大子午扩张涡轮扇形叶栅变工况性能实验研究

推进技术 ›› 2019, Vol. 40 ›› Issue (5): 986-995.

大子午扩张涡轮扇形叶栅变工况性能实验研究

孟福生,高杰,郑群,付维亮,刘学峥

哈尔滨工程大学动力与能源工程学院，黑龙江哈尔滨 150001,哈尔滨工程大学动力与能源工程学院，黑龙江哈尔滨 150001,哈尔滨工程大学动力与能源工程学院，黑龙江哈尔滨 150001,哈尔滨工程大学动力与能源工程学院，黑龙江哈尔滨 150001,哈尔滨工程大学动力与能源工程学院，黑龙江哈尔滨 150001

发布日期:2021-08-15
作者简介:孟福生，博士生，研究领域为叶轮机械气动热力学。E-mail: B115030003@hrbeu.edu.cn 通讯作者:高杰，博士，副教授，研究领域为叶轮机械气动热力学。
基金资助:
国家自然科学基金(51779051)；黑龙江省青年科学基金(QC2016059)；中央高校基本科研业务费专项资金

Experimental Study on Large Meridional Expansion Annular Sector Cascades with Variable Working Conditions

College of Power and Energy Engineering，Harbin Engineering University，Harbin 150001，China,College of Power and Energy Engineering，Harbin Engineering University，Harbin 150001，China,College of Power and Energy Engineering，Harbin Engineering University，Harbin 150001，China,College of Power and Energy Engineering，Harbin Engineering University，Harbin 150001，China and College of Power and Energy Engineering，Harbin Engineering University，Harbin 150001，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究大子午扩张低压涡轮变工况下的流动性能，分别对大子午扩张低压涡轮的两套不同的扇形叶栅进行气动实验研究。在设计进口气流角条件下，分别进行不同高亚声速马赫数出口变工况实验研究；在出口马赫数不变的条件下，完成变攻角实验。分析了大子午叶栅流动损失特点和二次流的影响规律。结果表明:大子午扩张实验叶栅出口存在两个明显的高损失通道涡，上通道涡位于展向1/3位置，远离上端壁，且强度明显大于下通道涡。随着马赫数增加，叶栅出口流动损失增加了15%。大子午扩张涡轮端壁曲率影响近端壁叶片的压强分布和变工况敏感性，优化端壁曲率将有助于流动状态的改善。

关键词: 大子午扩张涡轮；扇形叶栅；高亚声速；变工况；气动性能实验

Abstract: In order to study the flow performance of the low-pressure turbine with large meridional expansion under variable conditions， the aerodynamic performance experiments of two sets of different large meridional expansion annular sector cascades are carried out. Under the condition of designed inlet flow angle， the experimental study on variable conditions of different high subsonic Mach number at the outlet is carried out. Under the condition of constant outlet Mach number， the variable inlet flow angle experiments are completed. The characteristics of flow loss and the influence rule of secondary flow are analyzed. The results show that there are two obvious passage vortexes in the outlet. The upper passage vortex is located in 1/3 position， away from the shroud， and the intensity is significantly greater than that of the lower passage vortex. With the increase of Mach number， the flow loss of cascade outlet increased by 15%. The curvature of the endwall affects the pressure distribution of the proximal blade and the sensitivity of the variable conditions. The optimization of the curvature of the endwall will help the flow condition.

Key words: Large meridional expansion turbine；Annular sector cascade；High subsonic Mach number；Variable working conditions；Aerodynamic performance experiment

孟福生,高杰,郑群,付维亮,刘学峥. 大子午扩张涡轮扇形叶栅变工况性能实验研究[J]. 推进技术, 2019, 40(5): 986-995.

MENG Fu-sheng,GAO Jie,ZHENG Qun,FU Wei-liang,LIU Xue-zheng. Experimental Study on Large Meridional Expansion Annular Sector Cascades with Variable Working Conditions[J]. Journal of Propulsion Technology, 2019, 40(5): 986-995.

