推进技术 ›› 1989, Vol. 10 ›› Issue (1): 19-26.

• • 上一篇    下一篇

玻璃钢圆筒壳体内压下的变形及破坏强度

伍天剑   

  1. 航空航天部四院41所
  • 发布日期:2021-08-15

DEFORMATION AND BURST STRENGTH OF GFRP OYLIDERS UNDER INTERNAL PRESSURE

  1. Research Inatitace of Poper,Genration Machinery,Inner Mongolia
  • Published:2021-08-15

摘要: 本文以线弹性薄膜理论为基础对固休火箭发动机玻璃钢筒体内压下变形,同时应用最小余能原理对其破坏强度问题分别进行了理论分析与计算.通过对全尺寸壳体的变形测试和爆破压力试验,以及对标准容器进行的批量爆破试验,证实理论分析基本符合试验结果.

关键词: 火箭发动机壳体;玻璃纤维增强塑料;强度计算;应变;固体火箭发动机

Abstract: In present paper, the deformation and the burst strength of solid rocket motor cylinders (SRMC) made of glass-fiber reinforced plastics ( GFRP) are analysed based on the theory of linear film elasticity and the principle of minimum complementary strain energy espeotively,The measurements on deflections and burst pressures of full--size cases and of different size soandard vessels are conformed with the theoretioally calcutlated results very well.

Key words: Rocket engine case;Class fiber reinforced plastic;Strength co-mputation;Strain;Solid rocket engine