Sealing Characteristic Analysis Method of Casing Installation Edge Based on Annular Plate Theory

doi:10.13675/j.cnki.tjjs.190567

Journal of Propulsion Technology ›› 2021, Vol. 42 ›› Issue (2): 431-439.DOI: 10.13675/j.cnki.tjjs.190567

• Structure, Strength and Reliablity • Previous Articles Next Articles

Sealing Characteristic Analysis Method of Casing Installation Edge Based on Annular Plate Theory

Key Laboratory of Advanced Measurement and Test Technique for Aviation Propulsion Systems，Liaoning Province，School of Aero-Engine，Shenyang Aerospace University，Shenyang 110136，China

Online:2021-02-02 Published:2021-08-15

基于环形板理论的机匣安装边密封特性分析方法研究

艾延廷，李传喜，田晶，王志

沈阳航空航天大学航空发动机学院辽宁省航空推进系统先进测试技术重点实验室，辽宁沈阳 110136

作者简介:艾延廷，博士，教授，研究领域为航空发动机强度、振动及噪声。E-mail：ytai@163.com
基金资助:
国家自然科学基金(11702177)；辽宁省自然科学基金(20180550650)。

Abstract

Abstract: In order to solve the problem of modern aero-engine casing installation edge seal design and leakage assessment，the effects of different installation edge structural parameters and casing load on the sealing characteristics of casing installation edge were studied. Based on the annular plate theory， the relationship between the deformation of the casing installation edge and load such as axial force and internal gas pressure is deduced and established. According to this relationship， the influence law of casing installation edge thickness， height and bolt preload on the sealing performance of the installation edge is studied. It is concluded that the relative error of the axial displacement of the installation edge root between the theoretical solution and the finite element calculation is -2.71%， and the relative error of the opening distance between the theoretical solution and the finite element calculation is -1.21%，which has a good engineering accuracy and provides an effective method for the analysis of sealing characteristics and leakage evaluation of the installation edge of the aeroengine casing.

Key words: Aeroengine;Casing;Installation edge;Sealing characteristics;Annular plate theory;Analysis method

摘要： 针对现代航空发动机机匣安装边密封设计与泄漏评估问题，本文开展了不同安装边结构参数及机匣所受载荷对安装边密封特性影响的研究。根据环形板理论，推导并建立了轴向力、内部气体压力等载荷与安装边形变的关系，据此研究了安装边厚度、高度及螺栓预紧力等对安装边密封性能的影响规律。本文得出安装边根部轴向位移理论解与有限元计算结果相对误差为-2.71%，分离距离与有限元计算结果相对误差为-1.21%，具有很好的工程精度，为航空发动机机匣安装边密封特性分析与泄漏评估提供了一种有效方法。

关键词: 航空发动机;机匣;安装边;密封特性;环形板理论;分析方法

AI Yan-ting, LI Chuan-xi, TIAN Jing, WANG Zhi. Sealing Characteristic Analysis Method of Casing Installation Edge Based on Annular Plate Theory[J]. Journal of Propulsion Technology, 2021, 42(2): 431-439.

艾延廷，李传喜，田晶，王志. 基于环形板理论的机匣安装边密封特性分析方法研究[J]. 推进技术, 2021, 42(2): 431-439.

References

[1] 高杰，郑群，李义进. 动叶顶部蜂窝面迷宫密封对涡轮级气动性能的影响［J］. 航空动力学报， 2012， 27（1）： 160-168。
[2] 苏华，陈国定. 指尖密封的温度场及热结构耦合分析［J］. 航空动力学报， 2009， 24（1）： 196-203.
[3] 《航空发动机设计手册》总编委会. 载荷及机匣承力件强度分析（第17册）［M］. 北京：航空工业出版社， 2001.
[4] Schneider R W. Flat Face Flanges with Metal-to-Metal Contact Beyond the Bolt Circle［J］. Journal of Engineering for Power， 1968， 90（1）： 82-88.
[5] Abid M. Determination of Gasketed and Non-Gasketed Flanged Pipe Joint’s Capacity Subjected to Combined Loading： An Experimental Approach［J］. International Journal of Mechanics and Materials in Design， 2005，（2）： 35-47.
[6] Abid M. Determination of Safe Operating Conditions for Gasketed Flange Joint under Combined Internal Pressure and Temperature： A Finite Element Approach［J］. International Journal of Pressure Vessels and Piping， 2006， 83（6）： 433-441.
[7] 焦磊. 压力管道法兰密封与泄漏的浅析［J］. 石油化工技术与经济， 2012， 28（4）： 26-30.
[8] 费继增. 蒸汽管道法兰泄漏原因分析及对策［J］. 化工设备与管道， 2010， 47（1）： 46-48.
[9] 艾延廷，吴立夫，孙丹，等. 基于断裂力学理论的安装边泄漏特性分析［J］. 机械设计与制造， 2017（2）： 168-172.
[10] 艾延廷，来纯强，郝燕平，等. 航空发动机组合式弹性片金属密封环结构密封特性研究［J］. 推进技术， 2018， 39（2）： 426-432.
[11] 周双双，王志德. 基于 ANSYS 薄型排渣闸阀泄漏问题分析［J］. 机械工程与自动化， 2013，（4）： 30-33.
[12] 艾延廷，赵鑫，田晶. 机匣纵向安装边螺栓连结结构参数对泄漏压力的影响［J］. 科学技术工程， 2013， 13（10）： 133-138.
[13] 张庆雅. 火箭发动机法兰连接系统模糊可靠性分析［D］. 西安：西北工业大学， 2003.
[14] 栾宇. 航天器结构中螺栓法兰连接的动力学建模方法研究［D］. 大连：大连理工大学， 2012.
[15] Ma B， Jin F， Sun Z， et al. Leakage Analysis of Bolted Flange Joints Considering Surface Roughness： A Theoretical Model［J］. Proceedings of the Institution of Mechanical Engineers， Part E： Journal of Process Mechanical Engineering， 2017， 232（2）.
[16] Galai H ， Bouzid A H. Analytical Modeling of Flat Face Flanges with Metal-to-Metal Contact Beyond the Bolt Circle［J］. Journal of Pressure Vessel Technology， 2010， 132（6）.
[17] Warren Y， Richard B. Roark’s Formulas for Stress and Strain［M］. New York： McGraw-Hill， 2002.
[18] Schwingshackl C W， Di Maio D， Sever I， et al. Modeling and Validation of the Nonlinear Dynamic Behavior of Bolted Flange Joints［J］. Journal of Engineering for Gas Turbines and Power， 2013， 135（12）.
[19] 马奔奔，朱一超，丁全，等. 无垫圈螺栓连接系统优化设计和泄漏率预测［J］. 强度与环境， 2018，（4）：38-46.

Sealing Characteristic Analysis Method of Casing Installation Edge Based on Annular Plate Theory

基于环形板理论的机匣安装边密封特性分析方法研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 0

Recommended Articles

Metrics

Comments