Investigation of Atomization Characteristics of a Pre-Filmed Ultrasonic Nozzle with Central Rod

Journal of Propulsion Technology ›› 2016, Vol. 37 ›› Issue (6): 1123-1128.

• Combustion , Heat and Mass Transfer • Previous Articles Next Articles

Investigation of Atomization Characteristics of a Pre-Filmed Ultrasonic Nozzle with Central Rod

School of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China,School of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China,School of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China and School of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China

Published:2021-08-15

预膜式杆射哨超声波喷嘴雾化特性研究

武郁文,韩启祥,杨光远,王家骅

南京航空航天大学能源与动力学院，江苏南京 210016,南京航空航天大学能源与动力学院，江苏南京 210016,南京航空航天大学能源与动力学院，江苏南京 210016,南京航空航天大学能源与动力学院，江苏南京 210016

作者简介:武郁文，男，博士生，研究领域为爆震燃烧方面。

Abstract

Abstract: In order to investigate the feasibility of the ultrasonic nozzle used in the pulse detonation engine，a pre-filmed ultrasonic nozzle with central rod was designed，and its atomization characteristics were experimentally investigated with a laser diffraction analyzer and a high-speed camera. Mass flow characteristics，Sauter mean diameter (SMD) and spray angle were obtained. The results indicate that when the nozzle mass flow rate is satisfied，the SMD is about 20μm and the particle size distribution index N is larger than 2. SMD rises with the increase of the fuel pressure differential，and it drops with the increase of air-to-liquid ratio. SMD increases when the distance between the measuring location and the nozzle outlet increases. The atomization quality is the best when distance between the nozzle and the resonator is 15mm. The spray angle rises when the fuel pressure differential increases.

Key words: Ultrasonic nozzle；Atomization characteristics；Mass flow characteristics；Atomization angle；Particle mean diameter

摘要： 为了探索超声波喷嘴应用于脉冲爆震发动机的可行性，设计了一种预膜式杆射哨超声波喷嘴，并采用激光粒度仪和高速相机对其雾化特性进行了实验研究，得到了其流量特性、液滴索太尔平均直径SMD和雾化角度。实验结果表明:在满足喷嘴流量的要求下，平均雾化粒径SMD约为20μm，液滴尺寸分布指数N大于2；SMD随油压差的变大而略有增大，随气液比ALR的增加而减小；随着测点距喷嘴出口的距离变大，SMD增大；共振腔距离喷嘴出口15mm时雾化效果最好；喷雾角度随着油压差的增加而增大。

关键词: 超声波喷嘴；雾化特性；流量特性；喷雾角度；平均粒径

WU Yu-wen,HAN Qi-xiang,YANG Guang-yuan,WANG Jia-hua. Investigation of Atomization Characteristics of a Pre-Filmed Ultrasonic Nozzle with Central Rod[J]. Journal of Propulsion Technology, 2016, 37(6): 1123-1128.

武郁文,韩启祥,杨光远,王家骅. 预膜式杆射哨超声波喷嘴雾化特性研究[J]. 推进技术, 2016, 37(6): 1123-1128.

References

[1] Lefebvre A H. Gas Turbine Combustion[M]. USA: CRC Press, 1998.
[2] 侯晓春, 季鹤鸣, 刘庆国. 高性能航空燃气轮机燃烧技术[M]. 北京:国防工业出版社, 2002.
[3] 甘晓华. 航空燃气轮机燃油喷嘴技术[M]. 北京:国防工业出版社, 2006.
[4] 马大猷, 沈壕. 声学手册[M]. 北京:科学出版社, 2004.
[5] 马其良, 张松寿. 超声波雾化油喷嘴雾化性能的试验研究[J]. 工业炉, 2000, 22(2): 6-7.
[6] 孙晓霞. 超声波雾化喷嘴的研究进展[J]. 工业炉, 2004, 26(1): 19-32.
[7] Hartmann, Construction J. Performance and Design of the Acoustic Air-Jet Generator[J]. Journal of Scientific Instruments, 1939, 16(5).
[8] M?rch K A. A Theory for the Mode of Operation of the Hartmann Air Jet Generator[J]. Journal of Fluid Mechanics, 1964, 20(1): 141-159.
[9] 侯凌云, 侯晓春. 喷嘴技术手册[M]. 北京:中国石化出版社, 2007.
[10] 陈全英, 颜世彪. 杆射哨超声雾化燃烧器的实验研究[J]. 应用声学, 1990, 9(5): 37-41.
[11] 朱永刚, 王兴甫. 超声波喷嘴试验研究[J]. 推进技术, 1997, 18(3): 68-72. (ZHU Yong-gang, WANG Xing-fu. An Experimental Study on Ultrasonic Injection Nozzle[J]. Journal of Propulsion Technology, 1997, 18(3): 68-72.)
[12] 张绍坤. 流体动力式超声波喷嘴的实验研究[D]. 北京:北京工业大学, 2007.
[13] 金义, 何小民, 吴泽俊, 等. 超声波/离心组合喷嘴性能研究[J]. 航空动力学报, 2012, 27(2): 335-342.
[14] Fan W, Yan C, Huang X, et al. Experimental Investigation on Two-Phase Pulse Detonation Engine[J]. Combustion and Flame, 2003, 133(4): 441-450.
[15] 何小民, 王家骅. 气动阀式两相脉冲爆震发动机研究[J]. 航空学报, 2004, 25(6): 529-533.
[16] 李建中, 王家骅, 范育新, 等. 煤油/空气气动阀式脉冲爆震发动机试验[J]. 航空动力学报, 2005, 20(5): 802-806.
[17] Dabora E K, Weinberger L P. Present Status of Detonations in Two-Phase Systems[J]. Acta Astronautica, 1974, 1(3): 361-372.
[18] Kailasanath K. Liquid-Fueled Detonations in Tubes[J]. Journal of Propulsion and Power, 2006, 22(6): 1261-1268.
[19] Dabora E K, Ragland K W, Nicholls J A. Drop-Size Effects in Spray Detonations[J]. Proceedings of the Combustion Institute, 1969, 12(1): 19-26.
[20] 王治武, 严传俊, 李牧, 等. 燃油粒度对两相PDE爆震波速的影响[J]. 工程热物理学报, 2006, 27(6): 1057-1059.
[21] Kailasanath K. Multiphase Detonations in Pulse Detonation Engines-A Status Report[R]. AIAA 2003-4683.
[22] Борисов Ю Я, Гинин B H, Гынкина H M. Разработка и исследование стержневого газоструйного излучателя ГСИ-4[J]. Акустический журнал, 1965, 11(2).
[23] Domann R, Hardalupas Y. Quantitative Measurement of Planar Droplet Sauter Mean Diameter in Sprays Using Planar Droplet Sizing[J]. Particle & Particle Systems Characterization, 2003, 20(3): 209-218.
[24] Rizkalla A A, Lefebvre A H. The Influence of Air and Liquid Properties on Airblast Atomization[J]. Journal of Fluids Engineering, 1975, 97(3): 316-320. 　　　　　　　　　　　　　*　收稿日期:2015-05-19；修订日期:2015-07-02。作者简介:武郁文,男,博士生,研究领域为爆震燃烧方面。E-mail: alexwyw@hotmail.comFig.2　Schematic of experimental system(编辑:张荣莉)

Investigation of Atomization Characteristics of a Pre-Filmed Ultrasonic Nozzle with Central Rod

预膜式杆射哨超声波喷嘴雾化特性研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 0

Recommended Articles

Metrics

Comments