推进技术 ›› 2020, Vol. 41 ›› Issue (9): 2070-2076.DOI: 10.13675/j.cnki.tjjs.200197

• 燃烧 传热 传质 • 上一篇    下一篇

狭缝斜肋内冷通道流动和换热特性的数值研究

邓贺方,姜玉廷,张建,陆松兵,郑群   

  1. 哈尔滨工程大学 动力与能源工程学院,黑龙江 哈尔滨 150001
  • 出版日期:2020-09-15 发布日期:2020-09-15
  • 作者简介:邓贺方,硕士生,研究领域为航空发动机热端部件传热冷却。E-mail:652286297@qq.com
  • 基金资助:
    国家自然科学基金(51809065);黑龙江省自然科学基金(QC2017047)。

Numerical Study on Flow and Heat Transfer Characteristics of Internal Cooling Channel with Slit Inclined Ribs

  1. College of Power and Energy Engineering,Harbin Engineering University,Harbin 150001,China
  • Online:2020-09-15 Published:2020-09-15

摘要: 为了探究狭缝斜肋的流动和换热特性,进一步挖掘传统斜肋的性能,采用数值模拟的方法,研究了五种不同位置和倾斜角度的狭缝对45°斜肋流动和换热特性的影响,计算的进口雷诺数为2×104~8×104,并与传统的实心肋进行了对比分析。结果表明,狭缝的存在显著改变了冷却通道的流动结构以及换热分布,降低了冷却通道的阻力损失,减小了通道整体的强化换热系数,但同时增加了肋片表面的强化换热系数,且狭缝的位置和倾斜角度的不同对通道性能也存在一定的影响。对比综合热效率,狭缝斜肋相比实心肋增加了约12%~15%。

关键词: 内部冷却;狭缝斜肋;阻力损失;换热特性;数值模拟

Abstract: In order to investigate the flow and heat transfer characteristics of slit inclined ribs and further improve the performance of traditional inclined ribs, the effects of five kinds of slits with different locations and angles on flow and heat transfer characteristics of 45° inclined ribs were studied by using numerical simulation method. The inlet Reynolds number calculated in this study is ranged from 2×104 to 8×104. A comparison and analysis with traditional solid ribs was conducted. The results show that the slits change the flow structure and heat transfer distribution of cooling channel. The slits decrease the resistance loss and enhanced heat transfer coefficient of cooling channel, but it increases the enhanced heat transfer coefficient of the rib surfaces. On the other hand, the location and the angle of the slits also have some effects on flow and heat transfer performance of cooling channel. The thermal performance factors of the slit inclined ribs increase by 12%~15%, compared with solid ribs.

Key words: Internal cooling;Slit inclined rib;Resistance losses;Heat transfer characteristics;Numerical simulation