基于模态频率的V型缺口梁裂纹扩展速率模型

doi:10.13675/j.cnki. tjjs. 180671

推进技术 ›› 2019, Vol. 40 ›› Issue (11): 2571-2578.DOI: 10.13675/j.cnki. tjjs. 180671

基于模态频率的V型缺口梁裂纹扩展速率模型

刘文光¹,戴文柯¹

南昌航空大学航空制造工程学院

发布日期:2021-08-15
基金资助:
国家自然科学基金 51565039;江西省自然科学基金 20181BAB206023;江西省教育厅科技项目 GJJ170584国家自然科学基金（51565039）；江西省自然科学基金（20181BAB206023）；江西省教育厅科技项目（GJJ170584）。

Crack Growth Rate Model Based on Modal Frequencyfor a V-Notched Beam

School of Aeronautical Manufacturing Engineering, Nanchang Hangkong University, Nanchang 330063, China

Published:2021-08-15

摘要/Abstract

摘要： 针对机械结构裂纹扩展预测问题，研究了基于模态频率下降率的V型缺口梁裂纹扩展速率模型。设计了V型缺口梁的疲劳裂纹扩展实验系统，完成了4个试件的模态频率和裂纹扩展实验测试。基于实验结果，讨论了影响V型缺口梁裂纹扩展行为的因素，应用Pairs模型拟合了V型缺口梁的裂纹扩展速率方程，探讨了模态频率下降率与应力强度因子的关系。结合模态频率下降率与裂纹扩展长度及循环加载次数的关系，建立了基于模态频率下降率的裂纹扩展速率模型。结果表明，V型缺口梁的裂纹扩展速率随模态频率下降率增加单调递增，裂纹尖端的应力强度因子幅值也随模态频率下降率增加单调递增，基于模型预测的裂纹扩展速率与实验结果基本吻合。所提出的基于模态频率的裂纹扩展速率模型有助于梁的裂纹扩展监测。

关键词: 裂纹扩展;速率模型;缺口梁;模态频率;应力强度因子

Abstract: According to the prediction problem of crack growth of mechanical structures, a crack growth rate model of a V-notched beam by using the decrease ratio of modal frequency was investigated. The experimental system for a V- notched beam was designed, and the modal frequency test and the crack growth test were carried out for 4 specimens. Factors that affect the behavior of the crack growth were discussed by analyzing the experimental results. And the equation of crack growth rate of a V-notched beam was fitted by the Paris model, the relation between the decrease ratio of the modal frequency and the stress intensity factor (SIF) was discussed. Combing the relation of the decrease ratio of the modal frequency， the crack depth and the loading cyclic numbers, the crack growth rate model was proposed by using the decrease ratio of the modal frequency in the end. Results indicate that the crack growth rate of the V-notched beam increases with the increasing of the decrease ratio of the first modal frequency monotonically. And also, the amplitude of the SIF increases with the increasing of the decrease ratio of the first modal frequency monotonically. The predicted crack growth rate is agreement with the experimental results basically. The proposed crack growth rate model will help the monitoring of the crack growth of a beam.

Key words: Crack growth;Rate model;Notched beam;Modal frequency;Stress intensity factor

刘文光,戴文柯. 基于模态频率的V型缺口梁裂纹扩展速率模型[J]. 推进技术, 2019, 40(11): 2571-2578.

LIU Wen-guang¹,DAI Wen-ke¹. Crack Growth Rate Model Based on Modal Frequencyfor a V-Notched Beam[J]. Journal of Propulsion Technology, 2019, 40(11): 2571-2578.

