圆弧端齿结构设计和加工工艺研究进展与展望 *

推进技术 ›› 2018, Vol. 39 ›› Issue (4): 721-730.

• 综述 • 下一篇

圆弧端齿结构设计和加工工艺研究进展与展望 *

刘恒^1,2,洪杰¹,邵伏永²,马同玲²,李垒栋²

北京航空航天大学能源与动力工程学院，北京 100191; 北京动力机械研究所，北京 100074,北京航空航天大学能源与动力工程学院，北京 100191,北京动力机械研究所，北京 100074,北京动力机械研究所，北京 100074,北京动力机械研究所，北京 100074

发布日期:2021-08-15
作者简介:刘恒，男，博士生，工程师，研究领域为转子动力学。

Progress and Prospect of Structural Design and Processing Technology of CURVIC Coupling

School of Energy and Power Engineering，Beihang University，Beijing 100191，China;Beijing Power Machinery Institute，Beijing 100074，China,School of Energy and Power Engineering，Beihang University，Beijing 100191，China,Beijing Power Machinery Institute，Beijing 100074，China,Beijing Power Machinery Institute，Beijing 100074，China and Beijing Power Machinery Institute，Beijing 100074，China

Published:2021-08-15

摘要/Abstract

摘要： 圆弧端齿广泛应用于航空发动机轴系连接，研究其结构设计方法和加工工艺对分析航空发动机转子动力学特性具有重要意义。首先，分析了圆弧端齿结构设计理论，建立了圆弧端齿基本结构参数表述图表，对比了参数化设计方法的异同。其次，介绍了齿面应力仿真分析和试验验证情况，列举了新型结构设计实例，揭示了结构设计技术存在的问题并提出了解决途径。然后，采用弹性平均法解释了圆弧端齿的定心原理，介绍了定心精度分析、装配累积误差分析研究现状和应用情况。最后，评述了圆弧端齿加工工艺方法、加工设备、检测设备、检测方法，指出了当前存在的问题和可能的研究方向。研究结果表明:针对转子设计需求，应系统考虑圆弧端齿结构对转子动力学特性的影响；如果能够解决铣加工精度问题，采用通用设备加工圆弧端齿更具有成本优势；针对精细化检测的迫切需求，需要加快对新型检测方法的研究和探索。

关键词: 圆弧端齿；结构设计；加工工艺；综述

Abstract: The CURVIC coupling is widely used in the connection of aeroengine shafts. It is of great significance to study its structural design method and machining process for the analysis of aeroengine rotor dynamic characteristics. Firstly，the design theory of CURVIC coupling is analyzed，the basic structural parameters of CURVIC coupling are established，and the similarities and differences of parametric design methods are compared. Secondly，the simulation analysis and test verification of tooth surface stress are introduced，and some new structural design examples are listed. The problems existing in the structural design technology are revealed and the solutions are put forward. Then，the centering principle of CURVIC coupling is explained by means of elastically averaged method. Current situation and application of centering accuracy analysis and assembly accumulative error analysis are introduced. Finally，the processing method，machining equipment，testing equipment and detection method of CURVIC coupling are reviewed，and the existing problems and possible research directions are pointed out. The results show that the effects of the CURVIC coupling structure on the rotor dynamic characteristics should be taken into account to meet rotor design requirements. If the problem of machining precision could be solved，using general equipment for processing CURVIC coupling has cost advantage. According to the urgent needs of fine detection，research and exploration of novel detection method need to be accelerated.

Key words: CURVIC coupling；Structural design；Machining process；Review

刘恒,洪杰,邵伏永,马同玲,李垒栋. 圆弧端齿结构设计和加工工艺研究进展与展望 *[J]. 推进技术, 2018, 39(4): 721-730.

LIU Heng^1,2,HONG Jie¹,SHAO Fu-yong²,MA Tong-ling²,LI Lei-dong². Progress and Prospect of Structural Design and Processing Technology of CURVIC Coupling[J]. Journal of Propulsion Technology, 2018, 39(4): 721-730.

