基于应力应变场强法的轮盘疲劳可靠性分析方法

推进技术 ›› 2018, Vol. 39 ›› Issue (2): 433-439.

基于应力应变场强法的轮盘疲劳可靠性分析方法

陈志英,谷裕,周平,王朝

北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191

发布日期:2021-08-15
作者简介:陈志英，男，博士，教授，研究领域为发动机结构强度可靠性及多学科优化。

Fatigue Reliability Analysis of Disk Based on Stress-Strain Field Intensity Method

School of Energy and Power Engineering，Beihang University，Beijing 100191，China,School of Energy and Power Engineering，Beihang University，Beijing 100191，China,School of Energy and Power Engineering，Beihang University，Beijing 100191，China and School of Energy and Power Engineering，Beihang University，Beijing 100191，China

Published:2021-08-15

摘要/Abstract

摘要： 为了更精确地进行航空发动机轮盘的疲劳可靠性分析，考虑缺口区域应力应变分布对疲劳寿命的影响，通过有限元模拟试验确定材料场径，采用应力应变场强法对轮盘进行确定性疲劳寿命分析。考虑场强因子及各参数的随机性，利用分布式协同响应面建立疲劳可靠性分析模型，并建立基于应力应变场强法的轮盘疲劳可靠性分析流程。结果显示:99.90%可靠度下的轮盘疲劳寿命为9595循环，相比确定性安全寿命6557循环，轮盘具有一定的寿命裕度。而应力应变场强法与传统方法理论分析结果相比，传统方法分析结果偏小，趋于保守。验证了基于应力应变场强法进行结构疲劳可靠性分析的合理性。

关键词: 应力应变场强法；轮盘疲劳寿命；分布式协同响应面；可靠性分析

Abstract: In order to analyze the fatigue reliability of aeroengine disk more accurately， the influence of stress and strain distribution of notch vicinity on the fatigue life is considered. The material field radius is determined by finite element simulation and the deterministic fatigue life of disk is analyzed by stress-strain field intensity method. Considering the randomness of the field intensity and other parameters， the fatigue reliability model is established by using the distributed collaborative response surface， and the fatigue reliability analysis process of disk is subsequently proposed based on stress-strain field intensity method. The results show that the fatigue life of disk is 9595 cycles when the reliability is 99.90% and the disk has life margin compared with deterministic safe life which is 6557 cycles. By comparing the stress-strain field method with the traditional local stress-strain method， the theoretical analysis result of the traditional method is small and tends to be conservative. The rationality of structural fatigue reliability analysis based on stress-strain field method is verified.

Key words: Stress-strain field intensity method；Fatigue life of disk；Distributed collaborative response surface；Reliability analysis

陈志英,谷裕,周平,王朝. 基于应力应变场强法的轮盘疲劳可靠性分析方法[J]. 推进技术, 2018, 39(2): 433-439.

CHEN Zhi-ying,GU Yu,ZHOU Ping,WANG Chao. Fatigue Reliability Analysis of Disk Based on Stress-Strain Field Intensity Method[J]. Journal of Propulsion Technology, 2018, 39(2): 433-439.

