Journal of Propulsion Technology ›› 2003, Vol. 24 ›› Issue (3): 259-264.

Previous Articles     Next Articles

Combustion flow in ejecting mode of strutjet engine(Ⅱ)Effects of secondary combustion and configuration

  

  1. Coll. of Astronautics, Northwestern Polytechnical Univ., Xi’an 710072, China;Coll. of Astronautics, Northwestern Polytechnical Univ., Xi’an 710072, China;Coll. of Astronautics, Northwestern Polytechnical Univ., Xi’an 710072, China
  • Published:2021-08-15

支板火箭引射冲压发动机引射模态燃烧流动 (Ⅱ )二次燃烧及构型的影响

黄生洪,何洪庆,何国强   

  1. 西北工业大学航天工程学院 陕西西安;710072;西北工业大学航天工程学院 陕西西安;710072;西北工业大学航天工程学院 陕西西安;710072
  • 基金资助:
    国防科技重点实验室基金试点项目 (0 0JS60 3 3ZK0 40 1 )

Abstract: 3-D turbulent flows with and without secondary combustion of two configurations of Strutjet RBCC in ejecting mode were investigated. The effects of secondary combustion and configurations on ejecting flow in static sea-level and zero mach conditions were analyzed in detail. The conclusion is that the velocity, total temperature, total pressure and secondary air mass flow rate are determined by both effects of configuration and secondary combustion, but the mixing degree between primary and secondary flow is mainly controlled by configuration, and thus the performance of RBCC.

Key words: Rocket based combined cycle;Ejector ramjet engine;Ejection flow field

摘要: 对比研究了两种构型的支板火箭引射冲压发动机引射模态的瞬时掺混燃烧(SMC)三维掺混和反应流场,详细分析了静态海平面零马赫数情况下燃烧及构型对引射流场的影响,发现几何构型和二次燃烧的综合影响决定了引射掺混后流体的速度、总温、总压及引射流量,从而也主要确定了发动机的性能,其中构型因素主要决定了掺混的质量,从而决定了低速模态的性能。

关键词: 火箭基组合动力循环;引射式冲压发动机;引射流场