Journal of Propulsion Technology ›› 2000, Vol. 21 ›› Issue (3): 26-29.

Previous Articles     Next Articles

Measurement and analysis for shock due to the secondary gas injection

  

  1. Dept of Architecture, Harbin Engineering Univ ,Harbin 150001,China;Dept of Architecture, Harbin Engineering Univ ,Harbin 150001,China;Coll of Astronautics, Northwestern Polytechnical Univ ,Xi′an 710072,China
  • Published:2021-08-15

喷管内二次喷射的激波测量与分析

赖川,郜冶,陈步学   

  1. 哈尔滨工程大学建筑工程系!黑龙江哈尔滨150001;哈尔滨工程大学建筑工程系!黑龙江哈尔滨150001;西北工业大学航天工程学院!陕西西安710072
  • 基金资助:
    国家重点实验室基金资助项目

Abstract: Research for bow shock due to secondary gas injection was developed with different points of injection,Mach numbers and jet angles Experiments were carried out in two dimensional rectangular jet for photos taken with Schlieren apparatus The experimental data obtained from Schlieren photograph were compared with the results calculated from the blast wave theory It proved that the shock radium solutions from the blast wave agreement with the experiments

Key words: Engine nozzle;Nozzle flow;Secondary injection;Shock wave;Shock wave measurement

摘要: 研究了不同喷射位置、喷射马赫数和喷射角度的气体二次喷射混合流场的弓形激波形状。在二维矩形喷管内进行二次喷射试验 ,用纹影仪拍摄得到激波照片。将由照片换算得到的激波半径与用爆炸波理论计算的结果相比较 ,证实了爆炸波解在计算激波半径方面提供了与实验较符合的结果

关键词: 发动机喷管;喷管气流;二次喷射;激波;激波测量