当量比及航空煤油组分含量变化对喷嘴表面结焦积炭影响

推进技术 ›› 2018, Vol. 39 ›› Issue (2): 456-464.

当量比及航空煤油组分含量变化对喷嘴表面结焦积炭影响

韩伟东,周健阔,甘志文

北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191

发布日期:2021-08-15
作者简介:韩伟东，男，硕士生，研究领域为燃烧，航空发动机喷嘴技术。E-mail: hanweidong1991@126.com 通讯作者:甘志文，男，博士，副教授，研究领域为燃料燃烧、航空发动机燃烧室。

Impact of Equivalence Ratio and Aviation Kerosene Components on Nozzle Coking Deposition

School of Energy and Power Engineering，Beijing University of Aeronautics and Astronautics，Beijing 100191，China,School of Energy and Power Engineering，Beijing University of Aeronautics and Astronautics，Beijing 100191，China and School of Energy and Power Engineering，Beijing University of Aeronautics and Astronautics，Beijing 100191，China

Published:2021-08-15

摘要/Abstract

摘要： 针对喷嘴表面结焦积炭问题会对航空发动机整体性能及安全性能产生重要影响，以当量比及航煤组分含量变化作为影响因素，采用动态燃烧实验方式，研究燃烧工况变化和正十六烷及丁基苯在与纯航煤掺混后的混合油中其质量分数的变化对喷嘴表面结焦积炭产生的影响。实验后发现喷嘴表面的结焦积炭量随着当量比的减小呈现出不同的变化趋势，其中喷嘴附近燃烧区温度变化及燃气的卷吸和回流作用增强是影响结焦积炭量变化的主要因素。在本文实验工况下，当掺混比例均为10%时，混合油中丁基苯的质量分数变化对结焦积炭量影响比同掺混比例下正十六烷大19%。并且在SEM(Scanning Electron Microscope)分析后发现，燃油小液滴及游离碳氢微团在燃烧态条件下通过高温裂解结焦过程，在喷嘴表面形成了复杂无序和疏松多孔的网片状结构，包括短丝状焦和颗粒球状焦炭的沉积和附着。因此适当的燃烧当量比及航煤中组分含量的变化，可减少喷嘴表面结焦积炭的沉积附着。

关键词: 喷嘴；结焦积炭；正十六烷；丁基苯；当量比；燃料组分

Abstract: For the effects of nozzle coking on overall performance and safety of aircraft engines， the dynamic combustion experiments were carried out to investigate the effects of combustion condition and mass fraction of n-hexadecane and butylbenzene on nozzle coking deposition， while the equivalence ratio and fuel components variation being conducted as experiment factors. It shows that the amount of coking and carbon deposition on nozzle surface has different features with decrease of equivalence ratio， and combustion zone temperature and extent of entrainment and counterflow are the main factors on coking deposition amount. The influence of butylbenzene on nozzle coking deposition amount is 19% bigger than hexadecane under the same blending ratio， which is equal to 10% when mixed with RP-3. SEM (Scanning Electron Microscope) results show that fuel droplets and dissociative hydrocarbon form complicated and porous network structure， and it includes deposition and adsorption of short filamentous coking and amorphous coking. Thus， the amount of coking deposition on nozzle can be decreased under a proper extent of equivalence ratio and fuel components variation.

Key words: Nozzle；Coking deposition；Hexadecane；Butylbenzene；Equivalence ratio；Fuel compoment

韩伟东,周健阔,甘志文. 当量比及航空煤油组分含量变化对喷嘴表面结焦积炭影响[J]. 推进技术, 2018, 39(2): 456-464.

HAN Wei-dong,ZHOU Jian-kuo,GAN Zhi-wen. Impact of Equivalence Ratio and Aviation Kerosene Components on Nozzle Coking Deposition[J]. Journal of Propulsion Technology, 2018, 39(2): 456-464.

