基于等效等时应力应变曲线的金属材料多工况蠕变分析

推进技术 ›› 2018, Vol. 39 ›› Issue (5): 1105-1110.

基于等效等时应力应变曲线的金属材料多工况蠕变分析

胡锦文¹,成晓鸣²,董斌¹,于明²

武汉第二船舶设计研究所，湖北武汉 430072,中国航发湖南动力机械研究所，湖南洙洲 412000,武汉第二船舶设计研究所，湖北武汉 430072,中国航发湖南动力机械研究所，湖南洙洲 412000

发布日期:2021-08-15
作者简介:胡锦文，男，博士生，工程师，研究领域为结构强度与可靠性。

Creep Analysis of Metal Materials under Multiple Loading Cases Based on Equivalent Isochronous Stress-Strain Curve

Wuhan Second Ship Design and Research Institute，Wuhan 430072，China,AECC Hunan Aviation Powerplant Research Institute，Zhuzhou 412000，China,Wuhan Second Ship Design and Research Institute，Wuhan 430072，China and AECC Hunan Aviation Powerplant Research Institute，Zhuzhou 412000，China

Published:2021-08-15

摘要/Abstract

摘要： 为了在工程设计阶段评估涡轮叶片在多工况下的蠕变变形，基于单工况的等时应力应变曲线，提出了一种等效等时应力应变曲线的方法，并与发动机持久试车实例进行了分析比较。结果表明:基于等效等时应力应变曲线方法所计算的涡轮叶片卸载后的残余变形与发动机持久试车结果的相对误差的平均值为15.30%，而通常所采用的基于二维梁理论和基于时间步的三维有限元分析方法所计算的相对误差的平均值分别为45.35%，31.14%，表明该种方法具有较好的工程应用性。

关键词: 航空发动机；涡轮叶片；蠕变；损伤；等时应力应变曲线

Abstract: In order to evaluate the creep deformation of turbine blade under multiple loading cases in the engineering design stage， a method of equivalent isochronous stress-strain curve based on the isochronous stress-strain curve corresponding to the single loading case was proposed. The method was carried out and tested by an aeroengine’s long-term trial. The results show that， the average relative error of the residual radial deformation of turbine blade computed by the proposed method is 15.30% with that of the aeroengine’s long-term trial， but for the two other commonly used methods， one is the two-dimensional analysis method based on the beam theory and the other is the three-dimensional FE analysis method based on the time step， the corresponding comparison results are 45.35% and 31.14%， respectively， which indicates the good application of the proposed method.

Key words: Aeroengine；Turbine blade；Creep；Damage；Isochronous stress-strain curve

胡锦文,成晓鸣,董斌,于明. 基于等效等时应力应变曲线的金属材料多工况蠕变分析[J]. 推进技术, 2018, 39(5): 1105-1110.

HU Jin-wen¹,CHENG Xiao-ming²,DONG Bin¹,YU Ming². Creep Analysis of Metal Materials under Multiple Loading Cases Based on Equivalent Isochronous Stress-Strain Curve[J]. Journal of Propulsion Technology, 2018, 39(5): 1105-1110.

参考文献

[1] 饶寿期. 航空发动机的高温蠕变分析[J]. 航空发动机, 2004, 30(1): 10-13.
[2] 闫晓军, 聂景旭. 定向结晶涡轮叶片蠕变/疲劳寿命的试验与分析[J]. 航空动力学报, 2005, 20(6): 27-33.
[3] WEN Zhixun, Hou Naixian, YUE Zhufeng. Creep Behaviors of Nickel-Based Single Crystal Superalloys Compact Tension Specimen at High Temperature Advanced Materials Research[M]. Switzerland: Trans Tech Publications, 2011: 1678-1683.
[4] 尤英俊, 凌翔, 涂善东. 小冲孔试样高温蠕变损伤的有限元分析[J]. 机械强度, 2004, 26(2): 183-187.
[5] 艾兴, 高行山, 温志勋, 等. DD6镍基单晶合金气膜孔薄壁平板高温蠕变性能[J]. 航空动力学报, 2014, 29(5): 1197-1204.
[6] 李骏, 宋友辉, 刘汉斌, 等. 涡轮叶片-榫头-轮盘的蠕变与低循环疲劳寿命预测[J]. 推进技术, 2015, 36(11): 1699-1704. (LI Jun, SONG You-hui, LIU Han-bin, et al. Creep and Low Cycle Fatigue Life Prediction for Turbine Blade-Tenon-Disk Structure[J]. Journal of Propulsion Technology, 2015, 36(11): 1699-1704.)
[7] Ma C W, Xuan F Z, Wang Z D, et al. Isochronous Stress-Strain Curves of Low Alloy Steel Crosss-Weld-Specimen at High Temperature[J]. Acta Metallurgica Sinica, 2004, 17(4): 612-617.
[8] ASME Section Ⅲ. Rules for Construction of Nuclear Power Plant Components[M]. New York: ASME, 2007.
[9] 彭剑, 周昌玉, 代巧, 等. 工业纯钛中低温蠕变的等时应力应变曲线[J]. 稀有金属材料与工程, 2016, 45(2): 346-352.
[10] 荆建平, 夏松波, 孙毅, 等. 高温蠕变分析的非线性连续损伤力学模型[J]. 推进技术, 2001, 22(2):139-142. (JING Jian-ping, XIA Song-bo, SUN Yi, et al. Nonlinear Continuum Damage Mechanics Model on High Temperature Creep Analysis[J]. Journal of Propulsion Technology, 2001, 22(2): 139-142.)
[11] 马秋林, 张莉, 徐宏, 等. 工业纯钛TA2室温蠕变第1阶段特性研究[J]. 稀有金属材料与工程, 2007, 36(1): 11-14.
[12] 王健, 彭立强. 榫头接触应力计算及涡轮叶片强度分析[C]. 兰州:第五届中国CAE工程分析技术年会, 2009: 201-209.
[13] 葛玉峰. 双工质冷却涡轮叶片温度场计算与强度分析[D]. 大连:大连理工大学, 2009.
[14] LU Yi. Preliminary Design and Life Estimation of the First Stage High Pressure Turbine Rotor Blade of an Industrial Engine[D]. Cranfield: Cranfield University, 2012.
[15] 罗尔斯·罗伊斯公司. EGD-3斯贝MK202发动机应力[M]. 丁爱祥, 吴君, 译. 北京:国际航空编辑部, 1979: 164-212.
[16] Naeem M. Implications of a Military Turbofan’s High-Pressure Turbine Erosion for Blade’s Creep-Life Consumption[J]. Journal of Propulsion and Power, 2010, 26(1): 177-182.
[17] Horlock J H, Torbidoni L. Turbine Blade Cooling: the Blade Temperature Distribution[J]. Journal of Power and Energy, 2006, 22(4): 343-353.
[18] 付娜. 某航空发动机涡轮盘和叶片的强度分析与寿命计算[D]. 西安:西北工业大学, 2006.(编辑:史亚红)　　　　　　　　　　　　　*　收稿日期:2017-05-06；修订日期:2017-07-03。作者简介:胡锦文,男,博士生,工程师,研究领域为结构强度与可靠性。E-mail: 2007.hujinwen@163.com