参考文献

[1] 林左鸣. 战斗机发动机的研制现状和发展趋势[J]. 航空发动机, 2006, 32(1): 1-8.
[2] 刘大响, 程荣辉. 世界航空动力技术的现状及发展动向[J]. 北京航空航天大学学报, 2002, 28(5): 490-496.
[3] 陈光, 洪杰, 马艳红. 航空燃气涡轮发动机结构[M]. 北京:北京航空航天大学出版社, 2010.
[4] 姚星宇, 王建军. 航空发动机螺栓连接载荷与结构参数对连接刚度影响规律[J]. 推进技术, 2017, 38(2):424-433. (YAO Xing-yu, WANG Jian-jun. Effects of Load and Structure Parameters of Aero-Engine[J]. Journal of Propulsion Technology, 2017, 38(2): 424-433.)
[5] Wildhaber E. Face Clutch[P]. US: 2429284, 1942-02-23.
[6] 林磊, 马健, 邱嘉宁, 等. 航空用圆弧端齿工程设计初步研究[J]. 燃气涡轮试验与研究, 2015, 28(4): 41-44.
[7] Oberg E, Jones F D, Horton H L, et al. Machinery's Handbook Guide 28th Edition[M]. New York: Industrial Press, 2008.
[8] Jiang X, Zhu Y, Hong J. Development and Validation of Analytical Model for Stiffness Analysis of Curvic Coupling in Tightening[J]. Journal of Aerospace Engineering, 2014, 27(4): 1-14.
[9] 刘克俊. 弧齿离合器的设计与计算[J]. 机械设计, 1985, (3): 41-53.
[10] Wildhaber E. Face Clutch[P]. US: 2384582, 1942-05-22.
[11] 黄发. 圆弧端齿结构设计方法研究[D]. 南京:南京航空航天大学, 2013.
[12] Gleason Works. Curvic Coupling Design[M]. New York: Rochester, 1973.
[13] Gleason Works Corporation. Curvic Coupling Dimension Sheet Explanations[R]. New York: Rochester, 1973.
[14] Gleason Works Corporation. Curvic Coupling Design[J]. Gear Technology, 1986, (6): 34-48.
[15] 中国航空动力机械研究所, 中国航空综合技术研究所. HB 7808-2006圆弧端齿[S]. 北京:中国航空综合技术研究所, 2006.
[16] 中国航空动力机械研究所, 南方航空动力机械公司, 中国航空综合技术研究所. HB 20046-2011圆弧端齿检验[S]. 北京:中国航空综合技术研究所, 2011.
[17] Wildhaber E. Face Clutch[P]. US: 2384583, 1942-11-07.
[18] 吴鸿雁, 李剑锋, 王青云, 等. 端面弧齿齿盘的齿面方程及齿面磨削加工仿真[J]. 机械传动, 2007, 31(3): 75-78.
[19] Mueller H, Wiener D, Dutschk R. A Modular Approach to Computing Spiral Bevel Gears and Curvic Couplings[J]. Gear Technology, 2000, 17(3): 32-34.
[20] Tsai Y C, Hsu W Y. A Study on the CAD/CAD of Curvic Couplings[C]. Amsterdam: Proceedings of ASME Turbo Exposition, 2002: 1-6.
[21] Demin A I. Calculation and Design of Curvic Couplings[J]. Machines & Tooling, 1978, 49(1): 27-30.
[22] Pisani S R, Rencis J J. Investigating CURVIC Coupling Behavior by Utilizing Two-and Three-Dimensional Boundary and Finite Element Methods[J]. Engineering Analysis with Boundary Elements, 2000, 24(3): 271-275.
[23] Richardson I J, Hyde T M, Becker A A, et al. A Three-Dimensional Finite Element Investigation of the Bolt Stresses in an Aero-Engine Curvic Coupling under a Blade Release Condition[J]. Journal of Aerospace Engineering, 2000, 214(4): 231-245.
[24] Richardson I J, Hyde T H, Becker A A, et al. A Validation of the Three-Dimensional Finite Element Contact Method for Use with Curvic Couplings[J]. Journal of Aerospace Engineering, 2002, 216(2): 63-75.
