Journal of Propulsion Technology ›› 2003, Vol. 24 ›› Issue (2): 166-168.

Previous Articles     Next Articles

Enhancing fuel/oxygen mixing using synthetic jet actuators

  

  1. Inst. of Aerospace and Material Engineering, National Univ. of Defence Technology, Changsha 410073, China;Inst. of Aerospace and Material Engineering, National Univ. of Defence Technology, Changsha 410073, China;Inst. of Aerospace and Material Engineering, National Univ. of Defence Technology, Changsha 410073, China;Inst. of Aerospace and Material Engineering, National Univ. of Defence Technology, Changsha 410073, China;Inst. of Aerospace and Material Engineering, National Univ. of Defence Technology, Changsha 410073, China
  • Published:2021-08-15

应用合成射流技术增强燃气/氧气掺混

罗振兵,夏智勋,王志吉,胡建新,赵建民   

  1. 国防科学技术大学航天与材料工程学院 湖南 长沙 410073;国防科学技术大学航天与材料工程学院 湖南 长沙 410073;国防科学技术大学航天与材料工程学院 湖南 长沙 410073;国防科学技术大学航天与材料工程学院 湖南 长沙 410073;国防科学技术大学航天与材料工程学院 湖南 长沙 410073
  • 基金资助:
    国家自然科学基金(50176055)

Abstract: Based on non-linear control theory of the vortex system, the operation principle, characteristics and potential applications of the synthetic jet technology were introduced briefly. To enhance the fuel/oxygen mixing, simplify the model of synthetic jet actuator, the flow-field of mixing enhancement using synthetic jet actuators at different cases was simulated. It is shown that an appro-priate synthetic jet actuators workgroup can significantly enhance fuel/oxygen mixing.

Key words: Synthetic jet technology+;Control jet;Exciter;Fluidic device;Mixing;Numerical simulation

摘要: 为增强燃气/氧气的掺混,基于旋涡系统的非线性控制理论,在合成射流激励器的简化模型基础上,对激励器组处于不同工作情形下增强燃气/氧气的掺混流场进行了数值模拟和分析比较,结果表明:合适的激励器工作组可以显著增强燃气/氧气的掺混程度及换热,合成射流的控制效果与激励器的布局、强度和相位等密切相关。

关键词: 合成射流技术~+;控制射流;激励器;射流装置;混合;数值仿真