Simulation Study on Vibration Control of Variable
Stiffness Structure with Shape Memory Alloy

Journal of Propulsion Technology ›› 2018, Vol. 39 ›› Issue (6): 1369-1378.

• Structure, Strength and Reliablity • Previous Articles Next Articles

Simulation Study on Vibration Control of Variable Stiffness Structure with Shape Memory Alloy

School of Energy and Power Engineering，Beihang University，Beijing 100191，China;Collaborative Innovation Center of Advanced Aero-Engine，Beijing 100191，China,School of Energy and Power Engineering，Beihang University，Beijing 100191，China and School of Energy and Power Engineering，Beihang University，Beijing 100191，China

Published:2021-08-15

形状记忆合金变刚度结构振动控制仿真研究

洪杰^1,2,郑华强¹,杨鑫¹

北京航空航天大学能源与动力工程学院，北京 100191; 先进航空发动机协同创新中心，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191

Abstract

Abstract: In order to realize the dynamic analysis of the complex structure with shape memory alloy (SMA)Ti50Ni41Cu9 and obtain the mechanism and control law of variable stiffness vibration abatement， the constitutive equation of SMA is established based on the Kelvin-Voigt model. And through compiling the material constitutive program with the ABAQUS， an effective dynamic simulation method is developed to realize the nonlinear steady state and transient dynamic simulation of the SMA structure under the influence of multiple parameters. The calculation results show that the macroscopic constitutive model of SMA can better reflect the dynamic characteristics of the material and the user-defined material mechanical behavior (UMAT) subroutine is in good agreement with the experimental data. The variable stiffness control can effectively reduce the steady-state response caused by constant-frequency excitation， such as a more than 40% decrease of amplitude for cantilever plate and the control rate of the SMA is independent of the final response， but it will cause the non-linear characteristic of the system and affect the time required for the control process. For the transient vibration response through the main frequency， the faster the temperature change rate， the smaller the peak response of the system because spontaneous frequency band induced by rapid temperature change has significant dispersion effect on vibration energy of the main frequency， to some extent， which can inhibit the maximum response peak.

Key words: Shape memory alloy；Constitutive model；Variable stiffness vibration control；Nonlinear vibration；Simulation research

摘要： 为了实现Ti50Ni41Cu9形状记忆合金(SMA)用于复杂结构振动控制的动力学分析，掌握变刚度振动控制的机理和控制规律，基于Kelvin-Voigt粘弹性本构关系，建立了适用于动力学分析的SMA本构模型，并通过ABAQUS编写材料本构程序，形成有效的SMA结构动力学有限元仿真方法，实现了多参数影响下SMA结构的非线性稳态和瞬态动力学仿真计算。计算结果表明:SMA的宏观本构模型能够较好地反映材料动力学性能的变化特征，编制的UMAT子程序与试验数据吻合较好；变刚度控制可以有效降低定频激励引起的稳态响应，对于悬臂板结构响应降幅在40%以上；控制速率与响应的最终变化程度无关，但会引起系统非线性特征，从而影响控制过程需要的时间；采用对向变刚度控制可以降低跨越主频的瞬态振动响应，变温速率越快，系统的峰值响应越小，快速变温时会产生自发频带现象，其对主频能量有显著分散作用，可以一定程度上抑制最大响应峰值。

关键词: 形状记忆合金；本构模型；变刚度振动控制；非线性振动；仿真研究

HONG Jie^1,2,ZHENG Hua-qiang¹,YANG Xin¹. Simulation Study on Vibration Control of Variable Stiffness Structure with Shape Memory Alloy[J]. Journal of Propulsion Technology, 2018, 39(6): 1369-1378.

洪杰,郑华强,杨鑫. 形状记忆合金变刚度结构振动控制仿真研究[J]. 推进技术, 2018, 39(6): 1369-1378.

