无旋锥形液膜表面波不稳定性试验研究

推进技术 ›› 2016, Vol. 37 ›› Issue (10): 1893-1899.

无旋锥形液膜表面波不稳定性试验研究

方昕昕,沈赤兵,康忠涛

国防科技大学高超声速冲压发动机技术重点实验室，湖南长沙 410073,国防科技大学高超声速冲压发动机技术重点实验室，湖南长沙 410073,国防科技大学高超声速冲压发动机技术重点实验室，湖南长沙 410073

发布日期:2021-08-15
作者简介:方昕昕，男，硕士生，研究领域为火箭发动机及其组合推进技术。
基金资助:
国防科技大学2015年度优秀研究生创新资助项目(S150105)。

Experimental Research of Instability of Surface

Science and Technology on Scramjet Laboratory，National University of Defense Technology，Changsha 410073，China,Science and Technology on Scramjet Laboratory，National University of Defense Technology，Changsha 410073，China and Science and Technology on Scramjet Laboratory，National University of Defense Technology，Changsha 410073，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究针栓式喷注器无旋锥形液膜表面波不稳定特性，采用高速摄影获得了不同压降下表面波波动图像，测量了液膜表面波破碎点波长、振幅以及破碎长度等特征信息。利用试验结果修正了无旋锥形液膜色散方程中的参数[C]和[ln(ηbη0)]，并求解了色散方程。研究了喷注压降对液膜破碎长度、破碎时间以及破碎点波长的影响。结果表明:随着喷注压降的增加，液膜破碎长度和破碎时间均降低，并且降低趋势越来越缓，液膜表面波发展的非线性增强，理论值与试验值的偏差由3.9%增大到29.2%；液膜破碎位置处扰动波长随喷注压降的增加而降低，并且试验值比理论值偏大50%左右，无旋锥形液膜破碎模型可定性分析针栓式喷注器液膜表面波不稳定性。

关键词: 针栓式喷注器；锥形液膜；色散方程；破碎长度

Abstract: To study instability characteristics of surface wave on irrotational conical sheets of pintle injectors，fragmenting images in different injection pressure drop were obtained using high-speed photography. And feature information，like surface wave length at the breakup point，wave amplitude，and breakup length，were measured. Then，after modifying the parameters[C]and [ln(ηbη0)] in the dispersion equations using the experimental data，the equations were solved. Effects of injection pressure drop on breakup length，breakup time and wave length at the breakup point were studied. The results indicate that both the breakup length and breakup time decrease with increasing of the injection pressure drop，and the decreasing tendency becomes slow. In addition，the deviation between theoretical data and experimental data increases from 3.9% to 29.2% because the developing nonlinearity of the surface wave of conical sheets enhances. Surface wave length at the breakup point reduces as the injection pressure drop rises，and the experimental data is 50% bigger than the theoretical data. The breaking model of irrotational conical sheets can be used to qualitatively analyse instability of surface wave of pintle injectors.

Key words: Pintle injector；Conical sheets；Dispersion equation；Breakup length

方昕昕,沈赤兵,康忠涛. 无旋锥形液膜表面波不稳定性试验研究[J]. 推进技术, 2016, 37(10): 1893-1899.

FANG Xin-xin,SHEN Chi-bing,KANG Zhong-tao. Experimental Research of Instability of Surface[J]. Journal of Propulsion Technology, 2016, 37(10): 1893-1899.

