Journal of Propulsion Technology ›› 2002, Vol. 23 ›› Issue (1): 33-35.

Previous Articles     Next Articles

Improved method of two-phase flow simulation

  

  1. Dept.of Mechanical Engineering,Nanchang Inst. of Aeronautics Technology, Nanchang 330034, China;Coll.of Astronautics,Northwestern Polytechnical Univ.Xi’an 710072,China;Sch;Dept.of Mechanical Engineering,Nanchang Inst. of Aeronautics Technology, Nanchang 330034, China
  • Published:2021-08-15

计算两相流的一种改进方法

曾卓雄,胡春波,姜培正,邹葆华   

  1. 南昌航空工业学院机械系 江西南昌330034;西北工业大学航天工程学院;陕西西安710072;西安交通大学环化学院;江西南昌330034;南昌航空工业学院机械系 江西南昌330034

Abstract: The pressure correction equations of particle kinetic pressure and fluid pressure were established in which correction of particle volumetric fraction and fluid density was considered. A algorithm on compressible two phase turbulent flow was developed. Velocity covariant was adopted, numerical computation for dense incompressible two phase and dilute compressible two phase were performed. It is showed that the calculations agree well with the experimental data, and the simulation method is performable.

Key words: Two phase flow;Two Fluid;Nozzle flow;Numerical analysis;Calculation method

摘要: 针对两相流动中密度及颗粒浓度的变化 ,建立了一种考虑颗粒相体积浓度值变化的颗粒相压力修正方程及考虑可压缩性影响的流体相压力修正方程。在不可压两相流的计算方法上 ,发展了一种计算可压两相流的方法。以速度协变分量为求解变量 ,对不可压两相密相流及可压稀相两相流进行了计算 ,并和已有的实验数据及有关文献进行了比较 ,吻合性较好 ,表明计算方法可行。

关键词: 二相流;双流体;喷管气流;数值仿真;计算方法