激波风洞流场建立过程对进气道流动的影响

推进技术 ›› 2018, Vol. 39 ›› Issue (3): 676-684.

激波风洞流场建立过程对进气道流动的影响

李祝飞,杨基明

中国科学技术大学近代力学系，安徽合肥 230027,中国科学技术大学近代力学系，安徽合肥 230027

发布日期:2021-08-15
作者简介:李祝飞，男，博士，副研究员，研究领域为高超声速进气道。
基金资助:
国家自然科学基金(11402263)。

Effects of Flow Field Establishment Process of Shock Tunnel on Inlet Flow

Department of Modern Mechanics，University of Science and Technology of China，Hefei 230027，China and Department of Modern Mechanics，University of Science and Technology of China，Hefei 230027，China

Published:2021-08-15

摘要/Abstract

摘要： 由于激波风洞喷管起动与进气道起动相“耦合”的流动过程复杂，喷管起动过程中的波系结构对进气道脉冲起动过程的影响规律难以准确把握。本文从简化问题的研究思路出发，将激波风洞喷管流动与进气道流动进行一定程度的“解耦”，以揭示喷管起动波系各组成部分对进气道脉冲起动过程的影响机制。“解耦”方法先采用准一维变截面非定常流动模拟激波风洞喷管的起动过程；然后，将喷管出口参数作为来流条件，对二元进气道的脉冲起动过程进行非定常粘性数值模拟。采用“解耦”方法考察了初始压强对喷管起动波系以及进气道脉冲起动的影响，并与不考虑喷管起动过程，在进气道入口设置初始间断面的模拟方法进行了比较。结果表明，喷管起动波系中的非定常膨胀波和二次激波是影响进气道脉冲起动的主要因素。在初始压强较低时，采用在进气道入口设置初始间断面的方法，可以快速评估进气道的脉冲起动能力；而当初始压强较高时，采用本文的“解耦”方法模拟，能够得到更为可靠的脉冲起动能力。

关键词: 高超声速进气道；脉冲起动；激波风洞；喷管起动；初始间断面

Abstract: Due to the complexity of the coupling process of a nozzle starting flow of a shock tunnel and an inlet starting flow， the effects of the starting shock system of the nozzle on the pulse-starting of the inlet have not been well investigated. To simplify the problem and reveal the mechanism of the inlet pulse-starting in a shock tunnel， the nozzle starting flow of the tunnel was decoupled from the inlet starting process to some extent. At first， the decoupling method adopts a quasi-one-dimensional unsteady flow solver of variable section duct to solve the nozzle starting process of a shock tunnel. And then， an unsteady viscous simulation is performed by setting the flow parameters at the nozzle exit as the inflow conditions of a two-dimensional inlet. The effects of the initial pressure on the nozzle starting process and the pulse-starting of the inlet were investigated by applying the decoupling method， and compared with that obtained by a method of setting an initial discontinuity at the inlet entrance without regard for?the nozzle starting process. The results indicate that the unsteady expansion waves and the secondary shock in nozzle starting process dominate the pulse-starting of the inlet. When the initial pressure is relatively low， a fast estimation of the ability to pulse-start can be performed by setting an initial discontinuity at an inlet entrance. However， when the initial pressure is relatively high， more reliable results of the pulse-starting ability of an inlet can be obtained by applying the decoupling method in the present paper.

Key words: Hypersonic inlet；Pulse-starting；Shock tunnel；Nozzle starting；Initial discontinuity

李祝飞,杨基明. 激波风洞流场建立过程对进气道流动的影响[J]. 推进技术, 2018, 39(3): 676-684.

LI Zhu-fei,YANG Ji-ming. Effects of Flow Field Establishment Process of Shock Tunnel on Inlet Flow[J]. Journal of Propulsion Technology, 2018, 39(3): 676-684.

