Bump/前体一体化对高速进气道起动特性的影响研究

推进技术 ›› 2019, Vol. 40 ›› Issue (4): 780-785.

Bump/前体一体化对高速进气道起动特性的影响研究

徐尚成,王翼,王振国,范晓樯

国防科技大学高超声速冲压发动机技术重点实验室，湖南长沙 410073,国防科技大学高超声速冲压发动机技术重点实验室，湖南长沙 410073,国防科技大学高超声速冲压发动机技术重点实验室，湖南长沙 410073,国防科技大学高超声速冲压发动机技术重点实验室，湖南长沙 410073

发布日期:2021-08-15
作者简介:徐尚成，硕士生，研究领域为高速空气动力学。E-mail: shangchengxu@yeah.net 通讯作者:王翼，博士，副研究员，研究领域为高速空气动力学。

关键词:进气道；Bump；起动；分离区

Science and Technology on Scramjet Laboratory，National University of Defense Technology，Changsha 410073，China,Science and Technology on Scramjet Laboratory，National University of Defense Technology，Changsha 410073，China,Science and Technology on Scramjet Laboratory，National University of Defense Technology，Changsha 410073，China and Science and Technology on Scramjet Laboratory，National University of Defense Technology，Changsha 410073，China

Published:2021-08-15

摘要/Abstract

摘要： 基于下颌式进气道将Bump/前体一体化设计方法应用于进气道设计，采用特征线法设计五种不同型面的前体，并采用数值仿真的方法，计算每种Bump/前体一体化进气道的自起动过程。研究表明:加入合适的Bump型面可极大提高进气道起动性能，将横向压力梯度集中在侧板附近的构型使进气道自起动马赫数降低了0.95。Bump/前体一体化对不起动状态下分离区形态进行三维重构，改变了分离区内横向溢流，从而改变了进气道起动能力。另外，通过对进气道起动过程的研究发现，进气道内形成封闭式分离区时，通常在高于设计马赫数时才能起动，进气道设计中应尽量避免这种状态的出现。

关键词: 进气道；Bump；起动；分离区

Abstract: The method of Bump/forebody integration is employed in inlet design to improve the performance of starting. Five inlets with different forebody surfaces are obtained by the method of characteristics based on a chin inlet and the starting processes of the five inlets are computed. Numerical simulations show that suitable surface can improve the starting performance. In this paper， the forebody which the transverse pressure gradient is set near the sidewall， leads to a reduction of self-start Mach number by 0.95. During the starting process， the shape of separation zone is rebuilt， which makes the spillage easier. What’s more， it is found that when closed separation zone is formed in the starting process， inlet starts at a higher Mach number than the design point， which should be avoided in inlet design.

Key words: Inlet；Bump；Inlet start；Separation zone

徐尚成,王翼,王振国,范晓樯. Bump/前体一体化对高速进气道起动特性的影响研究[J]. 推进技术, 2019, 40(4): 780-785.

XU Shang-cheng,WANG Yi,WANG Zhen-guo,FAN Xiao-qiang. 关键词:进气道；Bump；起动；分离区[J]. Journal of Propulsion Technology, 2019, 40(4): 780-785.

参考文献

[1] 刘兴洲. 中国超燃冲压发动机研究回顾[J]. 推进技术, 2008, 29(4): 385-395. (LIU Xing-zhou. Review of Scramjet Research in China[J]. Journal of Propulsion Technoloy, 2008, 29(4): 385-395.)
[2] 金志光, 张堃元. 二维非常规压缩型面超/高超声速进气道概念[J]. 推进技术, 2004, 25(3):226-229. (JIN Zhi-guang, ZHANG Kun-yuan. Concept of a Two-Dimensional Supersonic/Hypersonic Inlet with a Non-Conventional Compression Wall[J]. Journal of Propulsion Technoloy, 2004, 25(3): 226-229.)
[3] 王翼. 高超声速进气道启动问题研究[D]. 长沙:国防科技大学, 2008.
[4] Eiman B Saheby, Huang Guo-ping, Anthony Hays. Design of Hypersonic Forebody by the Combination of Bump and Waverider Surfaces [C]. Xiamen: The 21st AIAA International Space Planes and Hypersonics Technologies Conference, 2017.
[5] Svensson M. A CFD Investigation of a Generic Bump and Its Application to a Diverterless Supersonic Inlet [D]. Sweden: Swedish Defence Research Agency, 2008.
[6] 谭慧俊, 郭荣伟. 一种背负式无附面层隔道进气道的数值模拟研究与实验验证[J]. 航空学报, 2004, 25(6): 540-545.
[7] 赵振山, 马晓光, 杜羽. 某Bump进气道流动控制计算研究[J]. 空气动力学学报, 2016, 34(4): 476-481.
[8] 杨应凯, 李玉璞. JSF X-35的一绝——无附面层隔道超声速进气道[J]. 国际航空, 2001, (8): 13-15.
[9] 杨应凯. Bump进气道设计与试验研究[J]. 空气动力学学报, 2007, 25(3): 336-338.
[10] 尚仁操, 杨应凯. 不同鼓包高度和唇口后掠角的蛇形进气道设计及CFD计算分析 [J]. 航空工程, 2009, (3): 12-17.
[11] Masud J, Akram F. Flow Field and Performance Analysis of an Integrated Diverterless Supersonic Inlet[C]. Orlando: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2010.
[12] Masud J, Akram F. Effect of Passive Bleed System on an Integrated Diverterless Supersonic Inlet[C]. Orlando: The 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2011.
[13] 张悦, 谭慧俊, 张启帆, 等. 一种进气道内激波/边界层干扰控制的新方法及其流动机理[J]. 宇航学报, 2012, 33(2): 265-274.
[14] XU Shang-cheng, WANG Yi, WANG Zhen-guo, et al. The Design and Analysis of Bump in High Speed Supersonic Flow[C]. Xiamen: The 21st AIAA International Space Planes and Hypersonics Technologies Conference, 2017.
[15] Xu Shang-cheng, Wang Yi, Wang Zhen-guo, et al. Design and Analysis of Hypersonic Inlet with Integrated Bump/Forebody[J]. Chinses Journal of Aeronautics, 2018.
[16] 朱伟, 张堃元, 南向军. 壁面马赫数分布规律可控的新型内收缩基准流场设计方法[J]. 推进技术, 2013, 34(4): 433-438. (ZHU Wei, ZHANG Kun-yuan, NAN Xiang-jun. Investigation on Basic Flowfield with Controlled Mach Number Gradient for Hypersonic Inward Turning Inlets[J]. Journal of Propulsion Technoloy, 2013, 34(4): 433-438.)
[17] Van Wie D M, Kwok F T, Walsh R F. Starting Characteristics of Supersonic Inlets[R]. AIAA 96-2914.
[18] LIU Xiong, LIANG Jian-han, WANG Yi. Research on the Effect of Cowl Lip Angle on the Accelerating Start Process of a Two-Dimensional Hypersonic Inlet[J]. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering, 2016, 230(14).　　　　　　　　　　　　　　收稿日期:2018-05-28；修订日期:2018-07-12。作者简介:徐尚成,硕士生,研究领域为高速空气动力学。E-mail: shangchengxu@yeah.net通讯作者:王翼,博士,副研究员,研究领域为高速空气动力学。E-mail: wange_nudt@163.com(编辑:朱立影)