基于实验设计和生死单元技术的时变质量杆件轴向振动问题研究

推进技术 ›› 2019, Vol. 40 ›› Issue (5): 1118-1128.

基于实验设计和生死单元技术的时变质量杆件轴向振动问题研究

贾德君¹,李范春¹,马雪松²

大连海事大学船舶与海洋工程学院，辽宁大连 116026,大连海事大学船舶与海洋工程学院，辽宁大连 116026,北京动力机械研究所高超声速冲压发动机技术重点实验室，北京 100074

发布日期:2021-08-15
作者简介:贾德君，博士生，研究领域为结构振动及结构优化。E-mail: junge_tt@163.com 通讯作者:李范春，博士，教授，博士生导师，研究领域为结构振动及结构优化。
基金资助:
航天支撑技术基金2014。

Study of Axial Vibration of Time-Varying Mass Rods Based on Experiment Design and Elements Birth and Death Method

Ship and Ocean Engineering College，Dalian Maritime University，Dalian 116026，China,Ship and Ocean Engineering College，Dalian Maritime University，Dalian 116026，China and Science and Technology on Scramjet Laboratory，Beijing Power Machinery Institute，Beijing 100074，China

Published:2021-08-15

摘要/Abstract

摘要： 为研究固体火箭轴向振动问题，将火箭体系简化为时变质量轴向振动杆件。应用生死单元技术对时变质量杆件指定区域内均布质量的损失进行模拟。应用参数化方法将杆件的弹性模量及指定区域内均布质量线密度进行参数化，应用拉丁超立方抽样方法(LHS)及平面蒙特卡洛抽样方法(PMC)对时变质量杆件与恒定质量杆件的轴向振动问题进行2因素50水平实验设计，批量计算了不同工况下的杆件轴向振动响应。计算结果表明:基于实验设计和生死单元技术的参数化研究方法可以高效地对时变质量结构动力响应问题进行研究。应用LHS及PMC对杆件轴向振动问题进行研究时，可以得到与应用完备实验对杆件轴向振动问题进行研究时所得结论相类似的定性结论。部分工况下，恒定质量杆件的最大轴向振动响应明显小于时变质量杆件的最大轴向振动响应。依据恒定质量体系动力响应特性对箭体进行设计时，无法保证箭体及箭载设备的安全性。

关键词: 固体火箭；振动；时变质量；生死单元；实验设计；参数化；拉丁超立方

Abstract: In order to study the axial vibration of a solid rocket， a solid rocket system was simplified as a rod in axial vibration state. Mass reduction in a specific area of a rod in a time domain was simulated with the application of element birth and death method. Parameteric method was applied in the research to parameterize the elastic modulus and initial distributed mass density of rods. Latin Hypercube Sample method (LHS) and Plain Monte Carlo method (PMC) were applied in the experiment design of axial vibration problem of constant mass rods and time-varying mass rods with the density of initial distributed mass in the specific zone of rods and elastic modulus of rods as two factors. Each design had 50 levels， and the axial vibration of rods in different cases were calculated in batches. The results show that the dynamic response of time-varying mass rods can be investigated efficiently with the application of the parameteric method based on experiment design and element birth and death method. Similar qualitative conclusions can be drawn from the investigations of axial vibration of rods with the application of LHS， PMC and full sample experiment. Maximum axial vibration of constant mass rods are significantly lower than those of time-varying mass rods in some cases. Design of a rocket structure based on the characters of a constant mass system cannot guarantee the safety of the rocket and its facilities.

Key words: Solid rocket；Vibration；Time varying mass；Element birth and death；Experiment design；Parameteric method；Latin hypercube sample method

贾德君,李范春,马雪松. 基于实验设计和生死单元技术的时变质量杆件轴向振动问题研究[J]. 推进技术, 2019, 40(5): 1118-1128.

JIA De-jun¹,LI Fan-chun¹,MA Xue-song². Study of Axial Vibration of Time-Varying Mass Rods Based on Experiment Design and Elements Birth and Death Method[J]. Journal of Propulsion Technology, 2019, 40(5): 1118-1128.

