RBCC发动机燃料支板热防护研究

推进技术 ›› 2018, Vol. 39 ›› Issue (2): 351-357.

RBCC发动机燃料支板热防护研究

鄢德堃,何国强,秦飞,李文强,张铎

西北工业大学航天学院，陕西西安 710072,西北工业大学航天学院，陕西西安 710072,西北工业大学航天学院，陕西西安 710072,西北工业大学航天学院，陕西西安 710072,西北工业大学航天学院，陕西西安 710072

发布日期:2021-08-15
作者简介:鄢德堃，男，博士生，研究领域为航空宇航推进理论与工程。

Research on Thermal Protection of Pylon in RBCC

School of Astronautics，Northwestern Polytechnical University，Xi’an 710072，China,School of Astronautics，Northwestern Polytechnical University，Xi’an 710072，China,School of Astronautics，Northwestern Polytechnical University，Xi’an 710072，China,School of Astronautics，Northwestern Polytechnical University，Xi’an 710072，China and School of Astronautics，Northwestern Polytechnical University，Xi’an 710072，China

Published:2021-08-15

摘要/Abstract

摘要： 分析了RBCC发动机在5.5Ma条件下不同工作模式时燃料支板所处的热环境，综合火箭射流以及二次燃烧对热环境的影响，设计了带有冷却通道的燃料支板主动热防护方案。研究发现燃料支板在火箭冲压工作模式下受火箭羽流以及二次燃烧双重加热的影响，热环境最为恶劣，燃料喷注所形成的液膜可以对支板中部起到保护作用，壁面温度沿气流方向整体呈“高-低-高”的分布趋势。在此种工作模式下开展了三种冷却通道方案的对比研究，结果表明通道数及单通道流量增加均可以降低受热严峻部位的表面温度，提高支板表面温度的均匀性，保障发动机长时间安全工作。采用开环冷却后的煤油组织燃烧，发动机比冲性能具有1.5%的提高。

关键词: 火箭基组合循环；燃料支板；热环境；主动冷却；数值模拟

Abstract: Analysis of rocket jet and secondary combustion to thermal environment on pylon under high thermal load was carried out for RBCC engine at Mach 5.5 with different operating mode and active thermal scheme was designed. At the rocket-scramjet mode， pylon was heated by rocket plume and secondary combustion whose thermal environment was the most serious which presents a trend of “high-low-high” in the direction of flow because the protection of film formed by fuel injection. Based on rocket-scramjet working mode， comparing three kinds of channel layout found that increasing number of channels and flow rate would improve cooling effect at severe highly heated parts and uniformity of temperature distribution which kept the engine work stably for a long time. Adopting kerosene after cooling makes engine thrust increase 1.5%.

Key words: Rocket based combined cycle；Pylon；Thermal environment；Active cooling；Numerical simulation

鄢德堃,何国强,秦飞,李文强,张铎. RBCC发动机燃料支板热防护研究[J]. 推进技术, 2018, 39(2): 351-357.

YAN De-kun,HE Guo-qiang,QIN Fei,LI Wen-qiang,ZHANG Duo. Research on Thermal Protection of Pylon in RBCC[J]. Journal of Propulsion Technology, 2018, 39(2): 351-357.