[25] Bannister R H. Methods for Modelling Flanged and Curvic Couplings for Dynamic Analysis of Complex Rotor Constructions[J]. ASME Transactions Journal of Mechanical Design, 1980, 102(1): 130-139.
[26] Yuan S, Zhang Y, Zhang Y, et al. Stress Distribution and Contact Status Analysis of a Bolted Rotor with Curvic Couplings[J]. Journal of Mechanical Engineering Science, 2010, 224(9): 1815-1829.
[27] Yuan S, Zhang Y, Zhu Y. Influence of Thin-Wall Structure on Stress Distribution of Curvic Couplings[J]. Journal of Theoretical & Applied Mechanics, 2015, 45(3): 37-52.
[28] 李业明. 大功率机车弹性联轴器及圆弧端齿联结技术研究[D]. 成都:西南交通大学, 2009.
[29] 李浦, 袁奇, 高进, 等. 周向拉杆转子轮盘端面齿接触应力分析[J]. 热力透平, 2013, 42(1): 25-29.
[30] 李辉光, 刘恒, 虞烈. 粗糙机械结合面的接触刚度研究[J]. 西安交通大学学报, 2011, 45(6): 69-74.
[31] Muju S, Sandoval R S. Curvic Coupling Fatigue Life Enhancement through Unique Compound Root Fillet Design[P]. US: 6672966 B2, 2004-06-06.
[32] Dornfeld M S, Roever D M, Potter M, et al. Face Coupling[P]. US: 8465373 B2, 2013-06-18.
[33] 李爱民, 崔海涛, 温卫东, 等. 航空圆弧端齿的齿根双圆弧结构设计及优化[J]. 推进技术, 2016, 37(1): 146-155. (LI Ai-min, CUI Hai-tao, WEN Wei-dong, et al. Design and Optimization of Curvic Coupling with Double Circular-Arc Root Fillet in Aero-Engine[J]. Journal of Propulsion Technology, 2016, 37(1): 146-155.)
[34] 陈龙, 蔡显新. 一种圆弧端齿轮[P]. 中国专利:CN201651231U, 2010-11-24.
[35] 陈龙, 石林, 王宇星, 等. 圆弧端齿联轴器[P]. 中国专利:CN202220805U, 2012-05-16.
[36] Slocum A H. Precision Machine Design[M]. Englewood Cliffs: Prentice-Hall, 1992.
[37] Slocum A H. Kinematic Couplings: A Review of Design Principles and Applications[J]. International Journal of Machine Tools & Manufacture, 2010, 50(4): 310-327.
[38] 陈晓娟, 吴文凯, 傅学农, 等. 精确约束支承结构在惯性约束聚变装置中的应用与研究[J]. 机械科学与技术, 2009, 28(8): 1111-1120.
[39] De Vicq A N. Precision Engineering: An Evolutionary view[J]. Precision Engineering, 1990, 12(3): 180-181.
[40] Willoughby P. Elastically Averaged Precision Alignment[D]. Cambridge: Massachusetts Institute of Technology, 2005.
[41] Slocum A H, Chiu M A, Hobbs E D, et al. Kinematic and Elastically Averaged Joints Connecting the Past, Present and Future[C]. Japan: International Symposium on Ultraprecision Engineering and Nanotechnology, 2013: 1-4.
[42] Willoughby P J, Slocum A H. Precision Connector Assembly Using Elastic Averaging[C]. Orlando: ASPE Annual Conference, 2004.
[43] Rowe K G, Dickrell D J, Sawyer W G. Interrupted Measurement Repositioning Using Elastic Averaging[J]. Tribology Letters, 2015, 59(1): 1-3.
[44] Slocum A H, Weber A C. Precision Passive Mechanical Alignment of Wafers[J]. Journal of Microeletromechanical Systems, 2003, 12(6): 826-833.
[45] Kiester T A, Morris S E, West K L, et al. Elastically Averaged Alignment Systems and Methods[P]. US: 9238488 B2, 2016-01-19.