参考文献

[1] Van Wie D M, Kwok F T, Walsh R F. Starting Characteristics of Supersonic Inlets[R]. AIAA 96-2914.
[2] Rodi P E, Emami S, Trexler C A. Unsteady Pressure Behavior in a Ramjet/Scramjet Inlet[J]. Journal of Propulsion and Power, 1996, 12(3): 486-493.
[3] 潘瑾, 张堃元. 移动唇口变收缩比侧压式进气道反压特性和自起动性能[J]. 航空动力学报, 2009, 24(1): 104-109.
[4] Williams R L. Application of Pulse Facilities to Inlet Testing [J]. Journal of Aircraft, 1964, 1(5): 236-241.
[5] 李祝飞, 高文智, 李鹏, 等. 一种进气道自起动特性检测方法[J]. 实验流体力学, 2013, 27(2): 14-19.
[6] Li Z, Huang B, Yang J. A Novel Test of Starting Characteristics of Hypersonic Inlets in Shock Tunnel[R]. AIAA 2011-2308.
[7] McGregor R J, M?lder S, Paisley T W. Hypersonic Inlet Flow Starting in the Ryerson/University of Toronto Gun Tunnel [R]. Investigations in the Fluid Dynamics of Scramjet Inlets 4.1-4.50, 1992.
[8] 范晓樯, 贾地, 冯定华, 等. 脉冲风洞中进气道起动过程试验研究[J]. 推进技术, 2007, 28(1): 60-64. (FAN Xiao-qiang, JIA Di, FENG Ding-hua, et al.Experimental Investigation on Starting Process of Hypersonic Inlet in Gun Tunnel[J]. Journal of Propulsion Technology, 2007, 28(1): 60-64.)
[9] 李祝飞. 高超声速进气道起动特性机理研究[D]. 合肥:中国科学技术大学, 2013.
[10] Atkins H L. Numerical and Analytical Study of the Inlet Startup Process in a Shock Tunnel Environment[R]. AIAA 88-601.
[11] 范晓樯. 高超声速进气道的设计、计算与实验研究[D]. 长沙:国防科学技术大学, 2006.
[12] 蔡佳, 苏纬仪, 张堃元, 等. 高超声速二元进气道脉冲起动双波结构的理论与数值研究[J]. 推进技术, 2013, 34(9): 1165-1171. (CAI Jia, SU Wei-yi, ZHANG Kun-yun, et al. Theoretical and Numerical Study of Double Shock Structure During 2D Hypersonic Inlet Pulse-Starting Process[J]. Journal of Propulsion Technology, 2013, 34(9): 1165-1171.)
[13] Wang W, Guo R. Numerical Study of Unsteady Starting Characteristics of a Hypersonic Inlet[J]. Chinese Journal of Aeronautics, 2013, 26(3): 563-571.
[14] Tahir R B, M?lder S, Timofeev E V. Unsteady Starting of High Mach Number Air Inlets-a CFD Study[R]. AIAA 2003-5191.
[15] 李宇飞, 何国强, 刘佩进. 一种辅助高超音速进气道起动方法研究[J]. 固体火箭技术, 2007, 30(5): 392-395.
[16] Ogawa H, Grainger A L, Boyce R R. Inlet Starting of High-Contraction Axisymmetric Scramjets[J]. Journal of Propulsion and Power, 2010, 26(6): 1247-1258.
[17] 徐骁, 岳连捷, 卢洪波, 等. 高超声速进气道快速破膜开启的流动特性[J]. 航空学报, 2015, 36(6): 1795-1804.
[18] Grainger A L, Boyce R R, Tirtey S C, et al. The Unsteady Flow Physics of Hypersonic Inlet Starting Processes [R]. AIAA 2012-5937.
[19] 陈强. 激波管流动的理论和实验技术[M]. 合肥:中国科学技术大学, 1975.
[20] Smith C E. The Starting Process in a Hypersonic Nozzle[J]. Journal of Fluid Mechanics, 1966, 24(4): 625-640.
[21] 刘坤伟, 朱雨建, 杨基明, 等. 两种燃烧加热风洞参数匹配方案的比较[J]. 推进技术, 2017, 38(6). (LIU Kun-wei, ZHU Yu-jian, YANG Ji-ming, et al. Comparison of Two Typical Flow-Parameter-Matching Schemes in a Combustion Wind Tunnel[J]. Journal of Propulsion Technology, 2017, 38(6).)
[22] 李祝飞, 高文智, 李鹏, 等. 二元高超声速进气道激波振荡特性实验[J]. 推进技术, 2012, 33(5): 676-682. (LI Zhu-fei, GAO Wen-zhi, LI Peng, et al. Experimental Investigation on the Shock Wave Oscillation Behaviors in a Two-Dimensional Hypersonic Inlet Flow[J]. Journal of Propulsion Technology, 2012, 33(5): 676-682.)
[23] Li Zhufei, Gao Wenzhi, Jiang Hongliang, et al. Unsteady Behaviors of a Hypersonic Inlet Caused by Throttling in Shock Tunnel[J]. AIAA Journal, 2013, 51(10): 2485-2492.
[24] 李祝飞, 杨基明. 预设堵块法检测进气道自起动能力的数值研究[J]. 推进技术, 2016, 37(10): 1810-1818. (LI Zhu-fei, YANG Ji-ming. A Numerical Investigation of Pre-Setting-Blockage Method to Detect Self-Starting Ability of an Inlet[J]. Journal of Propulsion Technology, 2016, 37(10): 1810-1818.)
[25] 童秉纲, 孔祥言, 邓国华. 气体动力学[M]. 北京:高等教育出版社, 2011.　　　　　　　　　　　　　*　收稿日期:2016-10-08；修订日期:2016-11-16。基金项目:国家自然科学基金(11402263)。作者简介:李祝飞,男,博士,副研究员,研究领域为高超声速进气道。 E-mail: lizhufei@mail.ustc.edu.cn(编辑:史亚红)