，AVIC Aerodynamics Research Institute，Harbin 150001，China

Published:2021-08-15

摘要/Abstract

摘要： 为了提高FL-8风洞进气道试验能力，结合该风洞特点，在不破坏原有进气道试验系统前提下，研制了一路大流量进气道试验系统，采用直线形式布置在风洞中心，引射混合气体扩压减速后排入风洞扩散段内。该系统可实现进气道流场模拟、性能测量、流量控制与测量。为了验证该系统性能，在FL-8风洞进行试验验证了引射器的引射能力，排气对风洞流场的影响以及流量的控制与测量精度。该系统测量精度高，流量测量精度达到0.3%以上引射能力强，排气对风洞流场影响小，可模拟单路流量2.8kg/s，较原FL-8进气道试验能力提高50%以上，并且与原FL-8进气道试验系统结合使用，可实现三路进气道同时模拟。

关键词: 进气道；风洞试验；大流量；引射；性能测量

Abstract: A large mass flow inlet test system was developed in the FL-8 wind tunnel to improve its test ability. According to the condition，the system was set in the center of the wind tunnel and ejected mixed air into the diffusion section without destroying the original one. The system can perform all kinds of inlet test functions including inlet flow field simulation，performance measurement，flow control and measurement. In order to verify the performance of the system，a test was carried out. Results show that the system has high measurement accuracy，ejection ability and exhaust air has little influence on the wind tunnel flow field. The flow measurement accuracy achieve 0.3% and the inlet test system achieves maximum 2.8kg/s，which leads to a 50% capacity increase and can carry out three inlet test simultaneously.

Key words: Inlet；Wind tunnel test；Large mass flow；Ejecting；Performance measurement

唐滨滨,李长坤. 一种低速风洞大流量进气道试验系统研制[J]. 推进技术, 2018, 39(12): 2839-2844.

TANG Bin-bin,LI Chang-kun. Development of a Large Mass Flow Inlet Test System in Low Speed Wind Tunnel[J]. Journal of Propulsion Technology, 2018, 39(12): 2839-2844.

参考文献

[1] Angus R Smith, Richard Thorne, Gouttenoire C, et al. Aerodynamic Aspects of Application of Negative Scarf Intake to High Bypass Ratio Civil Turbofans[R]. AIAA 2005-4205.
[2] Montétagaud F, Montoux S. Negative Scarfed Intake: Design and Acoustic Performance[R]. AIAA 2005-2944.
[3] Arend D J, Castner R S, Frate F C, et al. A Low Cost, Compact and Versatile Rig for Integrated Inlet and Propulsion Systems Research[R]. AIAA 2006-1313.
[4] Chima R V, Arend D J, Castner R S, et al. CFD Models of a Serpentine Inlet, Fan, and Nozzle[R]. AIAA 2010-33.
[5] Melissa B Carter, Patrick R Sheay, Flamm J D, et al. Experimental Evaluation of Inlet Distortion on an Ejector Powered Hybrid Wing Body at Take-Off and Landing Conditions[R]. AIAA 2016-0010.
[6] 樊建超, 华杰, 于昆龙, 等. FL-24风洞埋入式进气道试验技术[J]. 实验流体力学, 2008, 22(1): 92-94.
[7] 巫朝君, 聂博文, 孔鹏, 等. 战斗机进气道非定常性能试验技术[J]. 实验流体力学, 2017, 31(2): 98-103.
[8] 巫朝君, 孔鹏, 王勋年, 等. 基于张线尾撑的进气道低速风洞试验技术研究[J]. 试验流体力学, 2012, 26(2): 86-89.
[9] 欧平, 陈强, 田晓虎, 等. 双发进气道抽吸试验系统及流量高精度测量技术[J]. 空气动力学学报, 2016, 34(3): 392-397.
[10] 陈光. 高涵道比涡轮风扇发动机发展综述[J]. 航空制造技术, 2008, 51(13): 40-45.
[11] 李杰. 世界商用飞机发动机的发展与展望[J]. 航空科学技术, 2008, 19(5): 3-5.
[12] Jose Angel Hernanz Manrique, Miguel Angel Gallego Lorenzo, Bruce Bouldin. CFD Analysis and Full Scale Wind Tunnel and Flight Testing of a Complex Auxiliary Power Unit Intake System[R]. AIAA 2015-3796.
[13] 孔德英, 邓文剑, 方力. 一种背负式 S 弯进气道辅助进气门设计[J]. 航空科学技术, 2016, 27(12): 01-07.
[14] 刘政崇. 高低速风洞气动与结构设计[M]. 北京:国防工业出版社, 2004.
[15] 伍荣林, 王振羽. 风洞设计原理[M]. 北京:北京航空学院出版社, 1985.
[16] 华绍曾, 杨学宁. 实用流体阻力手册[M]. 北京:国防工业出版社, 1985.
[17] 吴继平, 陈健, 王振国. 多喷嘴超声速引射器启动性能试验[J]. 推进技术, 2008, 29(2): 174-178. (WU Ji-ping, CHEN Jian, WANG Zhen-guo. Experiment on Starting Performance of Multi-Nozzle Supersonic Ejector[J]. Journal of Propulsion Technology, 2008, 29(2): 174-178.)
[18] 吴继平, 陈健, 王振国. 多喷嘴超声速引射器压力匹配性能试验研究[J]. 国防科技大学学报, 2007, 29(5): 5-9.
[19] 缪亚芹, 王锁芳, 吴恒刚. 多喷管引射器试验研究与数值模拟[J]. 南京师范大学学报, 2006, 6(2): 68-71.
[20] 王广振, 吴寿生, 王之珊, 等. 混合管面积和位置对排气引射器性能的影响[J]. 推进技术, 2000, 21(4). (WANG Guang-zhen, WU Shou-sheng, WANG Zhi-shan, et al. Effect of Mixing Tube Area and Position on Performances for Lobed Ejector[J]. Journal of Propulsion Technology, 2000, 21(4).)(编辑:史亚红)　　　　　　　　　　　　　　收稿日期:2017-10-26；修订日期:2018-01-22。通讯作者:唐滨滨,女,硕士,工程师,研究领域为进气道气动热力学与试验技术。E-mail: tbbari@163.com