参考文献

[1] Norris G, Dominy R G. Diffusion Rate Influences on Inter-Turbine Diffusers[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 1997, 211(3): 235-242.
[2] Norris G, Dominy R G, Smith A D. Strut Influences Within a Diffusing Annular S-Shaped Duct[R]. ASME 98-GT-425.
[3] Stüer H, Truckenmüller F, Borthwick D, et al. Aerodynamic Concept for Very Large Steam Turbine Last Stages [R]. ASME GT 2005-68746.
[4] Luo J Q, Tang X, Duan Y H. An Iterative Inverse Design Method of Turbomachinery Blades by Using Proper Orthogonal Decomposition[R]. ASME GT 2015-42876.
[5] Gunaraj J, Hanson D, Hayes J, et al. A Comparison of Two Fan Stage Designs with Different Rotor Leading Edge Sweep[R]. ASME GT 2014-27218.
[6] 张永刚. 透平叶栅气动特性实验研究[D]. 北京:华北电力大学, 2009.
[7] 唐洪飞, 颜培刚, 黄洪雁, 等. 大子午扩张涡轮的分离控制[J]. 航空学报, 2009, 30(5): 825-831.
[8] 唐洪飞, 黄洪雁, 韩万金. 大子午扩张涡轮过渡段的子午型线[J]. 推进技术, 2009, 30(4): 439-445. (TANG Hong-fei, HUANG Hong-yan, HAN Wan-jin. Meridional Passage Contour of a Large Meridional Expansion Turbine[J]. Journal of Propulsion Technology, 2009, 30(4): 439-445.)
[9] 高杰, 郑群, 赵旭东, 等. 大子午扩张变几何动力涡轮流场及损失特性分析[J]. 机械工程学报, 2017, 53(10): 193-200.
[10] 楚武利, 刘前智, 胡春波. 航空叶片机原理[M]. 西安:西北工业大学出版社, 2009.
[11] Pesatori E, Dossena V, D’Ippolito G. Stagger Angle and Pitch-Chord Ratio Effects on Secondary Flow Downstream of a Turbine Cascade at Several Off-Design Condition[R]. ASME GT 2004-54083.
[12] Jouini D B M, Sjolander S A, Moustapha S H. Midspan Flow-Field Measurements for Two Transonic Linear Turbine Cascade at Off-Design[R]. ASME 2001-GT-0493.
[13] 钟兢军, 高海洋, 武卉, 等. 变马赫数涡轮平面叶栅流场的实验研究[J]. 工程热物理学报, 2013, 34 (1): 45-49.
[14] 胡松岩. 大飞机发动机多级低压涡轮设计技术分析[C]. 深圳:大型飞机关键技术高层论坛暨中国航空学会年会, 2007.
[15] 周恩东, 高杰, 郑群, 等. 大子午扩张涡轮叶片正交设计及性能分析[J]. 推进技术, 2016, 37(12):2261-2269. (ZHOU En-dong, GAO Jie, ZHENG Qun, et al. Orthogonal Design and Aerodynamic Investigation on Blade of a High Endwall Angle Turbine[J]. Journal of Propulsion Technology, 2016, 37(12): 2261-2269.)
[16] 刘鹏飞, 高杰, 牛夕莹, 等. 大子午扩张变几何涡轮可调叶片端区设计优化[J]. 航空动力学报, 2017, 32(3): 558-567.
[17] 高雷. 船舶汽轮机叶栅气动性能优化与实验[D]. 哈尔滨:哈尔滨工程大学, 2013.　　　　　　　　　　　　　　收稿日期:2018-02-02；修订日期:2018-05-10。基金项目:国家自然科学基金(51779051)；黑龙江省青年科学基金(QC2016059)；中央高校基本科研业务费专项资金面向国家重大需求培育计划(HEUCFP201720)。作者简介:孟福生,博士生,研究领域为叶轮机械气动热力学。E-mail: B115030003@hrbeu.edu.cn通讯作者:高杰,博士,副教授,研究领域为叶轮机械气动热力学。E-mail: gaojie_d@hrbeu.edu.cn(编辑:朱立影)