Journal of Propulsion Technology ›› 2003, Vol. 24 ›› Issue (4): 323-325.

Previous Articles     Next Articles

Matching between supersonic inlet and aero-engine

  

  1. Dept. of Aeroengine Engineering, Northwestern Polytechnical Univ., Xi’an 710072, China;Dept. of Aeroengine Engineering, Northwestern Polytechnical Univ., Xi’an 710072, China;Dept. of Aeroengine Engineering, Northwestern Polytechnical Univ., Xi’an 710072, China;Dept. of Aeroengine Engineering, Northwestern Polytechnical Univ., Xi’an 710072, China
  • Published:2021-08-15

超声速进气道与发动机的匹配

卢燕,樊思齐,马会民,时瑞军   

  1. 西北工业大学航空动力与热力工程系 陕西西安710072;西北工业大学航空动力与热力工程系 陕西西安710072;西北工业大学航空动力与热力工程系 陕西西安710072;西北工业大学航空动力与热力工程系 陕西西安710072

Abstract: A mathematical model of the supersonic inlet was studied by virtue of the numerical calculation results of the inner flow field for the 2D mix-compression supersonic inlet. The mathematical model describes the relationship among the major performance parameters, in-and-out boundary conditions and the geometric configuration parameters. According to the mathematical model, the matching regulation between the inlet and aero-engine was studied. The influence of the second ramp angle upon the matching point of the inlet and the aero-engine was analyzed by means of the numerical simulations.

Key words: Supersonic inlet;Mathematical model;Aircraft engine;Inlet-engine matching

摘要: 以某二元混压式超声速进气道的流场数值计算结果为基础,得到超声速进气道主要内特性能参数与其进出口边界条件和几何结构参数之间的解析关系,此解析关系即为进气道的数学模型。根据此数学模型,研究了进气道与发动机之间的共同工作规律,并通过数值仿真分析了进气道二级斜板角度对进气道与发动机共同工作点的影响。

关键词: 超声速进气道;数学模型;航空发动机;进气道发动机匹配