基于二次流喷射的并联式TBCC排气系统性能提升技术研究 *

推进技术 ›› 2018, Vol. 39 ›› Issue (4): 760-767.

基于二次流喷射的并联式TBCC排气系统性能提升技术研究 *

王占学^1,2,祁少波¹,周莉¹,史经纬¹

西北工业大学动力与能源学院，陕西西安 710129; 中国空气动力研究与发展中心超高速空气动力研究所高超声速冲压发动机技术重点实验室，四川绵阳 621000,西北工业大学动力与能源学院，陕西西安 710129,西北工业大学动力与能源学院，陕西西安 710129,西北工业大学动力与能源学院，陕西西安 710129

发布日期:2021-08-15
作者简介:王占学，男，博士，研究领域为航空发动机气动热力学及新概念喷气推进技术。
基金资助:
国家自然科学基金(51576163；51236006)。

Performance Improvement Study of Over-Under TBCC Exhaust System by Secondary Flow Injection

School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China;Science and Technology on Scramjet Laboratory，Hypervelocity Aerodynamics Institute of CARDC， Mianyang 621000，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China,School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China and School of Power and Energy，Northwestern Polytechnical University，Xi’an 710129，China

Published:2021-08-15

摘要/Abstract

摘要： 基于CFD数值模拟方法，分析了并联式涡轮基组合循环发动机(Turbine Based Combined Cycle，TBCC)排气系统的内外流场特性，提出了在涡轮喷管下壁面处喷入高压二次流以提升排气系统性能的方式，研究了不同飞行状态下二次流喷射对排气系统性能(推力系数、推力矢量角)的影响规律。计算结果表明:二次流喷射会产生弓形激波，与喷管上膨胀壁面附面层作用产生新的分离区，提升涡轮喷管和冲压喷管内的整体压力，从而改善并联式TBCC排气系统的推力及推力矢量性能，且对亚声速和跨声速飞行状态下的并联式TBCC排气系统性能改善比较明显，可使轴向推力系数最大提升7.34%，推力矢量角提升12.76°。

关键词: 涡轮基组合循环发动机；排气系统；二次流喷射；推力系数；推力矢量角

Abstract: Base on CFD， the flow characteristics of over-under TBCC (Turbine Based Combined Cycle， TBCC) exhaust system was analyzed. A method to enhance the exhaust system performance by injecting high pressure secondary flow into the down wall of turbo-engine nozzle was proposed. And the effects of secondary injection on the performance， e.g， thrust coefficient and thrust vector angle were investigated in different flight Mach number. Results show that secondary injection produces bow shock， which can generate new flow separation region interaction with ramp of nozzle. Bow shock improve turbo-engine nozzle and ramjet nozzle pressure distributions， thus improve nozzle thrust and thrust vector performance， and obviously improve over-under TBCC nozzle performance at subsonic and transonic condition， which makes the axial thrust coefficient increase by 7.34% and thrust vector angle increase by 12.76°.

Key words: TBCC；Exhaust system；Secondary injection；Thrust coefficient；Thrust vector angle

王占学,祁少波,周莉,史经纬. 基于二次流喷射的并联式TBCC排气系统性能提升技术研究 *[J]. 推进技术, 2018, 39(4): 760-767.

WANG Zhan-xue^1,2,QI Shao-bo¹,ZHOU Li¹,SHI Jing-wei¹. Performance Improvement Study of Over-Under TBCC Exhaust System by Secondary Flow Injection[J]. Journal of Propulsion Technology, 2018, 39(4): 760-767.

参考文献

[1] Watanabe Y, Miyagi H, Sekido H, et al. Conceptual Design Study on Combined-Cycle Engine for Hypersonic Transport[R]. ISABE 93-7018.
[2] Snyder C, Maldonado J. The Design and Performance Estimates for the Propulsion Module for the Booster of a TSTO Vehicle[R]. AIAA 91-3136.
[3] Hendrink P, Saint-Mard M. ACES Snger-Type T.S.T.O.Family with Common First Stage[R]. AIAA 98-3229.
[4] Sebastien Defoort, Marc Ferrier. LAPCAT-II: Conceptual Design of a Mach 8 TBCC Civil Aircraft, Enforced by Full Navier-Stokes 3D Nose-to-Tail Computation[R]. AIAA 2011-2317.
[5] Miyagi H, Miyagawa H. Combined Cycle Engine Research in Japanese HYPR Project[R]. AIAA 95-2751.
[6] Grarnland T, Berens T. NozzIe/Afterbody Integration for Hypersonic Vehicles by Means of Secondary Air Injection[R]. AIAA 95-6050.
[7] Edwards C L Q, Small W J, Widner J P, et al. Studies of Scramjet/Airframe Integration Techniques for Hypersonic Aircraft[R]. AIAA 75-58.
[8] Karen A D, Scott C A. An Experimental and Computational Investigation of a Translating Throat Single Expansion-Ramp Nozzle[R]. AIAA 96-2540.
[9] 张少丽, 单勇, 张勇, 等. 膨胀边开槽对单边膨胀喷管性能影响的数值研究[J]. 推进技术, 2012, 33(3). (ZHANG Shao-li, SHAN Yong, ZHANG Yong, et al. Numerical Studies on the Performances of the Single Expansion Ramp Nozzle with Slots on the Ramp[J]. Journal of Propulsion Technology, 2012, 33(3).)
[10] Yungster S, Trefny C J. Computational Study of Single-Expansion-Ramp Nozzles with External Burning[R]. AIAA 94-0024.
[11] Gamble Eric J, Haid Dan. Improving off-Design Nozzle Performance Using Fluidic Injection[R]. AIAA 2004-1206.
[12] 刘爱华. 单膨胀斜面喷管型面设计及其流动控制研究[D]. 西安:西北工业大学, 2007.
[13] 孙得川. 二次射流干扰流场及其控制参数研究[D]. 西安:西北工业大学, 2000.
[14] Robert M Plencner. Overview of the Beta II Two- Stage-to-Orbit Vehicle Design[R]. AIAA 91-3175.
[15] Davic J, Midea A. Propulsion and Aerodynamic Analysis of the Beta II Two-Stage-to-Orbit Vehicle[R]. AIAA 92-4245.
[16] Burkardt L, Norris R. The Design and Evolution of the Beta Two-Stage-to-Orbit Horizontal Takeoff and Landing Launch System[R]. AIAA 92-5080.
[17] 莫建伟. TBCC排气系统设计方法及流场特性研究 [D]. 南京:南京航空航天大学, 2015.
[18] 李念, 张堃元, 徐惊雷, 等. 二维非对称喷管数值模拟与验证[J]. 航空动力学报, 2004, 19(6).(编辑:张荣莉)　　　　　　　　　　　　　*　收稿日期:2016-12-20；修订日期:2017-03-01。基金项目:国家自然科学基金(51576163；51236006)。作者简介:王占学,男,博士,研究领域为航空发动机气动热力学及新概念喷气推进技术。E-mail: wangzx@nwpu.edu.cn