AP/Al/CMDB推进剂的断裂特性实验研究

推进技术 ›› 2015, Vol. 36 ›› Issue (11): 1728-1733.

AP/Al/CMDB推进剂的断裂特性实验研究

汪文强^1,2,郑健¹,许进升¹,陈雄¹,周长省¹

南京理工大学机械工程学院，江苏南京 210094; 武汉滨湖电子有限责任公司，湖北武汉 430077,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094

发布日期:2021-08-15
作者简介:汪文强(1988—)，男，硕士生，研究领域为固体火箭发动机装药结构完整性。
基金资助:
总装重点预研项目(20101019)；江苏省自然科学基金(BK20140772)。

Research on Fracture Mechanism of AP/Al/CMDB Propellant

School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China; Wuhan Binhu Electronic Limited Liability Company，Wuhan 430077，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China and School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China

Published:2021-08-15

摘要/Abstract

摘要： 开展了关于AP/Al/CMDB推进剂在2mm/min拉伸速率下的断裂实验研究，利用CCD光学显微镜实时监测了裂纹的起裂与扩展过程，并阐述了裂尖材料的损伤演化机理；结合电镜扫描(SEM)技术对推进剂的断面形貌进行了表征，分析了大粒径高氯酸铵(AP)的微观结构演化机理；采用积分法获得推进剂的断裂能。结果表明:推进剂在起裂与扩展过程中裂尖区域材料存在明显的损伤现象，AP颗粒的脱湿行为主导着微孔洞和微裂纹的萌生、成核、长大、合并过程，表征着推进剂的断裂机理，并控制着推进剂的非线性断裂特性；采用积分法获得推进剂在2mm/min拉伸速率下的断裂能为1.765±0.025N/mm。

关键词: 固体推进剂；损伤；脱湿；断裂能

Abstract: The fracture experiments of AP/Al/CMDB propellant are researched using a constant speed tension under 2 mm/min stretching rate. The CCD optical microscope is used to monitor the process of the initial fracture and propagating. The damage evolution mechanism of the material near crack tip is elaborated. Scanning electron microscope is applied to characterize the fracture morphology of the propellant. Moreover，the large particle size ammonium perchlorates (AP) microstructure evolution mechanism is also analyzed in detail. The?fracture?energy is obtained by the method of numerical integration. Results show that a typical damage phenomenon is found in the process of crack tip and the propagation path. The AP particles de-wetting behavior dominates the process of the micro holes and micro crack initiation，nucleation，growth，merging，which characterize the propellant fracture mechanism and controlls the nonlinear fracture characteristics of the propellant. The fracture energy obtained by the numerical integral method is 1.765±0.025N/mm under 2mm/min stretching rate.

Key words: Solid propellant；Damage；De-wetting；Fracture energy

汪文强,郑健,许进升,陈雄,周长省. AP/Al/CMDB推进剂的断裂特性实验研究[J]. 推进技术, 2015, 36(11): 1728-1733.

WANG Wen-qiang^1,2,ZHENG Jian¹,XU Jin-sheng¹,CHEN Xiong¹,ZHOU Chang-sheng¹. Research on Fracture Mechanism of AP/Al/CMDB Propellant[J]. Journal of Propulsion Technology, 2015, 36(11): 1728-1733.

参考文献

[1] 韩小云, 周建平. 固体推进剂燃烧断裂边界二维流场特性[J].推进技术, 1998, 19(6): 20-23.(HAN Xiao-yun, ZHOU Jian-ping. Characteristics of 2D Flow Fields on Combustion Fracture Boundary in Solid Propellant [J]. Journal of Propulsion Technology, 1998, 19(6): 20-23.)
[2] 刘朝丰, 陈飞, 阳建红. 固体推进剂断裂韧性试验方法研究[J]. 宇航学报, 2007, 27(B12): 186-189.
[3] 常新龙, 余堰峰, 张有宏, 等. HTPB推进剂老化断裂性能试验[J].推进技术, 2011, 32(4): 564-568. (CHANG Xin-long, YU Yan-feng, ZHANG You-hong, et al. Test on Aging Fracture Properties of HTPB Propellant[J]. Journal of Propulsion Technology, 2011, 32(4): 564-568.)
[4] 曾甲牙. 丁羟推进剂拉伸断裂行为的扫描电镜研究[J]. 固体火箭技术, 1999, 22(4): 69-72.
[5] 蒙上阳, 唐国金, 雷勇军. 固体发动机药柱的裂纹稳定性分析[J]. 推进技术, 2002, 23(4): 335-338. (MENG Shang-yang, TANG Guo-jin, LEI Yong-jun. Stability Analysis of the Crack in Solid Rocket Motor Grain [J]. Journal of Propulsion Technology, 2002, 23 (4): 335-338.)
[6] 蒙上阳, 胡光宇, 刘兵, 等. 固体火箭发动机药柱裂纹的J积分分析[J]. 固体火箭技术, 2011, 33(6): 646-649.
[7] Ide K M, Ho S Y, Williams D R G. Fracture Behavior of Accelerated Aged Solid Rocket Propellants[J]. Journal of Materials Science, 1999, 34(17): 4209-4218.
[8] Knauss W G. Fracture and Failure at and Near Interfaces under Pressure[R]. AD-A348939, 1998.
[9] Ho S Y, Fong C W. Correlation between Fracture Properties and Dynamic Mechanical Relaxations in Composite Propellants[J]. Polymer, 1987, 28(5): 739-744.
[10] Ho S Y, Fong C W. Temperature Dependence of High Strain-Rate Impact Fracture Behavior in Highly Filled Polymeric Composite and Plasticized Thermoplastic Propellants [J]. Journal of Materials Science, 1987, 22(8): 3023-3031.
[11] Tussiwand G S, Saouma V, Terzenbach R, et al. Fracture Mechanics of Composite Solid Rocket Propellant Grains: Material Testing[J]. Journal of Propulsion and Power, 2009, 25(1): 60-73.
[12] Abdelaziz M N, Neviere R, Pluvinage G. Experimental Investigation of Fracture Surface Energy of a Solid Propellant under Different Loading Rates[J]. Engineering Fracture Mechanics, 1988, 31(6): 1009-1026.
[13] 王自强, 陈少华. 高等断裂力学[M]. 北京:科学出版社, 2009.
[14] GJB770B-2005 G. 火药试验方法[S]. 北京:国防科工委军标出版发行部, 2005.
[15] 庄茁, 蒋持平. 工程断裂与损伤[M]. 北京:机械工业出版社, 2004.
[16] Ramorino G, Agnelli S, De Santis R, et al. Investigation of Fracture Resistance of Natural Rubber/Clay Nanocomposites by J-testing[J]. Engineering Fracture Mechanics, 2010, 77(10): 1527-1536.(编辑:张荣莉)　　　　　　　　　　　　　*　收稿日期:2014-09-17；修订日期:2015-01-12。基金项目:总装重点预研项目(20101019)；江苏省自然科学基金(BK20140772)。作者简介:汪文强(1988—),男,硕士生,研究领域为固体火箭发动机装药结构完整性。E-mail: 18705161879@139.com