不同边界层厚度下高马赫数进气道自起动过程研究

doi:10.13675/j.cnki. tjjs. 005

推进技术 ›› 2019, Vol. 40 ›› Issue (12): 2684-2693.DOI: 10.13675/j.cnki. tjjs. 005

不同边界层厚度下高马赫数进气道自起动过程研究

施欢¹,谢文忠¹,梁钢¹,金毅¹,靖建朋²

1.南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室;2.中国人民解放军驻西安飞机工业（集团）有限责任公司军事代表室

发布日期:2021-08-15
作者简介:施欢，硕士生，研究领域为内流气体动力学。E-mail：18851176550@163.com

Self-Starting Process of High Mach Number Inlet with Different Boundary Layer Thicknesses

1.Jiangsu Province Key Laboratory of Aerospace Power System,College of Engery and Power Engineering, Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;2.Military Representative Office of China People’s Liberation Army in Xi’an Aircraft Industry(Group) Company Limited,Xi’an 710089,China

Published:2021-08-15

摘要/Abstract

摘要： 为了探寻入口边界层厚度变化对高马赫数进气道自起动性能的影响，对简化的二元高马赫数进气道的加速自起动过程进行数值仿真研究，分析了边界层厚度对自起动过程中流场波系结构变化和自起动性能的影响机制，获得了不同边界层厚度下的进气道自起动性能及主分离包高度的变化规律。结果表明：随着边界层相对厚度从0.05增加至0.3，进气道的自起动马赫数一开始保持不变，然后快速增大；相同主流条件下，不起动流场跨越主分离包无量纲压升和主分离包高度随边界层相对厚度的增大均变小；边界层动量损失厚度和跨越主分离包无量纲压升对进气道起动性能影响重大。

关键词: 高马赫数进气道;边界层厚度;边界层动量损失厚度;主分离包高度;无量纲压升

Abstract: In order to explore the effect of inlet boundary layer thickness on self-starting performance of high Mach number inlets, numerical simulation and theoretical analysis were carried out. The self-starting performance of the inlet and the height of the primary separation bubble with different boundary layer thicknesses were obtained. The influencing mechanism on flow field structure and self-starting performance were also analyzed. The results indicated that: As the relative thickness of the boundary layer increases from 0.05 to 0.3, the self-starting Mach number of the inlet remains unchanged at first, and then increases rapidly. Under the same mainstream conditions, dimensionless pressure rise across the primary separation bubble and the primary separation bubble height both decrease with the increase of the boundary layer thickness. The boundary layer momentum deficit thickness and the dimensionless pressure rise determine the self-starting performance of high Mach number inlets.

Key words: High Mach number inlets;Boundary layer thickness;Boundary layer momentum deficit thickness;Primary separation bubble height;Dimensionless pressure rise

施欢,谢文忠,梁钢,金毅,靖建朋. 不同边界层厚度下高马赫数进气道自起动过程研究[J]. 推进技术, 2019, 40(12): 2684-2693.

SHI Huan¹,XIE Wen-zhong¹,LIANG Gang¹,JIN Yi¹,JING Jian-peng². Self-Starting Process of High Mach Number Inlet with Different Boundary Layer Thicknesses[J]. Journal of Propulsion Technology, 2019, 40(12): 2684-2693.

参考文献

[1] Weiting A R. Exploratory Study of Transient Unstart Phenomenon in a Three-Dimensional Fixed-Geometry Scramjet Engine[R]. NASA TND-8156, 1976.
[2] Van Wie D M， Kwok F T， Walsh R F. Starting Characteristics of Supersonic Inlets[R]. AIAA96-2914.
[3] Henry J R， Andrews E HPinckney ，， et al. Boundary Layer and Starting Problems on a Short Axisymmetric Scramjet Inlet[R]. NASA SP-216， 1969.
[4] Goldberg T J， Hefner J N. Starting Phenomena for Hypersonic Inlets with Thick Boundary Layers at Mach 6[R]. NASA TN-D6280， 1971.
[5] 王翼. 高超声速进气道启动问题研究[D]. 长沙：国防科学技术大学， 2008.
[6] 陈卫明. 二元高超声速进气道自起动特性的影响因素分析[D]. 南京：南京航空航天大学， 2013.
[7] 葛严，谢文忠，靖建朋，等. 内压缩段构型对高超声速进气道自起动性能的影响[J]. 航空动力学报， 2017， 32(5): 1148-1159.
[8] 潘瑾，张堃元. 可变内收缩比侧压式进气道自起动性能[J]. 推进技术， 2007， 28(3): 278-281. (PAN Jin， ZHANG Kun-yuan. Self-Starting Characteristics for Sidewall-Compression Inlet with Variable Internal Contraction Ratio[J]. Journal of Propulsion Technology， 2007， 28(3): 278-281.)
[9] Hawkins W R， Marquart E J. Two-Dimensional Generic Inlet Unstart Detection at Mach 2.5~5.0[R]. AIAA95-6016.
[10] Herrmann C， Koschel W. Experimental Investigation of the Internal Compression Inside a Hypersonic Intake[R]. AIAA2002-4130.
[11] 梁德旺，袁化成，张晓嘉. 影响高超声速进气道起动能力的因素分析[J]. 宇航学报， 2006， 27(4): 714-719.
[12] 范轶，常军涛，鲍文. 壁面温度对高超声速进气道不起动/再起动特性的影响[J]. 固体火箭技术， 2009， 32(3): 266-270.
[13] 刘红. 二元高超声速进气道自起动影响因素研究[C]. 桂林：中国力学学会， 2012.
[14] Zhang Y， Tan H J. Influence of Expansion Waves on Cowl Shock/Boundary Layer Interaction in Hypersonic Inlet[J]. Journal of Propulsion and Power， 2014， 30(5):1183-1191.
[15] Mukerjee T， Martin B W. Turbulent Shear Layer Reattachment Downstream of a Backward-Facing Step in Confined Supersonic Axisymmetric Flow[J]. Journal of Fluid Mechanics， 1969， 39(2): 307-319.
[16] Zhang Y， Tan H J， Tian F C， et al. Control of Incident Shock/Boundary-Layer Interaction by a Two-Dimensional Bump[J]. AIAA Journal， 2014， 52(4): 767-776.
[17] Wang Z G， Zhao Y L， Zhao Y X， et al. Prediction of Massive Separation of Unstarted Inlet via Free-Interaction Theory[J]. AIAA Journal， 2015， 53(4): 1108-1112.
[18] 林宇，谢文忠，张德平，等. 不起动流场对超声速/高超声速进气道自起动性能的影响[J]. 航空动力学报， 2018， 33(7): 1647-1656.
[19] Souverein L J， Bakker P G， Dupont P. A Scaling Analysis for Turbulent Shock-Wave/Boundary-Layer Interactions[J]. Journal of Fluid Mechanics， 2013， 714(1):505-535.
[20] Délery J， Marvin J G， Reshotko. Shock-Wave Boundary Layer Interactions[M]. Combridge: Combridge University Press, 2011.
[21] Xie W Z， Wu Z M， Yu A Y， et al. Control of Severe Shock-Wave/Boundary-Layer Interactions in Hypersonic Inlets[J]. Journal of Propulsion & Power， 2017， 33(3):1-10.

不同边界层厚度下高马赫数进气道自起动过程研究

Self-Starting Process of High Mach Number Inlet with Different Boundary Layer Thicknesses

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价