参考文献

[1] Cveticanin L. Dynamics of Bodies with Time-Variable Mass[M]. Germany: Springer International Publishing,2016.
[2] Cveticanin L. Vibrations of a Textile Machine Rotor[J].Journal of Sound and Vibration, 1984, 97(2): 181-187.
[3] Cveticanin L. The Stability of a Textile Machine Rotor with Increasing Mass[J]. Mechanism and Machine Theory, 1988, 23(4): 275-278.
[4] Cveticanin L. Stability of a Clamped-Free Rotor with Variable Mass for the Case of Radial Rubbing[J]. Journal of Sound and Vibration, 1989, 129(3): 489-499.
[5] Cveticanin L. The Oscillations of a Textile Machine Rotor on Which the Textile is Wound Up[J]. Mechanism and Machine Theory, 1991, 26(3): 253-260.
[6] Cveticanin L. Approximate Solution of a Time-Dependent Differential Equation[J]. Meccanica, 1995, 30(6): 665-671.
[7] Mcphee J J, Dubey R N. Dynamic Analysis and Computer Simulation of Variable-Mass Multi-Rigid-Body Systems[J]. International Journal of Numerical Methods Engineering, 1991, 32(8): 1711–1725.
[8] Djerassi S. An Algorithm for Simulation of Motions of ‘Variable Mass’ Systems[J]. Advanced Astronaut Science, 1998, 99(1): 461–474.
[9] Waishek J, Dogan A, Bestaoui Y. Investigation into the Time Varying Mass Effect on Airship Dynamic Response[C]. Florida: 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition , 2009.
[10] Waishek J, Kumar V, Dogan A. Investigation into the Time Varying Mass Effect on Airship Controller Performance[C]. Illinois: AIAA Atmospheric Flight Mechanics Conference, 2009.
[11] Bestaoui Y. A Lagrangian Approach to Modeling of an Airship with Wind and Varying Mass Effects[C]. Florida: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2010.
[12] Kayuk Y F, Denisenko V I. Motion of a Mechanical System with Variable Mass-Inertial Characteristics[J]. International Applied Mechanics, 2004, 40(7): 814–820.
[13] 朱斯岩, 朱礼文. 运载火箭动态载荷识别研究[J]. 振动工程学报, 2008, 21(2): 135-139.
[14] Meirovitch L. General Motion of a Variable-Mass Flexible Rocket with Internal Flow[J]. Journal of Spacecraft and Rocket, 1970, 7(2): 186–195.
[15] Tran T, Eke F O. Effects of Internal Mass Flow on the Attitude Dynamics of Variable Mass Systems[J]. Advanced Astronaut Science, 2005, 119: 1297–1316.
[16] Holl H J, Belyaev A K, Irschik H. Simulation of the Duffing-Oscillator with Time-Varying Mass by a BEM in Time[J]. Computers & Structures, 1999, 73(1–5):177-186.
[17] Banerjee A K. Dynamics of a Variable-Mass, Flexible-Body System[J]. Journal of Guidance Control & Dynamics, 2000, 23(3): 501-508.
[18] 邢誉峰, 谢珂, 潘忠文. 纵向过载环境下变质量欧拉梁动特性分析方法[J]. 北京航空航天大学学报, 2013, 39(8): 999-1003.
[19] 王宇楠, 邢誉峰. 变质量梁的自适应Newmark法[J]. 北京航空航天大学学报, 2014, 40(6):829-833.
[20] Zhao R, Yu K. An Efficient Transient Analysis Method for Linear Time-Varying Structures Based on Multi-Level Sub-Structuring Method[J]. Computers & Structures, 2015, 146(1): 76-90.
[21] 马驰骋, 张希农, 罗亚军, 等. 变质量矩形贮箱流固耦合系统动力学特性分析[J]. 西安交通大学学报, 2014, 48(7): 109-116.
[22] 马驰骋, 张希农, 罗亚军, 等. 航天器贮箱变质量流固耦合系统的动力学响应[J]. 航空动力学报, 2015, 30(3): 736-745.
[23] 杨育文, 邓康清, 余小波, 等. 高含铝推进剂低压固体火箭发动机尾流场复燃数值模拟与实验研究[J]. 推进技术, 2017, 38(3): 680-686. (YANG Yu-wen, DENG Kang-qing, YU Xiao-bo, et al. Numerical Simulation and Experimental Investigation on Plume Afterburing of Low-Pressure Solid Rocket Motor with Highly Aluminized Propellant [J]. Journal of Propulsion Technology, 2017, 38(3): 680-686.)
[24] 武侠, 曾旭, 黄坚, 等. 火箭发动机尾部结构优化研究[J]. 推进技术, 2017, 38(12): 2822-2829. (WU Xia, ZENG Xu, HUANG Jian, et al. Research on Tail Structure Optimization for Solid Rocket Motor[J]. Journal of Propulsion Technology, 2017, 38(12): 2822-2829.)
[25] 魏祥庚, 李娜, 李江, 等. 涡流阀固体变推力发动机控制流参数影响规律研究[J]. 推进技术, 2017, 38(6): 1235-1240. (WEI Xiang-geng, LI Na, LI Jiang, et al. Research on Influence Law of Vortex Valve SRM Thrust Modulation Affected by Control Flow Parameters[J]. Journal of Propulsion Technology, 2017, 38(6): 1235-1240.)
[26] Newmark N M. A Method of Computation for Structural Dynamics[J]. Journal of Engineering Mechanics, 1959, 85(3): 67-94.　　　　　　　　　　　　　　收稿日期:2018-04-12；修订日期:2018-07-04。基金项目:航天支撑技术基金2014。作者简介:贾德君,博士生,研究领域为结构振动及结构优化。E-mail: junge_tt@163.com通讯作者:李范春,博士,教授,博士生导师,研究领域为结构振动及结构优化。E-mail: lee_fc@126.com(编辑:梅瑛)