Journal of Propulsion Technology ›› 2012, Vol. 33 ›› Issue (2): 239-244.

Previous Articles     Next Articles

Numerical Study on 3-D Two-Phase Flow of Axisymmetric Shock Induction Controlled Vectoring Exhaust Nozzle

  

  1. Missile Institute, Air Force Engineering University, Sanyuan 713800,China;Missile Institute, Air Force Engineering University, Sanyuan 713800,China;Missile Institute, Air Force Engineering University, Sanyuan 713800,China;Missile Institute, Air Force Engineering University, Sanyuan 713800,China
  • Published:2021-08-15

轴对称激波诱导矢量喷管三维两相流数值模拟

宋亚飞,高峰,马岑睿,文科   

  1. 空军工程大学 导弹学院, 陕西 三原 713800;空军工程大学 导弹学院, 陕西 三原 713800;空军工程大学 导弹学院, 陕西 三原 713800;空军工程大学 导弹学院, 陕西 三原 713800
  • 作者简介:宋亚飞(1988—),男,硕士生,研究领域为航空宇航推进理论与工程。E-mail:song_yafei@yahoo.com.cn

Abstract: Numerical simulations of on gas-solid two-phase in axisymmetric shock induction controlled vectoring exhaust nozzle were carried out using particle trajectory model. The simulation results were compared with that under the situation of pure gas. The particle track, parameters in internal flow, as while as the thrust performance were studied when particles diameter changed in the range of 1~30μm. The results showed that the addition of particle phase influenced the internal flow field as well as the thrust characteristic of nozzle. Such influence varied with the diameter of particle. These conclusions are helpful for the experiment on vectoring nozzle.

Key words: Thrust vector; Fluidic thrust vector nozzle; Two-phase flow; Particle trajectory model; Numerical simulation

摘要: 运用颗粒轨道模型对轴对称激波诱导矢量喷管内流场进行了数值模拟,并与纯气相条件下的计算结果进行了对比分析,研究了1~30μm不同直径颗粒的运动轨迹和内流场参数的分布特征,并对矢量喷管的推力性能进行了研究。结果表明,颗粒相的加入对射流推力矢量喷管内流场和推力性能都带来很大影响,影响规律与颗粒直径密切相关。为两相流条件下射流矢量喷管的试验研究提供了一定依据。

关键词: 推力矢量;射流推力矢量喷管;三维两相流;颗粒轨道模型;数值仿真