References

[1] Bil C, Massey K, Abdullah E J. Wing Morphing Control with Shape Memory Alloy Actuators[J]. Journal of Intelligent Material Systems and Structures, 2013, 24(7): 879-898.
[2] Hartl D J, Lagoudas D C. Aerospace Applications of Shape Memory Alloys[J]. Journal of Aerospace Engineering, 2007, 221(4): 535-552.
[3] Mohammad T, Jeng-jong R, Chuh M. Thermal Post-buckling and Aero Elastic Behavior of Shape Memory Alloy Reinforced Plates[J]. Smart Materials and Structures, 2002, 11(2): 297-307.
[4] Kudva J N. Overview of the DARPA Smart Wing Project[J]. Journal of Intelligent Material Systems and Structures, 2004, 15(4): 261-267.
[5] Hartl D J, Lagoudas D C, Calkins F T, et al. Use of a Ni60Ti Shape Memory Alloy for Active Jet Engine Chevron Application: I. Thermomechanical Characterization[J]. Smart Materials and Structures, 2010, 19(1): 15-20.
[6] 任德新, 张大义, 何易峰, 等. 带颗粒型金属橡胶夹层阻尼结构的振动响应研究[J]. 推进技术, 2015, 36(1): 124-129. (REN De-xin, ZHANG Da-yi, HE Yi-feng, et al. Vibration Response Investigation on Structures with Particle Metal Rubber Damper Fillings[J]. Journal of Propulsion Technology, 2015, 36(1): 124-129.)
[7] Dunne J P, Hopkins M A, Baumann E W, et al. Overview of the Sampson Smart Inlet[M]. Los Angeles: SPIE Digital Library, 1999: 380-390.
[8] Caldwell N, Gutmark E, Ruggeri R. Heat Transfer Model for Blade Twist Actuator System[J]. Journal of Thermophysics and Heat Transfer, 2007, 21(2): 352-360.
[9] Hong J, Yan W. Experimental Investigation on the Vibration Tuning of a Shell with a Shape Memory Alloy Ring[J]. Smart Materials & Structures, 2015, 24(10).
[10] 王永军. 含形状记忆合金复合结构振动特性研究[D]. 哈尔滨:哈尔滨工程大学, 2010.
[11] 于平超, 马艳红, 张大义, 等. 具有局部非线性刚度的复杂转子系统动力学模型及振动特性分析[J]. 推进技术, 2016, 37(12): 2343-2351. (YU Ping-chao, MA Yan-hong, ZHANG DA-yi, et al. Dynamic Model and Vibration Characteristic Analysis on Complex Rotor System with Local Nonlinear Stiffness[J]. Journal of Propulsion Technology, 2016, 37(12): 2343-2351.)
[12] Leary M, Schiavone F, Subic A. Lagging for Control of Shape Memory Alloy Actuator Response Time[J]. Material and Design, 2010, 31(4): 2124-2128.
[13] Wang L X, Melnik V N R. Nonlinear Dynamics of Shape Memory Alloy Oscillators in Tuning Structural Vibration Frequencies[J]. Mechatronics, 2012, 22(12): 1085-1096.
[14] Williams A K, Chiu T C G, Bernhard J R. Nonlinear Control of a Shape Memory Alloy Adaptive Tuned Vibration Absorber[J]. Journal of Sound and Vibration, 2005, 288(12): 1131-1155.
[15] Abeyaratne R, Knowles J K. On the Driving Traction Acting on a Surface of Strain Discontinuity in a Continuum[J]. Journal of the Mechanics and Physics of Solids, 1990, 38(3): 345-360.
[16] Ball J M, James R D. Fine Phase Mixtures as Minimizers of Energy[J]. Archive for Rational Mechanics and Analysis, 1987, 100(1): 13-52.
[17] Gao X J, Huang M S, Brinson L C. A Multivariant Micromechanical Model for SMAs Part I: Crystallographic Issues for Single Crystal Model[J]. International Journal of Plasticity, 2000, 16(10-11): 1345-1369.
[18] Huang M S, Gao X J, Brinson L C. A Multivariant Micromechanical Model for SMAs Part II: Polycrystal Model[J]. International Journal of Plasticity, 2000, 16(10-11): 1371-1390.
[19] Bertacchini O W, Lagoudas D C, Patoor E. Thermomechanical Transformation Fatigue of TiNiCu SMA Actuators under a Corrosive Environment, Part I: Experimental Results[J]. International Journal of Fatigue, 2009, 31(10): 1571-1578.
[20] Hartl D J, Solomou A, Lagoudas D C, et al. Phenomenological Modeling of Induced Transformation Anisotropy in Shape Memory Alloy Actuators[C]. San Diego: 2012 SPIE Smart Structures/NDE Conference, 2012, 8342(M).
[21] Auriccchio F, Petrini L. Improvements and Algorithmical Considerations on a Recent Three-Dimensional Model Describing Stress-Induced Solid Phase Transformations[J]. International Journal for Numerical Methods in Engineering, 2002, 55(11): 1255-1284.
[22] Peng X, Pi W, Fan J. A Micro Structure-Based Constitutive Model for the Pseudoelastic Behavior of NiTiSMAs[J]. International Journal of Plasticity, 2008, 24(6): 966-990.
[23] 杨鑫, 洪杰, 马艳红, 等. SMA智能梁结构振动控制试验研究[J]. 航空学报, 2015, 36(7): 2251-2259.
[24] 郭大智, 任瑞波. 层状粘弹性体系力学[M]. 哈尔滨:哈尔滨工业大学出版社, 2001.
[25] 胡梦佳, 李书, 王远达. 主动约束层阻尼板结构动力学建模[J]. 振动、测试与诊断, 2013, 33(s1): 198-201.
[26] 周云. 粘弹性阻尼减震结构设计[M]. 武汉:武汉理工大学出版社, 2006.　　　　　　　　　　　　　*　收稿日期:2017-05-24；修订日期:2017-07-28。通讯作者:洪杰,男,博士,教授,研究领域为航空发动机结构强度、振动与可靠性。E-mail: Hongjie_BUAA@126.com

Simulation Study on Vibration Control of Variable Stiffness Structure with Shape Memory Alloy

形状记忆合金变刚度结构振动控制仿真研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 0

Recommended Articles

Metrics

Comments