Journal of Propulsion Technology ›› 2001, Vol. 22 ›› Issue (3): 229-232.

Previous Articles     Next Articles

Analysis of flow field structure and loss of high pressure guide vane

  

  1. School of Energy Science and Engineering, Harbin Inst.of Technology,Harbin 150001,China;School of Energy Science and Engineering, Harbin Inst.of Technology,Harbin 150001,China;School of Energy Science and Engineering, Harbin Inst.of Technology,Harbin 150001,China;School of Energy Science and Engineering, Harbin Inst.of Technology,Harbin 150001,China
  • Published:2021-08-15

涡轮高压导叶流场结构及损失分析

吴猛,王松涛,王仲奇,冯国泰   

  1. 哈尔滨工业大学能源科学与工程学院!黑龙江哈尔滨150001;哈尔滨工业大学能源科学与工程学院!黑龙江哈尔滨150001;哈尔滨工业大学能源科学与工程学院!黑龙江哈尔滨150001;哈尔滨工业大学能源科学与工程学院!黑龙江哈尔滨150001
  • 基金资助:
    国家自然科学基金 !(5 96 36 180 );科技部 973资助项目

Abstract: The viscous flow field in a high-pressure gas turbine guide vane was simulated by three order accuracy GODUNOV scheme with TVD property. The results indicate that a lot of low energy flow accumulated in the hub region since the radial movement of the secondary flow. Those above result in the increase of energy loss near the hub and even increase the total energy loss. Therefore when using low aspect ratio blade during the design of high pressure guide vane, attention should be made in order to obstruct the radial movement of the secondary flow.

Key words: Turborotor;Three dimension flow;Radial movement;Numerical simulation;viscous flow

摘要: 采用具有TVD性质的三阶精度Godunov格式 ,数值模拟了某型涡轮高压导叶流场 ,并对流场损失及涡系结构进行分析 ,结果表明由于强烈的径向窜流 ,使低能流体大量地迁移到下端壁 ,使得下端部的损失显著增大 ,从而引起了总损失的增加。因此在高压导叶设计中 ,当采用低展弦比叶片时 ,应注意削弱叶片出口附近流场的严重径向窜流。

关键词: 涡轮导向叶片;三维流;径向窜流;数值仿真;粘性流