高阻塞比肋化通道对流换热特性实验研究

推进技术 ›› 2018, Vol. 39 ›› Issue (2): 335-341.

高阻塞比肋化通道对流换热特性实验研究

周明轩¹,薛树林¹,贺宜红²,李维²,杨卫华¹

南京航空航天大学能源与动力学院，江苏南京 210016,南京航空航天大学能源与动力学院，江苏南京 210016,中国航发湖南动力机械研究所，湖南株洲 421002,中国航发湖南动力机械研究所，湖南株洲 421002,南京航空航天大学能源与动力学院，江苏南京 210016

发布日期:2021-08-15
作者简介:周明轩，男，硕士生，研究领域为飞机发动机热端部件热防护技术。
基金资助:
国家自然科学基金(51276088)。

Experimental Investigation on Convective Heat Transfer Characteristics of High Blockage Ribs Channel

College of Energy and Power Engineering，Nanjing University of Astonautics and Aeronautics ，Nanjing 210016，China,College of Energy and Power Engineering，Nanjing University of Astonautics and Aeronautics ，Nanjing 210016，China,AECC Hunan Aviation Powerplant Research Institute，Zhuzhou 412002，China,AECC Hunan Aviation Powerplant Research Institute，Zhuzhou 412002，China and College of Energy and Power Engineering，Nanjing University of Astonautics and Aeronautics ，Nanjing 210016，China

Published:2021-08-15

摘要/Abstract

摘要： 采用实验方法对高阻塞比肋化通道的对流换热特性进行了研究。实验的Re数为1400～4500，肋高(e)和通道水力直径(H)的比值(e/H)为0.2和0.33，肋间距(S)与肋高(e)的比值(S/e)为5， 10和15。肋化通道中的肋有顺排和叉排两种排列形式。研究结果表明:(1)随着阻塞比和Re数的增加，对流换热系数逐渐增大，但相应的流动损失亦不断升高。(2)无论是顺排还是叉排肋化通道，在肋间距比分别为5，10和15三种情况下，间距比为10的对流换热系数和流阻损失均高于其它两种情况。(3)在实验几何参数范围内，顺排肋化通道的对流换热系数和流动压损均高于叉排通道。

关键词: 涡轮叶片；肋化通道；对流换热；实验研究

Abstract: The convective heat transfer characteristics on high blockage ribs channel are measured by experimental method. Reynolds number studied in this experiment is from 1400 to 4500. The rib height(e) to hydraulic diameter(H) ratios are 0.2 and 0.33， respectively. The rib spacing(S) to rib height(e) ratios(S/e) are 5， 10 and 15. The rib orientations in the ribs channel are symmetric and staggered arrangement. The experimental results show that: (1)The convective heat transfer coefficients increased with the increase of rib height and Reynolds number， though at the cost of higher pressure losses. (2)When the rib spacing to height ratio(S/e) is 10， it keeps a highest heat transfer coefficient and flow pressure loss in three kinds of rib spacing to height ratio 5， 10 and 15. (3)The convective heat transfer coefficient and flow pressure loss in symmetric arrangement ribs channel are higher than that in the staggered arrangement ribs channel.

Key words: Turbine blade；Rib channel；Convective heat transfer；Experimental investigation

周明轩,薛树林,贺宜红,李维,杨卫华. 高阻塞比肋化通道对流换热特性实验研究[J]. 推进技术, 2018, 39(2): 335-341.

ZHOU Ming-xuan¹,XUE Shu-lin¹,HE Yi-hong²,LI Wei²,YANG Wei-hua¹. Experimental Investigation on Convective Heat Transfer Characteristics of High Blockage Ribs Channel[J]. Journal of Propulsion Technology, 2018, 39(2): 335-341.