[46] Smith M A, Zhao X, Daul R C, et al. Using Elastic Averaging for Alignment of Battery Stack, Fuel Cell Stack, or Other Vehicle Assembly[P]. US: 20120115010 A1, 2012-05-10.
[47] Colombo J. Elastically Averaged Alignment Systems and Methods[P]. US: 20150016918 A1, 2015-01-15.
[48] Morris S E, Lawall J P. Elastically Averaged Alignment Systems and Methods Thereof[P]. US: 20150166124 A1, 2015-06-18.
[49] Colombo J, Morris S E, Lawall J P, et al. Elastically Averaged Alignment Systems and Methods[P]. US: 20150232130 A1, 2015-08-20.
[50] Morris S E, Lawall J P. Elastically Averaged Alignment Systems and Methods 2014[P]. US: 20150375798 A1, 2015-12-31.
[51] 杨友东, 谷振华. 基于误差平均效应分度装置的分度精度的研究[J]. 应用科技, 2002, 29(7): 1-3.
[52] Marziale M, Polin W. Review of Variational Models for Tolerance Analysis of an Assembly[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Engineering Manufacture, 2011, 225(3): 305-318.
[53] Davidson J K, Wilcox L E. Minimizing Assembly Runout in Turbo-Machines Made with Curvic Couplings[J].Journal of Engineering for Power, 1976, (1): 37-46.
[54] Wildhaber E. Method for Grinding Toothed Faced Members[P]. US: 2401446, 1946-06-04.
[55] Wildhaber E. Method of Producing Faced Clutches[P]. US: 2443089, 1943-01-04.
[56] Lanes G, Nelson M. Curvic Wheel Dressing[P]. US: 2010/0236537 A1, 2010-09-23.
[57] Brugess G M. Method and Apparatus for Machining a Coupling[P]. US: 7052379, 2006-05-30.
[58] Lanes G, Nelson M. Curvic Wheel Dressing[P]. US: 8465344 B2, 2013-06-18.
[59] Dornfeld M S, Roever D M, Potter M, et al. Face Coupling[P]. US: 20110158744 A1, 2009-12-29.
[60] Brugess G. Method and Apparatus for Machining a Coupling[P]. US: 20070049182 A1, 2006-04-05.
[61] 于启军, 肖雷. 圆弧端齿的加工[J]. 工艺与检测, 2014, (5): 114-116.
[62] 刘青海. 圆弧端齿的加工[J]. 机械制造, 1990, (12): 12-14.
[63] 吴序堂, 王小椿. 格里森弧齿离合器的设计及加工原理[J]. 齿轮, 1987, 11(5): 33-37.
[64] 蔺志强, 张森堂, 吴志新, 等. 圆弧端齿数控加工技术研究[J]. 科技纵横, 2009, (12): 184-186.
[65] 顾天胜. 关于圆弧端齿数控加工技术的分析[J]. 新技术新工艺, 2011, (11): 46-48.
[66] 刘振宇. 计算机图形图像技术在航空弧齿锥齿轮检测中的应用研究[D]. 西安:西北工业大学, 2004.
[67] Orchard N B. Inspection of Curvic Couplings using a CMM[C]. Lamdamap: Proceeding of the 6th International Conference and Exhibition on Laser Metrology and Machine Performance, 2003: 221-230.
[68] 徐连军. 圆弧端齿测量方法研究[J]. 中国新技术新产品, 2011, (9): 132-132.
[69] 胡荣辉, 王玉, 王东, 等. 圆弧端齿检测技术研究[J]. 航空精密制造技术, 2013, 49(5): 54-56.
[70] Nielson B J. Digital Inspection of Fixed CURVIC Coupling Contact Pattern[D]. San Luis Obispo: California Polytechnic State University, 2012. (编辑:梅瑛)　　　　　　　　　　　　　*　收稿日期:2017-09-13；修订日期:2017-11-10。作者简介:刘恒,男,博士生,工程师,研究领域为转子动力学。E-mail: h-liu@foxmail.com

圆弧端齿结构设计和加工工艺研究进展与展望 *

Progress and Prospect of Structural Design and Processing Technology of CURVIC Coupling

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价