基于单向陶瓷基复合材料拉伸曲线的细观力学参数识别

推进技术 ›› 2018, Vol. 39 ›› Issue (9): 2121-2126.

基于单向陶瓷基复合材料拉伸曲线的细观力学参数识别

韩笑^1,2,3,高希光^1,2,3,宋迎东^1,2,3

南京航空航天大学能源与动力学院航空发动机热环境与热结构工业和信息化部重点实验室，江苏南京 210016; 南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016; 南京航空航天大学机械结构力学及控制国家重点实验室，江苏南京 210016,南京航空航天大学能源与动力学院航空发动机热环境与热结构工业和信息化部重点实验室，江苏南京 210016; 南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016; 南京航空航天大学机械结构力学及控制国家重点实验室，江苏南京 210016,南京航空航天大学能源与动力学院航空发动机热环境与热结构工业和信息化部重点实验室，江苏南京 210016; 南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016; 南京航空航天大学机械结构力学及控制国家重点实验室，江苏南京 210016

发布日期:2021-08-15
作者简介:韩笑，女，硕士生，研究领域为陶瓷基复合材料。E-mail: 1207266375@qq.com 通讯作者:高希光，男，博士，教授，研究领域为陶瓷基复合材料。
基金资助:
国家重点研发计划(2017YFB0703200)；国家自然科学基金(51575261；51675266)；航空科学基金

Identification of Micromechanical Parameters of Unidirectional Ceramics Matrix Composites Based on Tensile Curves

Key Laboratory of Aero-Engine Thermal Environment and Structure，Ministry of Industry and Information Technology，College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China;Jiangsu Province Key Laboratory of Aerospace Power System，College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China;State Key Laboratory of Mechanics and Control Mechanical Structures，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China,Key Laboratory of Aero-Engine Thermal Environment and Structure，Ministry of Industry and Information Technology，College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China;Jiangsu Province Key Laboratory of Aerospace Power System，College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China;State Key Laboratory of Mechanics and Control Mechanical Structures，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China and Key Laboratory of Aero-Engine Thermal Environment and Structure，Ministry of Industry and Information Technology，College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China;Jiangsu Province Key Laboratory of Aerospace Power System，College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China;State Key Laboratory of Mechanics and Control Mechanical Structures，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China

Published:2021-08-15

摘要/Abstract

摘要： 为了确定陶瓷基复合材料组分材料的细观力学参数，对陶瓷基复合材料拉伸曲线与细观力学参数之间的关系进行了研究，提出了基于单向陶瓷基复合材料拉伸曲线的细观力学参数的识别方法。单向陶瓷基复合材料典型的拉伸曲线可分为三段:初始线性段、过渡段以及第二线性段。基于剪滞模型，建立单向拉伸曲线初始线性段的斜率、第二线性段的斜率以及截距的表达式，并将理论值与实验值进行比较，从而识别出细观力学参数。最后将识别出的细观力学参数带入剪滞模型，并预测SiC/SiC单向陶瓷基复合材料的轴向拉伸应力应变曲线。预测结果与实验吻合很好，说明该细观力学参数的识别方法是可行的。同时采用另一种方法测量纤维弹性模量。两种方法的测量偏差小于5%，进一步证明了本文方法是合理的。

关键词: 单向陶瓷基复合材料；轴向拉伸曲线；剪滞模型；细观力学参数；参数识别

Abstract: In order to determinate the micromechanical parameters of constituents of ceramic matrix composites (CMCs)， the relation between the tensile curves and micromechanical parameters of unidirectional CMCs (UD-CMCs) was investigated. And the micromechanical parameter identification method based on tensile curves of UD-CMCs was proposed. The typical tensile curve of UD-CMCs can be divided into three parts: an initial linear segment， a transition segment and a second linear segment. The theoretical expression of slope of the initial linear segment， the slope and intercept of the second linear segment on the function of micromechanical parameters were obtained based on the shear-lag model. The micromechanical parameters can be identified by comparing the theoretical curve with the experimental curve. Lastly， all identified micromechanical parameters were taken into shear-lag model and the predicted axial tensile curve of the UD-CMCs of SiC/SiC was obtained. The predicted curve fits well with the experimental curve， which proves the method proposed is feasible. Meanwhile， another method was used to measure the elastic modulus of the fiber. The difference between the two methods is less than 5%， which further proves that the method in this paper is reasonable.

Key words: Unidirectional ceramic matrix composites；Axial tensile curve；Shear-lag model；Microstructure parameters；Parameters identification

韩笑,高希光,宋迎东. 基于单向陶瓷基复合材料拉伸曲线的细观力学参数识别[J]. 推进技术, 2018, 39(9): 2121-2126.

HAN Xiao^1,2,3,GAO Xi-guang^1,2,3,SONG Ying-dong^1,2,3. Identification of Micromechanical Parameters of Unidirectional Ceramics Matrix Composites Based on Tensile Curves[J]. Journal of Propulsion Technology, 2018, 39(9): 2121-2126.

