[1] 黄伟光. 叶轮机械动静叶片排非定常气动干涉的数值模拟[J]. 工程热物理学报, 1999, 20(3): 294-298.
[2] Brachmanski R E, Niehuis R, Bosco A. Investigation of a Separated Boundary Layer and Its Influence on Secondary Flow of a Transonic Turbine Profile[R]. ASME 2014-GT-25890.
[3] Ochs M, Schulz A, Bauer H J. Investigation of the Influence of Trailing Edge Shock Waves on Film Cooling Performance of Gas Turbine Airfoils[R]. ASME 2007-GT-27482.
[4] Adami P, Montomoli F, Belardini E, et al. Interaction Between Wake and Film Cooling Jets: Numerical Analysis[R]. ASME 2004-GT-53178.
[5] Ou S, Han J C, Mehendale A B, et al. Unsteady Wake Over a Linear Turbine Blade Cascade with Air and CO2 Film Injection, Part I: Effect on Heat Transfer Coefficients[J]. Journal of Turbomachinery, 1994, 116(4): 721-729.
[6] Mehendale A B, Han J C, Ou S, et al. Unsteady Wake Over a Linear Turbine Blade Cascade with Air and CO2 Film Injection: Part II—Effect on Film Effectiveness and Heat Transfer Distributions[J]. Journal of Turbomachinery, 1994, 116(4): 730-737.
[7] 李虹杨, 郑赟. 动静干涉对涡轮转子叶片气膜冷却的影响[J]. 北京航空航天大学学报, 2016, 42(1):139-146.
[8] Rigby M J, Johnson A B, Oldfield M L G. Gas Turbine Rotor Blade Film Cooling with and without Simulated NGV Shock Waves and Wakes[R]. ASME 90-GT-78.
[9] 周勇, 赵晓路, 徐建中. 非定常激波对气膜冷却影响的数值模拟[J]. 工程热物理学报, 2007, 28(6): 933-935.
[10] 迟重然. 气冷涡轮叶片的传热设计[D]. 哈尔滨:哈尔滨工业大学, 2010.
[11] Chi Z, Wang S, Ren J, et al. Multi-Dimensional Platform for Cooling Design of Air-Cooled Turbine Blades[R]. ASME 2012-GT-68675.
[12] 罗磊, 王松涛, 迟重然, 等. 传热设计流程在涡轴涡轮冷却中的应用[J]. 推进技术, 2013, 34(11): 1520-1529. (LUO Lei, WANG Song-tao, CHI Zhong-ran, et al. Application of Heat Transfer Design Process for Turbine in Turbo Shaft Engine[J]. Journal of Propulsion Technology, 2013, 34(11): 1520-1529.)
[13] 罗磊, 卢少鹏, 迟重然, 等. 气热耦合条件下涡轮动叶叶型与冷却结构优化[J]. 推进技术, 2014, 35(5): 603-609. (LUO Lei, LU Shao-peng, CHI Zhong-ran, et al. Conjugate Heat Transfer Optimization for Blade Profiles and Cooling Structure in Turbine Rotor[J]. Journal of Propulsion Technology, 2014, 35(5): 603-609.)
[14] 卢少鹏, 迟重然, 罗磊, 等. 气热耦合条件下涡轮静叶三维优化[J]. 推进技术, 2014, 35(3): 356-364. (LU Shao-peng, CHI Zhong-ran, LUO Lei, et al. Conjugate Heat Transfer 3-D Optimization for Turbine Stator[J]. Journal of Propulsion Technology, 2014, 35(3): 356-364.)
[15] Benabed M, Azzi A, Jubran B A. Numerical Investigation of the Influence of Incidence Angle on Asymmetrical Turbine Blade Model Showerhead Film Cooling Effectiveness[J]. Heat and Mass Transfer, 2010, 46(8-9): 811-819.
[16] Murari S, Sathish S, Shraman G, et al. CFD Aerodynamic Performance Validation of a Two-Stage High Pressure Turbine[R]. ASME 2011-GT-45569.
[17] Martelli F, Adami P. Unsteady Aerodynamics and Heat Transfer in Transonic Turbine Stages: Modelling Approaches[C]. Sharm El-Shiekh: 8th International Congress of Fluid Dynamics & Propulsion, 2006: 14-17.
[18] Akin M B, Sanz W. The Influence of Transition on CFD Calculations of a Two-Stage Counter-Rotating Turbine[R]. ASME 2014-GT-26044.
[19] 周莉, 韦威, 蔡元虎. 非定常尾迹输运对动叶气膜冷却流场影响[J]. 航空动力学报, 2012, 27(8): 1696-1703.
[20] Narzary D P, Gao Z, Mhetras S, et al. Effect of Unsteady Wake on Film-Cooling Effectiveness Distribution on a Gas Turbine Blade with Compound Shaped Holes[R]. ASME 2007-GT-27070. * 收稿日期:2017-10-17;修订日期:2017-11-30。基金项目:国家自然科学基金委创新研究群体项目(51421063)。通讯作者:王宇峰,男,博士生,研究领域为叶轮机械气动热力学。E-mail: wangyflp@126.com(编辑:梅瑛)
|