冷气入射角及射流比对先进驻涡燃烧流动的影响

推进技术 ›› 2018, Vol. 39 ›› Issue (8): 1797-1802.

冷气入射角及射流比对先进驻涡燃烧流动的影响

曾卓雄¹,王志凯²

上海电力学院能源与机械工程学院，上海 200090,中国航发湖南动力机械研究所，湖南株洲 412002

发布日期:2021-08-15
基金资助:
国家自然科学基金(51066006；51266013)；航空科学基金(2013ZB56002；2013ZB56004)。

Effects of Cold Flow Injection Angle and Injection Ratio on Combustion Flow in Advanced Vortex Combustor

College of Power and Mechanical Engineering，Shanghai University of Electric Power，Shanghai?200090，China and AECC Hunan Aviation Powerplant Research Institute，Zhuzhou 412002，China

Published:2021-08-15

摘要/Abstract

摘要： 为了获得带导流片的先进旋涡燃烧室(AVC)壁面气膜冷却效率的变化规律，对不同冷空气入射角度以及射流比下的绝热壁面AVC冷却及掺混燃烧性能进行了数值模拟及分析。结果表明:入射角等于30°时，射流比越大压损越小；入射角等于60°时，压损相差不大；入射角等于90°时，射流比越大压损越大。入射角等于30°时，燃烧效率受射流比的影响较小；入射角等于90°时，燃烧效率随着射流比的增大而增大。射流比等于1.2及1.5时，燃烧效率随入射角的变化幅度较小；射流比等于1.8及2.0时，燃烧效率随入射角的增大而增大。

关键词: 先进旋涡燃烧室；壁面冷却；掺混燃烧

Abstract: In order to obtain wall film cooling efficiency in Advanced Vortex Combustor(AVC) with flow guide vanes， numerical investigation was performed on the cooling and mixing combustion performance in AVC in the condition of different injection angles and injection ratios. The results show that when the injection angle is equal to 30°， the pressure loss decreases with the increase of the injection ratio， but the combustion efficiency is less affected. When the injection angle equals 60°， the pressure loss varies little， but when the injection angle is equal to 90°， the pressure loss and the combustion efficiency both increase. With the increase of the injection angle， when the injection ratio is equal to 1.2 and 1.5， the combustion efficiency varies slightly， but when the injection ratio is equal to 1.8 and 2， the combustion efficiency increases.

Key words: Advanced Vortex Combustor；Wall cooling；Mixing and combustion

曾卓雄,王志凯. 冷气入射角及射流比对先进驻涡燃烧流动的影响[J]. 推进技术, 2018, 39(8): 1797-1802.

ZENG Zhuo-xiong¹,WANG Zhi-kai². Effects of Cold Flow Injection Angle and Injection Ratio on Combustion Flow in Advanced Vortex Combustor[J]. Journal of Propulsion Technology, 2018, 39(8): 1797-1802.

参考文献

[1] 吴泽俊, 何小民, 洪亮, 等. 采用离心喷嘴的单凹腔驻涡燃烧室点火与贫熄特性[J]. 推进技术, 2015, 36(4): 601-607. (WU Ze-jun, HE Xiao-min, HONG Liang, et al. Ignition and Lean Blowout Characteristics of a Single-Cavity Trapped Vortex Combustor Utilizing Pressure Swirl Atomizer[J]. Journal of Propulsion Technology, 2015, 36(4): 601-607.)
[2] Deng Y B, Su F M. Low Emissions Trapped Vortex Combustor[J]. Aircraft Engineering and Aerospace Technology, 2016, 88: 33-41.
[3] Kumar P K E, Mishra D P. Flame Stability Characteristics of Two-Dimensional Trapped Vortex Combustor[J].Combustion Science and Technology, 2016, 188: 1283-1302.
[4] Jin Y, He X, Zhang J, et al. Numerical Investigation on Flow Structures of a Laboratory-Scale Trapped Vortex Combustor[J]. Applied Thermal Engineering, 2014, 66(1): 318-327.
[5] Edmonds R G, Steele R C, Williams J T, et al. Ultra-Low NO_x Advanced Vortex Combustor[R]. ASME 2006-GT-90319.
[6] 邓洋波, 孙海涛, 王玉龙, 等. 氢燃料先进旋涡燃烧室流动和燃烧特性[J]. 航空动力学报, 2013, 28(1): 120-128.
[7] 韩启龙. 中心驻体式驻涡燃烧室实验和数值研究[D]. 大连:大连海事大学, 2013.
[8] 韩吉昂, 李晓东, 钟兢军. 环形中心钝体驻涡燃烧室驻涡腔有无喷射的对比[J]. 航空动力学报, 2015, 30(2): 331-340.
[9] 王玉龙. 三对钝体布置先进旋涡燃烧室流动特性研究[D]. 大连:大连海事大学, 2013.
[10] 孙海俊, 曾卓雄, 徐义华, 等. 横向射流对凹腔湍流特性影响的数值模拟[J]. 推进技术, 2014, 35(1): 54-61. (SUN Hai-jun, ZENG Zhuo-xiong, XU Yi-hua, et al. Effects of Flow Guide Vanes Structure Parameters on Characteristics of Advanced Vortex Combustor[J]. Journal of Propulsion Technology, 2014, 35(1): 54-61)
[11] 曾卓雄, 王志凯. 先进旋涡燃烧室多场协同分析[J]. 推进技术, 2015, 36(12): 1859-1867. (ZENG Zhuo-xiong, WANG Zhi-kai. Numerical Analysis of Multi-Field Synergy in Advanced Vortex Combustor[J]. Journal of Propulsion Technology, 2015, 36(12): 1859-1867.)
[12] Agarwal K K, Ravikrishna R V. Experimental and Numerical Studies in a Compact Trapped Vortex Combustor: Stability Assessment and Augmentation[J]. Combustion Science and Technology, 2011, 183(12): 1308-1327.
[13] Agarwal K K, Krishna S, Ravikrishna R V. Mixing Enhancement in a Compact Trapped Vortex Combustor[J].Combustion Science and Technology, 2013, 185(3): 363-378.
[14] 黄勇. 燃烧与燃烧室[M]. 北京:北京航空航天大学出版社, 2009.
[15] 王志凯, 曾卓雄, 徐义华, 等. 导流片结构参数对先进旋涡燃烧室性能影响研究[J]. 推进技术, 2015, 36(3): 405-412. (WANG Zhi-kai, ZENG Zhuo-xiong, XU Yi-hua, et al. Effects of Flow Guide Vanes Structure Parameters on Characteristics of Advanced Vortex Combustor[J]. Journal of Propulsion Technology, 2015, 36(3): 405-412.)
[16] 王璐. 某型驻涡燃烧室冷却技术研究[D]. 南京:南京航空航天大学, 2012.　　　　　　　　　　　　　*　收稿日期:2017-09-11；修订日期:2017-10-26。基金项目:国家自然科学基金(51066006；51266013)；航空科学基金(2013ZB56002；2013ZB56004)。通讯作者:曾卓雄,男,博士后,教授,研究领域为航空宇航推进理论与工程。E-mail: zengzhuoxiong@tsinghua.org.cn