参考文献

[1] Liou T, Hwang J. Effect of Ridge Shapes on Turbulent Heat Transfer and Friction in a Rectangular Channel[J].International Journal of Heat Mass Transfer, 1993, 136: 931-940.
[2] Han J C, Glicksman L R, Rohsenow W M. An Investigation of Heat Transfer and Friction for Rib-Roughened Surfaces[J]. International Journal of Heat Mass Transfer, 1978, (2): 1143-1156.
[3] Taslim M E, Li T, Kercher D M. Experimental Heat Transfer and Friction in Channels Roughened with Angled, V-Shaped, and Discrete Ribs on Two Opposite Walls[J]. ASME Journal of Turbomachinery, 1996, 118: 20-28.
[4] Kim K M, Lee H, Kim B S. Optimal Design of Angled Rib Turbulators in a Cooling Channel[J]. International Journal of Heat Mass Transfer, 2009, 45: 1617-1625.
[5] Astarita T, Cardone G. Convective Heat Transfer in a Square Channel with Angled Ribs on Two Opposite Walls[J]. Experiment Fluids, 2003, 34: 625-634.
[6] Taslim M E, Liu H A. A Combined Numerical and Experimental Study of Heat Transfer in a Roughened Square Channel with 45° Ribs[J]. International Journal of Rotating Machine, 2005, (1): 60-66.
[7] Han J C. Heat Transfer and Friction Characteristics in Rectangular Channels with Rib Turbulators[J]. ASME Journal of Heat Transfer, 1988, 110: 321-328.
[8] Han J C, Dutta S, Ekkad S V. Gas Turbine Heat Transfer and Cooling Technology[M]. New York: Taylor & Francis, 2000.
[9] Wagner J H, Johnson B V, Hajek T J. Heat Transfer in Rotating Passages with Smooth Walls and Radial Outward Flow[J]. ASME Journal of Turbomachinery, 1991, 113: 42-51.
[10] Wagner J H, Johnson B V, Kooper F C. Heat Transfer in Rotating Passage with Smooth Walls[J]. ASME Journal of Turbomachinery, 1991, 113: 321-330.
[11] Han J C, Zhang Y M, Kalkuehler K. Uneven Wall Temperature Effect on Local Heat Transfer in a Rotating Two-Pass Square Channel with Smooth Walls[J]. ASME Journal of Heat Transfer, 1993, 115: 912-920.
[12] Bailey J C, Bunker R S. Heat transfer and Friction with Very High Blockage 45° Staggered Turbulators[R].ASME GT 2003-38611.
[13] Han J C. Heat Transfer and Friction in Channels with Two Opposite Rib Roughened Walls[J]. ASME Journal of Heat Transfer, 1984, 106: 774-781.
[14] Han J C, Park J S. Developing Heat Transfer in Rectangular Channels with Rib Turbulators[J]. International Journal of Heat Mass Transfer, 1988, 31: 183-195.
[15] Dae Hyun Kim, Byung Ju Lee, Jung Shin Park, et al. Effects of Inlet Velocity Profile on Flow and Heat Transfer in the Entrance Region of a Ribbed Channel[J]. International Journal of Heat Mass Transfer, 2016, 92: 838-849.
[16] Maurer M, Wolfersdorf J, Gritsch M. Experimental and Numerical Study of Heat Transfer and Pressure Loss in a Rectangular Channel with V-Shaped Ribs[R]. ASME GT 2006-90006.
[17] Maurer M, Wolfersdorf J, Gritsch M. An Experimental and Numerical Study of Heat Transfer and Pressure Losses of V- and W-Shaped Ribs at High Reynolds Numbers[R]. ASME GT 2007-27167.
[18] 裘云, 朱惠人, 许都纯, 等. 带肋壁与出流孔内流通道的流阻特性[J]. 推进技术, 2003, 24(4): 341-343. (QIU Yun, ZHU Hui-ren, XU Du-chun, et al. Pressure Loss of the Internal Passage with Rib Turbulators and Suction Holes[J]. Journal of Propulsion Technology, 2003, 24(4): 341-343.)
[19] 邓宏武, 陶智, 徐国强, 等. 旋转带肋U型通道内流动与换热的数值模拟[J]. 推进技术, 2005, 26(4):296-301. (DENG Hong-wu, TAO Zhi, XU Guo-qiang, et al. Simulation of Turbulent Flow and Heat Transfer in a Rotating Ribbed Serpentine Passage[J]. Journal of Propulsion Technology, 2005, 26(4): 296-301.)
[20] 朱强华, 崔苗, 高效伟. 肋开孔高度对大宽高比矩形通道流动传热的影响[J]. 推进技术, 2014, 35(12): 1631-1638. (ZHU Qiang-hua, CUI Miao, GAO Xiao-wei. Effects of Holes Height on Flow and Heat Transfer in a Ribbed Rectangular Channel with Large Aspect Ratio[J]. Journal of Propulsion Technology. 2014, 35(12): 1631-1638.)
[21] Weihua Yang, Xue Liu, Guohui Li, et al. Experimental Investigation on Heat Transfer Characteristics of Film Cooling Using Parallel-Inlet Holes[J]. International Journal of Thermal Sciences, 2012, 60: 32-40.
[22] Holman J P. Experimental Methods for Engineerings[M]. New York: McGraw_Hill, 1984.
[23] Holman J P. Heat Transfer[M]. Beijing: China Machine Press, 2005.(编辑:史亚红)　　　　　　　　　　　　　*　收稿日期:2016-11-05；修订日期:2016-12-07。基金项目:国家自然科学基金(51276088)。作者简介:周明轩,男,硕士生,研究领域为飞机发动机热端部件热防护技术。E-mail: yangwh-sjtu@163.com