新型热混合效率公式及其在一体化加力燃烧室中的应用 *

推进技术 ›› 2018, Vol. 39 ›› Issue (7): 1515-1522.

新型热混合效率公式及其在一体化加力燃烧室中的应用 *

刘友宏,杜力伟

北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191

发布日期:2021-08-15

ANew Thermal Mixing Efficiency Formulaand Its Applicationin Integrated Afterburner

School of Energy and Power Engineering，Beihang University，Beijing 100191，China and School of Energy and Power Engineering，Beihang University，Beijing 100191，China

Published:2021-08-15

摘要/Abstract

摘要： 为了解决国内外普遍使用的刘 -谢热混合效率公式不能适用于有内热源流场(如加力燃烧)的问题，提出了一种新型的刘 -杜热混合效率公式。该公式能够同时适用于有无内热源工况(如加力和非加力燃烧)下热混合效率的计算分析研究。基于公式推演结果，对新型热混合效率公式的取值极限进行了理论验证。通过同一非加力状态下与刘 -谢热混合效率公式的对比分析，验证了新型热混合效率公式的正确性。接着，利用该公式研究了一体化加力燃烧室加力燃烧工况下波瓣混合器内扩张角对流体掺混过程的影响规律。在混合的后半段区域中，随着波瓣内扩张角增加，同一截面上混合流体对应的刘 -杜热混合效率逐渐上升。在出口截面上，内扩张角 25°模型对应的刘 -杜热混合效率为 0.779，相对于内扩张角 0°模型增加了 10.9%。

关键词: 刘 -杜热混合效率公式；一体化加力燃烧室；加力燃烧；内热源

Abstract: A new Liu-Du thermal mixing efficiency formula was proposed to overcome the shortcoming ofthe widely used Liu-Xie thermal mixing efficiency formula in the case with internal heat source(such as after-burning). The Liu-Du thermal mixing efficiency formula can be used to investigate the mixing process within theintegrated afterburner for both the non-after-burning and after-burning case. Through analyzing the detailedequation，the Liu-Du thermal mixing efficiency formula was validated by the physical theory. Besides，the Liu-Du thermal mixing efficiency formula was compared with the Liu-Xie thermal mixing efficiency formula for thenon-after-burning case. By using the Liu-Du thermal mixing efficiency formula，the influence of lobe inward penetration angle on the mixed flow field was studied. When the lobe inward penetration angle increased，the magnitude of the Liu-Du thermal mixing efficiency is found to be enhanced for the mixed flow field near the outletcross section. In the outlet cross section of the integrated afterburner，Liu-Du thermal mixing efficiency of thecase with a lobe inward penetration angle of 25° has a magnitude of 0.779 and the magnitude has augmented10.9% as compared with the 0° case.

Key words: Liu-Du thermal mixing efficiency formula；Integrated afterburner；After burning；Internal heat source

刘友宏,杜力伟. 新型热混合效率公式及其在一体化加力燃烧室中的应用 *[J]. 推进技术, 2018, 39(7): 1515-1522.

LIU You-hong,DU Li-wei. ANew Thermal Mixing Efficiency Formulaand Its Applicationin Integrated Afterburner[J]. Journal of Propulsion Technology, 2018, 39(7): 1515-1522.

参考文献

[1] Frost T H.Practical Bypass Mixing Systems for Fan JetAero Engines[J].Aeronautical Quarterly,1966,17(2): 141-160.
[2] Xie Y,Liu Y H.A Modified Thermal Mixing Efficiencyand Its Application to Lobed Mixer Nozzle for Aero-En.gines[J].Heat Transfer Research,2011,42(4): 317-335.
[3] Du L,Liu Y,Li T.Numerical Predictions of Scarfing on Performance of S-Shaped Nozzle with Asymmetric Lobe[J].Journal of Propulsion and Power,2014,31(2): 604-618.
[4] 刘友宏,谢翌,郭楠 .尾缘凹扇及综合修形对波瓣混合器性能影响[ J].航空动力学报, 2010,25(2): 243-250.
[5] 刘友宏,张少鹏,杨旭,等 .波瓣尾缘切角对涡扇发动机混合排气系统气动热力性能影响[ J].推进技术, 2013,34(6): 734-740.(LIU You-hong,ZHANG Shao-peng,YANG Xu,et al.Effects of Cut Angles at Trailing Edge of Lobe on Aero -Thermodynamic Perfor.mance of Forced Mixing Exhaust System in Turbofan En.gine[J].Journal of Propulsion Technology,2013,34(6): 734-740.)
[6] 杜力伟,刘友宏,邵万仁,等 .波瓣数对波瓣 S型混合二元喷管气动热力性能影响[ J].航空动力学报, 2015,30(4): 916-926.
[7] 刘友宏,杜力伟,李腾,等 .非对称波瓣下外扩张角对 S型喷管气动热力性能影响[ J].推进技术, 2015,36(5): 678-687.(LIU You-hong,DU Li-wei, LI Teng,et al.Effects of Downward-Outward Penetra.tion Angle of an Asymmetric Lobed Mixer on Aero-Ther.mal Dynamical Performance of an S-Shaped Nozzle[J].Journal of Propulsion Technology,2015,36(5): 678-687.)
[8] 罗虎 .中心锥有无内突扩的波瓣引射器内流场数值模拟研究[ J].应用数学和力学, 2014,35(5): 554-564.
[9] 李锋,郭瑞卿,李龙贤,等 .整流支板和火焰稳定器的一体化设计加力燃烧室性能的数值模拟[ J].航空发动机, 2012,38(5): 6-9.
[10] 樊小倩 .支板凹腔一体化加力燃烧室设计与流场计算[ D].北京:北京航空航天大学, 2013.
[11] 吴迪 .新型一体化加力燃烧室冷态流场试验研究[D].北京:北京航空航天大学, 2008.
[12] Modest M F.Radiative Heat Transfer[M].Salt Lake City: Academic Press,2013.
[13] 谢翌,刘友宏 .瓣高宽比对波瓣强迫混合排气系统性能影响[ J].航空动力学报, 2010,25(12): 2787-2794.
[14] 王海龙 .新型火焰稳定器设计与研究[ D].北京:北京航空航天大学, 2011.
[15] Xie Y,Liu Y.Numerical Investigation of Mixing Lengthon Performance of Lobed Forced Mixer Nozzles[J].Heat Transfer—Asian Research,2011,40(3): 205-216.
[16] Xie Y,Liu Y.Numerical Investigation of Lobe SpacingRatio on Performance of Forced Mixer Nozzle[J].Heat Transfer—Asian Research,2011,40(7): 593-607.* 收稿日期: 2017-05-27；修订日期: 2017-08-26。通讯作者:刘友宏,男,博士,教授,研究领域为传热传质学、热管理、热防护等。 E-mail: liuyh@buaa.edu.cn (编辑:梅瑛)