参考文献

[1] 李志永, 郑日恒, 李立翰, 等. 冲压发动机C/SiC喷管承压失效研究[J]. 推进技术, 2013, 34(4): 545-550. (LI Zhi-yong, ZHENG Ri-heng, LI Li-han, et al. Investigation on Pressure Failure of C/SiC Nozzle in Ramjet[J]. Journal of Propulsion Technology, 2013, 34(4):545-550.)
[2] 张杰, 魏鑫, 郑力铭, 等. C/SiC复合材料在空气中的氧化烧蚀[J]. 推进技术, 2008, 29(4): 488-493. (ZHANG Jie, WEI Xin, ZHENG Li-ming, et al. (Oxidation and Ablation of C/SiC Composites in Air[J]. Journal of Propulsion Technology, 2008, 29(4): 488-493.)
[3] 邱海鹏, 陈明伟, 谢巍杰. SiC/SiC陶瓷基复合材料研究及应用[J]. 航空制造技术, 2015, 483(14): 94-97.
[4] Sun Z, Shao H, Chen X, et al. Analysis of Residual Performance of UD-CMC in Oxidation Atmosphere Based on a Notch-Like Oxidation Model[J]. Applied Composite Materials, 2016, 23(5): 1079-1098.
[5] Gao X, Li L, Song Y. A temperature-Dependent Constitutive Model for Fiber-Reinforced Ceramic Matrix Composites and Structural Stress Analysis[J]. International Journal of Damage Mechanics, 2014, 23(4): 507-522.
[6] Iannucci L. Progressive Failure Modelling of Woven Carbon Composite under Impact[J]. International Journal of Impact Engineering, 2006, 32(6): 1013-1043.
[7] Pailler F, Lamon J. Micromechanics Based Model of Fatigue Oxidation for Ceramic Matrix Composites[J]. Composites Science & Technology, 2005, 65(3): 369-374.
[8] Min J B, Xue D, Shi Y. Micromechanics Modeling for Fatigue Damage Analysis Designed for Fabric Reinforced Ceramic Matrix Composites[J]. Composite Structures, 2014, 111(1): 213-223.
[9] Allen D H, Foulk J W, Helms K, et al. A Model for Predicting the Effect of Environmental Degradation on Damage Evolution of Metal-Matrix Composites[J]. Astm Special Technical Publication, 1997, (1315): 17.
[10] Poh L, Della C, Ying S, et al. Micromechanics Model for Predicting Effective Elastic Moduli of Porous Ceramic Matrices with Randomly Oriented Carbon Nanotube Reinforcements[J]. Aip Advances, 2015, 2(9): 38.
[11] Zhao S, Zhou X, Yu J. Effect of Heat Ttreatment on the Mechanical Properties of PIP–SiC/SiC Composites Fabricated with a Consolidation Process[J]. Ceramics International, 2014, 40(3): 3879-3885.
[12] Sahin M, ?etinarslan C S, Akata H E. Effect of Surface Roughness on Friction Coefficients During Upsetting Processes for Different Materials[J]. Materials & Design, 2007, 28(2): 633-640.
[13] Kuntz M, Grathwohl G. Advanced Evaluation of Push-In Data for the Assessment of Fiber Reinforced Ceramic Matrix Composites[J]. Advanced Engineering Materials, 2001, 3(6): 371–379.
[14] Chandra N, Ghonem H. Interfacial Mechanics of Push-Out Tests: Theory and Experiments[J]. Composites Part A, 2001, 32(3–4): 575-584.
[15] Solti J P, Mall S, Robertson D D. Modeling Damage in Unidirectional Ceramic-Matrix Composites[J]. Composites Science & Technology, 1995, 54(1): 55-66.
[16] Fantozzi G, Reynaud P. Mechanical Hysteresis in Ceramic Matrix Composites[J]. Materials Science & Engineering A, 2009, s 521–522(10): 18-23.
[17] Li L, Song Y, Sun Y. Estimate Interface Shear Stress of Unidirectional C/SiC Ceramic Matrix Composites from Hysteresis Loops[J]. Applied Composite Materials, 2013, 20(4): 693-707.
[18] Li L, Song Y. Estimate Interface Frictional Coefficient of Ceramic Matrix Composites from Hysteresis Loops[J].Journal of Composite Materials, 2011, 45(9):989-1006.
[19] Zhang S, Gao X, Dong H, et al. Effects of Gradual Matrix Crack Closure on the Constitutive Behavior of SiC/SiC Composites Upon Unloading[J]. Ceramics International, 2016, 43(2): 1839-1842.
[20] Aveston J. Single and Multiple Fracture[J]. Properties of Fiber Composites, 1971, (1).
[21] Zhang S, Gao X, Chen J, et al. Strength Model of the Matrix Element in SiC/SiC Composites[J]. Materials & Design, 2016, 101: 66-71.
[22] Lissart N, Lamon J. Damage and Failure in Ceramic Matrix Minicomposites: Experimental Study and Model[J]. Acta Materialia, 1997, 45(3): 1025-1044.
[23] Chateau C, Gélébart L, Bornert M, et al. Modeling of Damage in Unidirectional Ceramic Matrix Composites and Multi-Scale Experimental Validation on Third Generation SiC/SiC Minicomposites[J]. Journal of the Mechanics & Physics of Solids, 2014, 63(1): 298-319.(编辑:田佳莹)　　　　　　　　　　　　　*　收稿日期:2017-09-18；修订日期:2017-10-26。基金项目:国家重点研发计划(2017YFB0703200)；国家自然科学基金(51575261；51675266)；航空科学基金 (2015ZB52015)；江苏高校优势学科建设工程资助项目。作者简介:韩笑,女,硕士生,研究领域为陶瓷基复合材料。E-mail: 1207266375@qq.com通讯作者:高希光,男,博士,教授,研究领域为陶瓷基复合材料。E-mail: gaoxiguang@nuaa.edu.cn