参考文献

[1] 陈光. 航空发动机结构设计分析[M]. 北京:北京航空航天大学出版社, 2014: 561-627.
[2] 姚卫星. 结构疲劳寿命分析[M]. 北京:国防工业出版社, 2003.
[3] 杨俊张, 贵斌, 祁圣英, 等. 发动机高压两级涡轮盘联合低循环疲劳寿命试验[J]. 燃气涡轮试验与研究, 2012, 25(1): 9-13.
[4] 杨俊, 张贵斌, 祁圣英. 涡轮盘传动臂销钉孔低循环疲劳寿命分析[J]. 机械科学与技术, 2011, 30(9): 1491-1494.
[5] 胡殿印, 裴月, 王荣桥, 等. 涡轮盘低循环疲劳的概率设计[J]. 推进技术, 2008, 29(4): 482-487. (HU Dian-yin, PEI Yue, WANG Rong-qiao, et al. Probabilistic Design of Low Cycle Fatigue for Turbine Disk[J]. Journal of Propulsion Technology, 2008, 29(4): 482-487.)
[6] 石亮, 魏大盛, 王延荣. 考虑应力梯度的轮盘疲劳寿命预测[J]. 航空动力学报, 2013, 28(6): 1236-1242.
[7] Yao W X. Stress-Field Intensity Approach for Predicting Fatigue Life[J]. International Journal of Fatigue, 1993, 15(3): 243-245.
[8] Yao W X. The Prediction of Fatigue Behaviours by Stress Field Intensity Approach[J]. Acta Mechanics Solids Sinica, 1996, 9(4): 337-349.
[9] 尚德广, 王大康, 李明, 等. 随机疲劳寿命预测的局部应力应变场强法[J]. 机械工程学报, 2002, 38(1): 67-70.
[10] 张成成, 姚卫星. 典型缺口件疲劳寿命分析方法[J]. 航空动力学报, 2013, 28(6): 1223-1230.
[11] 李岩, 李旭东, 夏天翔, 等. 采用应力场强法对某型航空发动机压气机轮盘的疲劳寿命评估及试验研究[J]. 工程力学, 2016, 33(7): 220-226.
[12] 高阳. 涡轮盘低循环疲劳可靠性设计方法[J]. 航空发动机, 2011, 37(1): 1-5.
[13] 唐俊星, 陆山. 轮盘应变疲劳寿命可靠性分析方法[J]. 推进技术, 2005, 26(4): 344-347. (TANG Jun-xing, LU Shan. Reliability Analysis Method for the Strain Fatigue Life of a Disk[J]. Journal of Propulsion Technology, 2005, 26(4): 344-347.)
[14] 牟园伟, 陆山. 轮盘低周疲劳概率寿命预估模型[J]. 推进技术, 2012, 32(2): 288-292. (MU Yuan-wei, LU Shan. Low Cycle Fatigue Probabilistic Life Prediction Models for Fan Disk[J]. Journal of Propulsion Technology, 2012, 32(2): 288-292.)
[15] Chang LI, Xing HAN. Analysis of Reliability Sensitivity for Gear Engagement Based on Response Surface Methods[J]. Journal of Aerospace Power, 2011, 26(3): 711-715.
[16] 费成巍, 白广忱. 基于 DCRSM 的 HPT 叶尖径向运行间隙可靠性分析[J]. 航空学报, 2013, 34(9): 2141-2149.
[17] Gao H, Bai G, Gao Y, et al. Reliability Analysis for Aeroengine Turbine Disc Fatigue Life with Multiple Random Variables Based on Distributed Collaborative Response Surface Method[J]. Journal of Central South University, 2015, 22(12): 4693-4701.
[18] 彭茂林, 杨自春, 曹跃云. 应变场强法在涡轮盘-片结构寿命预测中的应用[J]. 中国电机工程学报, 2011, 31(26): 97-102.
[19] 蔚夺魁, 邵丕仁. 某型发动机涡轮盘销钉孔边低循环疲劳寿命分析[J]. 航空发动机, 2000, 9(2): 37-41.
[20] 李伟, 董立伟, 蔡向晖, 等. 某型发动机涡轮盘销钉孔结构分析与寿命评估[J]. 航空动力学报, 2009, 24(8): 1699-1706.
[21] 裴月, 薛飞, 王荣桥. 涡轮盘低循环疲劳寿命可靠性研究[J]. 燃气涡轮试验与研究, 2007, 20(1): 39-43.　　　　　　　　　　　　　*　收稿日期:2017-01-11；修订日期:2017-02-28。作者简介:陈志英,男,博士,教授,研究领域为发动机结构强度可靠性及多学科优化。E-mail: chenzhiying@buaa.edu.cn(编辑:梅瑛)