参考文献

[1] 钱管良, 顾松年，姜节胜. 含裂纹梁的动力响应[J]. 振动工程学报， 1989， (3): 78-85.
[2] 马一江，陈国平. 含多条裂纹梁的模态与振动疲劳寿命分析[J]. 振动.测试与诊断， 2017， 37(2): 307-313.
[3] 杨鄂川，李映辉，赵翔，等. 含旋转运动效应裂纹梁横向振动特性的研究[J]. 应用力学学报， 2017， 34(6): 1160-1165.
[4] 陈建恩，施月奇，刘军，等. 蒙皮裂纹点阵夹芯梁振动特性分析及裂纹识别[J]. 振动与冲击， 2018， 37(5):220-225.
[5] 梁岗，曹沛，唐炯，等. 基于移动有限元法的裂纹梁振动分析[J]. 动力学与控制学报， 2017， 15(2): 136-141.
[6] 陈岩，王平，余飞，等. 含裂纹梁非线性静动力特性及简化动力学建模[J]. 计算力学学报， 2016， 33(2): 209-215.
[7] 徐可君，江龙平. 裂纹对叶片固有频率影响的分析[J]. 推进技术， 1997， 18(6): 68-71. (XU Ke-jun， JIANG Long-ping. Analysis of Effect of Crack on the Natural Frequency of Blade[J]. Journal of Propulsion Technology， 1997， 18(6): 68-71.)
[8] Liu W， Barkey M E. Nonlinear Vibrational Response of a Single Edge Cracked Beam[J]. Journal of Mechanical Science and Technology， 2017， 31(11): 5231-5243.
[9] Zeng J， Ma H， Zhang W， et al. Dynamic Characteristic Analysis of Cracked Cantilever Beams under Different Crack Types[J]. Engineering Failure Analysis， 2017， 74: 80- 94.
[10] Jena S P， Parhi D R. Dynamic Response and Analysis of Cracked Beam Subjected to Transit Mass[J]. International Journal of Dynamics and Control， 2017， (1): 1-12.
[11] 李清，薛耀东，于强，等. 含预制裂纹L形梁柱试件动态断裂过程[J]. 爆炸与冲击， 2018， 38(3): 491-500.
[12] 岳中文，胡庆文，王煦，等. 冲击载荷下含空孔三点弯曲梁的动态断裂行为[J]. 实验力学， 2017， 32(4): 463-471.
[13] 刘文光，陈国平. 呼吸式裂纹梁的振动疲劳裂纹扩展耦合分析[J]. 中国机械工程， 2010， 21(23): 2798-2802.
[14] Liu W， Barkey M E. The Effects of Breathing Behaviour on Crack Growth of a Vibrating Beam[J]. Shock and Vibration， 2018， (3): 1-12.
[15] Rozumek D， Faszynka S. Influence of the Notch Radius on Fatigue Crack Propagation in Beam Specimens of 2017A-T4 Alloy[J]. Materials Science， 2017， 53(3):417-423.
[16] 崔韦，王建军. 共振条件下的裂纹梁振动与裂纹扩展耦合分析[J]. 推进技术， 2014， 35(10): 1404-1411. (CUI Wei， WANG Jian-jun. Coupling Analysis of Vibration and Crack Propagation for a Cracked Beam at Resonant State[J]. Journal of Propulsion Technology， 2014， 35(10): 1404-1411.)
[17] Lee J W. Crack Identification Method for Tapered Cantilever Pipe-Type Beam Using Natural Frequencies[J]. International Journal of Steel Structures， 2016， 16(2): 467-476.
[18] Mungla M J， Sharma D S， Trivedir R. Identification of a Crack in Clamped-Clamped Beam Using Frequency-Based Method and Genetic Algorithm[J]. Procedia Engineering， 2016， 144: 1426-1434.
[19] Khiem N T， Toan L K. A Novel Method for Crack Detection in Beam-Like Structures by Measurements of Natural Frequencies[J]. Journal of Sound and Vibration， 2014， 333(18): 4084-4103.
[20] 刘文光，郭隆清，贺红林，等. 基于固有频率的呼吸式裂纹梁损伤识别方法[J]. 中国机械工程， 2017， 28(6): 702-707.
[21] 刘文光，李俊，严铖，等. 弹性梁损伤识别模态应变能法[J]. 中国机械工程， 2014， 25(12): 1651-1654.
[22] Curadelli R O， Riera J D， Ambrosini D， et al. Damage Detection by Means of Structural Damping Identification[J]. Engineering Structures， 2008， 30(12): 3497-3504.
[23] Douka E， Bamnios G， Trochidis A. A Method for Determining the Location and Depth of Cracks in Double-Cracked Beams[J]. Applied Acoustics， 2004， 65(10) :997-1008.
[24] 李兵，陈雪峰，向家伟，等. 基于小波有限元法的悬臂梁裂纹识别的试验研究[J]. 机械工程学报， 2005， 41(5): 114-118.
[25] 徐可君，陈华，江龙平. 应用振型识别叶片裂纹故障初探[J]. 推进技术， 1998， 19(5): 66-69. (XU Ke-jun， CHEN Hua， JIANG Long-ping. Discussion of Distinguish Blade Cracks on Vibration Models[J]. Journal of Propulsion Technology， 1998， 19(5): 66-69.)
[26] Liu W， Barkey M E. Frequency Error-Based Identification of Cracks in Beam-Like Structures[J]. Journal of Mechanical Science and Technology， 2017， 31(10): 4657-4667.
[27] Paris P C， Erdogan F. A Critical Analysis of Crack Propagation Laws [J]. Journal of Basic Engineering， 1963， 85: 528-534.
[28] Tada H， Paris P C， Irwin G R. The Stress Analysis of Cracks Handbook [M]. USA: Research Corporation Hellertown， 1973.
[29] 刘文光，陈国平. 含裂纹悬臂梁的振动与疲劳耦合分析[J]. 振动与冲击， 2011， 30(5): 140-144.

基于模态频率的V型缺口梁裂纹扩展速率模型

Crack Growth Rate Model Based on Modal Frequencyfor a V-Notched Beam

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价