参考文献

[1] Epstein A H. Aircraft Engines’ Needs from Combustion Science and Engineering[J]. Combustion and Flame,2012, 159(5): 1791-1792.
[2] 林宇震, 许全宏, 刘高恩. 燃气轮机燃烧室[M]. 北京:国防工业出版社, 2008: 17-18.
[3] Bruening G B, Chang W S. Cooled Cooling Air Systems for Turbine Thermal Management[R]. ASME 99-GT-14.
[4] 周婷雅, 李江弘, 谭若樵. 正十七烷与正十八烷对航空煤油理化性能及液滴平均直径的影响[J]. 航空动力学报, 2016, 31(5): 1133-1141.
[5] Pandey R K, Rehman A, Sarviya R M. Impact of Alternative Fuel Properties on Fuel Spray Behavior and Atomization[J]. Renewable and Sustainable Energy Reviews, 2012, 16(3): 1762-1788.
[6] Chin J S, Lefebvre A H. Influence of Fuel Chemical Properties on Soot Emission from Gas Turbine Combustors[R]. ASME 89-GT-261.
[7] 陈锐, 周彤, 顾铭企. 某型发动机主燃烧室积炭的排除[J]. 航空发动机, 1996, 22(3): 16-20.
[8] Tomasz M, Soumya G, Kenneth B. Experimental and Modeling Study on the Oxidation of Jet A and the n-Dodecane/Iso-Octane/n-Propylbenzene/1, 3, 5 -Trimethylbenzene Surrogate Fuel[J]. Combustion and Flame, 2013, 160(1): 17-30.
[9] Hazlett R N. Thermal Oxidation Stability of Aviation Turbine Fuels[M]. Philadelphia: ASTM Monogragh 1, America Society for Testing and Materials, 1991.
[10] Marteney P J, Spadaccini L J. Thermal Decomposition of Aircraft Fuel[J]. Journal of Engineering for Gas Turbine and Power, 1986, 108: 648-653.
[11] Tao Z, Fu Y C, Xu G C, et al. Thermal and Element Analyses for Supercritical RP?3 Surface Coke Deposition under Stable and Vibration Conditions[J]. Energy & Fuels, 2015, 29: 2006-2013.
[12] Spadaccini L J, Sobel D R, Huang H. Deposit Formation and Mitigation in Aircraft Fuels[J]. Journal of Engineering for Gas Turbines and Power, 2001, 123(4): 741-746.
[13] Liu Z H, Pan H, Feng S, et al. Dynamic Behaviors of Coking Process During Pyrolysis of China Aviation Kerosene RP-3[J]. Applied Thermal Engineering, 2015, 91:408-416.
[14] Chin J S, Lefebvre A H. Influence of Flow Conditions on Deposits from Heated Hydrocarbon Fuels[R]. ASME 92-GT-l14.
[15] Pei X Y, Hou L Y, Ren Z Y. Flow Pattern Effects on the Oxidation Deposition Rate of Aviation Kerosene[J]. Energy & Fuels, 2015, 29: 6088-6094.
[16] 张弛, 田兴鹏, 林宇震, 等. 旋流杯文氏管长度对积碳的影响研究[J]. 推进技术, 2015, 36(12): 1833-1838. (ZHANG Chi, TIAN Xing-peng, LIN Yu-zhen, et al. Effects of Venturi Length of Swirl Cup on Carbon Deposition[J]. Journal of Propulsion Technology, 2015, 36(12): 1833-1838.)
[17] 袁立公, 邓宏武, 徐国强, 等. 超临界压力下航空煤油RP-3壁面结焦特性对换热的影响[J]. 航空动力学报, 2013, 28(4): 832-837.
[18] 刘玉英, 李娜娜, 黄望全. 燃烧过程中碳烟辐射特性预测方法评述[J]. 推进技术, 2016, 37(3): 479-487. (LIU Yu-ying, LI Na-na, HUANG Wang-quan.Review on Soot Radiation Property Estimation of Combustion Process[J]. Journal of Propulsion Technology, 2016, 37(3): 479-487.)
[19] 王英杰, 徐国强, 邓宏武, 等. 进口温度影响航空煤油结焦特性实验[J]. 航空动力学报, 2009, 24(9):1972-1976.
[20] Pei X Y, Hou L Y. Effect of Dissolved Oxygen Concentration on Coke Deposition of Kerosene[J]. Fuel Processing Technology, 2016, 142: 86-91.
[21] Roan M A, Boehman A L. The Effect of Fuel Composition and Dissolved Oxygen on Deposit Formation from Potential JP-900 Basestocks[J]. Energy & Fuels, 2004, 18: 835-843.
[22] Pei X Y, Hou L Y. Secondary Flow and Oxidation Deposition of Aviation Fuel[J]. Fuel, 2016, 167: 68-74.
[23] 黄艳斐, 朱岳麟, 熊常健, 等. 航空发动机喷嘴结焦积炭的性质[J]. 北京航空航天大学学报, 2011, 37(6): 754-756.
[24] 贾春燕, 王洪铭. 航空发动机燃烧室喷嘴内部燃油结焦研究[J]. 航空发动机, 2011, 37(5): 41-44.
[25] Edwards T, Zabarnick S. Supercritical Fuel Deposition Mechanisms[J]. Industrial & Engineering Chemistry Research, 1993, 32: 3117-3122.
[26] Yang X Y, Wang X, Zhao B W, et al. Simulation Model of Pyrolysis Biofuel Yield Based on Algal Components and Pyrolysis Kinetics[J]. BioEnergy Research, 2014, 7: 1293-1304.
[27] Tang X H, Zhang C, Li Z Y, et al. Element and Chemical Compounds Transfer in Bio-Crude from Hydrothermal Liquefaction of Microalgae[J]. Bioresource Technology, 2016, 202: 8-14.
[28] Yang X Y, Guo F, Xue S, et al. Carbon Distribution of Algae-Based Alternative Aviation Fuel Obtained by Different Pathways[J]. Renewable and Sustainable Energy Reviews, 2016, 54: 1129-1147.
[29] Chin J S, Lefebvre, Sun F T-Y. Temperature Effects on Fuel Thermal Stability[J]. ASME 91-GT-97.(编辑:梅瑛)　　　　　　　　　　　　　*　收稿日期:2016-11-13；修订日期:2017-05-10。作者简介:韩伟东,男,硕士生,研究领域为燃烧,航空发动机喷嘴技术。E-mail: hanweidong1991@126.com通讯作者:甘志文,男,博士,副教授,研究领域为燃料燃烧、航空发动机燃烧室。E-mail: 09651@buaa.edu.cn