参考文献

[1] 秦飞, 吕翔, 刘佩进, 等. 火箭基组合推进研究现状与前景[J]. 推进技术, 2010, 31(6): 660-665. (QIN Fei, LV Xiang, LIU Pei-jin, et al . Research Status and Perspective of Rocket Based Combined Cycle Propulsion System[J]. Journal of Propulsion Technology, 2010, 31(6): 660-665.)
[2] Stechman R C, Allen R C. History of Ramjet Propulsion Development at the Marquardt Company-1944 to 1970[R]. AIAA 2005-3538.
[3] Tetsuo Hiraiwa, Katsuhiro Ito, Shigeru Sato, et al. Recent Progress in Scramjet/Combined Cycle Engines at JAXA, Kakuda Space Center[J]. Acta Astronautica, 2008, 63(5-6): 565-574.
[4] Takeshi, Kanda, Kenji Kudo. A Concept Study of a Combined Cycle Engine for an Aerospace Plane[R]. AIAA 2002-5146.
[5] 何国强, 徐朝启, 秦飞, 等. 基于直扩流道构型的RBCC发动机亚燃模态高效燃烧组织研究[J]. 推进技术, 2013, 34(8): 1064-1070. (HE Guo-qiang, XU Chao-qi, QIN Fei, et al. Research on Ramjet-Mode Combustion Organization Based on Constant-Expansion Area Configuration in RBCC Combustor[J]. Journal of Propulsion Technology, 2013, 34(8): 1064-1070.)
[6] 潘科玮, 何国强, 秦飞, 等. RBCC亚燃模态掺混与燃烧数值模拟研究[J]. 推进技术, 2012, 33(6): 907-913. (PAN Ke-wei, HE Guo-qiang, QIN fei, et al. Study on Mixing and Combustion of Kerosene Fuel in Ramjet Mode of RBCC Engine[J]. Journal of Propulsion Technology, 2012, 33(6): 907-913.)
[7] Robert Faulkner. The Evolution of the Hyset Hydrocarbon Fueled Scramjet Engine[R]. AIAA 2003-7005.
[8] Hank J M, Murphy J S, Mutzman R C. The X-51A Scramjet Engine Flight Demonstration Program[R]. AIAA 2008-2540.
[9] Marc Bouchez, Steffen Beyer. PTAH- SOCAR Fuel-Cooled Composite Materials Structure: 2009 Status[R]. AIAA 2009-7353.
[10] Nils Droske, Felix J Forster. Investigation of Heat Loads onto an Internally Cooled Strut Injector for Scramjet Application[R]. AIAA 2015-3555.
[11] Fengquan Zhong, Tongying Chen. Three-Dimensional Heat Transfer Analysis and Optimized Design of Actively Cooled Strut for Scramjet Applications[R]. AIAA 2012-3926.
[12] HUANG Z, ZHU Y H, JIANG P X, et al. Investigation of a Porous Transpiration-Cooled Strut Injector[J]. Journal of Propulsion and Power, 2015, 31(1): 278-285.
[13] 袁双, 李强, 秦飞, 等. RBCC发动机亚燃模态热环境分析[J]. 科学技术与工程, 2012, (5).
[14] 王浩泽, 李江, 秦飞, 等. RBCC发动机主被动复合热防护方案研究[J]. 固体火箭技术, 2015, (2).
[15] 孙冰, 郑力铭. 超燃冲压发动机支板热环境及热防护方案[J]. 航空动力学报, 2006, 21(4).
[16] 宋冈霖, 田亮, 冮强, 等. 超燃冲压发动机支板热性能研究[J]. 推进技术, 2013, 34(6): 809-816. (SONG Gang-lin, TIAN Liang, GANG Qiang, et al. A Study for Scramjet Strut Thermal Performance[J]. Journal of Propulsion Technology, 2013, 34(6): 809-816.)
[17] Malo-Molina F, Gaitonde D, Ebrahimi H. Numerical Investigation of a 3-D Chemically Reacting Scramjet Engine at High Altitudes Using JP8-Air Mixtures[R]. AIAA 2005-1435.
[18] 汤祥. RBCC支板火箭超燃模态动态过程与性能研究[D]. 西安:西北工业大学, 2015.
[19] 范学军, 俞刚. 大庆RP-3航空煤油热物性分析. 推进技术[J]. 2006, 27(2): 187-192. (FAN Xue-jun, YU Gang. Analysis of Thermophysical Properties of DaQing RP-3 Aviation Kerosene[J]. Journal of Propulsion Technology, 2006, 27(2): 187-192.)(编辑:张荣莉)　　　　　　　　　　　　　*　收稿日期:2016-12-22；修订日期:2017-02-21。作者简介:鄢德堃,男,博士生,研究领域为航空宇航推进理论与工程。E-mail: 18706757605@163.com