Journal of Propulsion Technology ›› 2003, Vol. 24 ›› Issue (2): 130-134.

Previous Articles     Next Articles

Influence of incidence on aerodynamic performance of compressor cascade with positive curved blade

  

  1. Dept. of Thermal Engineering, Tsinghua Univ., Beijing 100084, China;Dept. of Thermal Engineering, Tsinghua Univ., Beijing 100084, China;School of Energy Science and Engineering, Harbin Inst. of Technology, Harbin 150001, China;School of Energy Science and Engineering, Harbin Inst. of Technology, Harbin 150001, China;China Hualu Engineering Corp. , Xi’ an 710065, China
  • Published:2021-08-15

冲角对正弯曲叶片扩压叶栅气动性能的影响

王会社,袁新,钟兢军,王仲奇,马征   

  1. 清华大学热能工程系;北京 100084;清华大学热能工程系;北京 100084;哈尔滨工业大学能源科学与工程学院;黑龙江 哈尔滨 150001;哈尔滨工业大学能源科学与工程学院;黑龙江 哈尔滨 150001;中国华录工程公司 陕西 西安 710065
  • 基金资助:
    国家自然科学基金(50076009,50076019)、973(G1999022306,G1999022307);全国优秀博士学位论文作者专项基金(199932)

Abstract: In order to investigate the influence of incidence on the aerodynamic performance of the compressor cascade with positive curved blades, experiments were conducted in a low speed wind tunnel with planar cascade. Rectangle compressor stator cascades constituted by three different positive curved blades with controlled diffusion airfoils were tested. These include: straight blades, positive curved angle 15?and 20?blades. The distribution of energy loss coefficient at all cascade exits and static pressure coefficient on blade surfaces were acquired. The results show that the total losses of the curved blade cascades are reduced in all test incidences. In positive incidence, the endwall flow of curved blade cascades is improved, and in negative incidence it’ s not so obvious. At the incidence degree of 10? the separation of flow took place everywhere in linear cascade, and so weakened in curved blade cascades.

Key words: Compressor blade;Compressor cascade;Blade airfoil;Bending;Aerodynamic characteristic

摘要: 为了研究冲角对正弯曲叶片压气机叶栅气动性能的影响,在平面叶栅低速风洞上,对具有可控扩散叶型(CDA)的直叶片,正弯曲15°和20°弯曲叶片压气机叶栅在0°,±6°和±10°冲角下进行了实验,获得了不同冲角下不同弯曲角度叶栅出口流场的能量损失系数和叶片表面静压系数等的分布。与直叶栅相比,叶片正弯曲后叶栅总损失在所有冲角下均得到了降低,在正冲角下,叶栅端部流动状况得到改善,在负冲角下,叶栅流道中的流动相对于直叶栅改善不明显。直叶栅在10°冲角下发生了遍布整个流道的分离流动,而正弯曲叶片的采用则削弱了流动的分离。

关键词: 压气机叶片;压气机叶栅;叶型;弯曲;气动特性