参考文献

[1] 岳春国, 李进贤, 杨姝君. 变推力液体火箭发动机系统研究[C]. 北京:中国宇航学会深空探测技术专业委员会第二届学术会议, 2005.
[2] 张育林. 变推力液体火箭发动机及其控制技术[M]. 北京:国防工业出版社, 2001.
[3] Dressler G A, Bauer J M. TRW Pintle Engine Heritage and Performance Characteristics[R]. AIAA 2000-3871.
[4] Marchi A, Nouri J, Yan Y, et al. Spray Stability of Outwards Opening Pintle Injectors for Stratified Direct Injection Spark Ignition Engine Operation[J]. International Journal of Engine Research, 2010, 11(6): 413-437.
[5] Nouri J M, Hamid M A, Yan Y, et al. Spray Characterization of a Piezo Pintle-Type Injector for Gasoline Direct Injection Engines[J]. Journal of Physics: Conference Series, 2007, 85(1): 281-292.
[6] Quan Dong, Tsuneaki Ishima, Hisanobu Kawashima. A Study on the Spray Characteristics of a Piezo Pintle-Type Injector for DI Gasoline Engines[J]. Journal of Mechanical Science and Technology, 2013, 27(7): 1981-1993.
[7] Min Son, Kijeong Yu, Jaye Koo, et al. Effects of Momentum Ratio and Weber Number on Spray Half Angles of Liquid Controlled Pintle Injector[J]. Journal of Thermal Science, 2015, 24(1): 37-43.
[8] Gavaises M, Tonini1 S, Marchi1 A. Modelling of Internal and Near-Nozzle Flow of a Pintle-Type Outwards-Opening Gasoline Piezo-Injector[J]. International Journal of Engine Research, 2006, 7: 381-397.
[9] Nouri J M, Abo-Serie E, Marchi A, et al. Internal and Near Nozzle Flow Characteristics in an Enlarged Model of an Outwards Opening Pintle-Type Gasoline Injector[J]. Journal of Physics: Conference Series, 2007, 85(1): 256-267.
[10] Crapper G D, Dombrowski N. Kelvin-Helmholtz Wave Growth on Cylindrical Sheets[J]. Journal of Fluid Mechanics, 1975, 68(3): 497-502.
[11] Sterling Arthur M, Sleicher C A. The Instability of Capillary Jets[J]. Journal of Fluid Mechanics, 1975, 68:477-495.
[12] Ibrahim A A. Comprehensive Study of Internal Flow Field and Linear and Nonlinear Instability of an Annular Liquid Sheet Emanating from an Atomizer[D]. Cincinnati: University of Cincinnati, 2006.
[13] Panchagnula M V. Stability of Annular Liquid Sheets[D]. West Lafayette: Purdue University, 1998.
[14] John Tharakan T, Ramamurthi K. Experimental Study of Liquid Sheets Formed in Coaxial Swirl Injectors[J]. Journal of Propulsion and Power, 1995, 11(6): 1103-1109.
[15] Santolaya J L, Aisa L A, Garcia E. Experimental Study of Near Field Flow Structure in Hollow Cone Pressure Swirl Sprays[J]. Journal of Propulsion and Power, 2007, 23(2): 382-389.
[16] Reddy K U, Mishra D P. Studies on Spray Behavior of a Pressure Swirl Atomizer in Transition Regime[J]. Journal of Propulsion and Power, 2008, 24 (1): 74-80.
[17] Briffa F E J, Dombrowski N. Entrainment of Air into a Liquid Spray[J]. American Institute of Chemical Engineers Journal, 1966, 12(4): 708-717.
[18] Dombrowski N, Hooper P C. The Effect of Ambient Density on Drop Formation in Sprays[J]. Chemical Engineering Science, 1962, 17(4): 291-305.
[19] David P Schmidt, Idriss Nouar, Senecal P K. Pressure-Swirl Atomization in the Near Field[J]. Journal of Engines, 1999, 108(3): 471-484.
[20] 岳明. 锥形液膜初始破碎雾化过程和机理研究[D]. 北京:北京航空航天大学, 2003.
[21] Crapper G D, Dombrowski N, et al. Kelvin-Helmholtz Wave Growth in Cylindric Sheets[J]. Journal of Fluid Mechanics, 1975, 168(3): 497-502.
[22] 岳明, 杨茂林. 锥形液膜空间稳定性分析[J]. 航空动力学报, 2003, 18(6): 794-798.
[23] 周猛, 庄逢辰. 喷注器出口附近液膜运动及破碎过程的理论分析[J]. 推进技术, 1993, 2: 34-39. (ZHOU Meng, ZHUANG Feng-chen. Theoretic Analysis of Liquid Film Movment and its Disintegration Near the Orifice of Atomizer[J]. Journal of Propulsion Technology, 1993, 2: 34-39.)
[24] 刘娟, 李清廉, 刘卫东, 等. 离心式喷嘴液膜破碎过程实验[J]. 推进技术, 2011, 32(4): 539-543. (LIU Juan, LI Qing-lian, LIU Wei-dong, et al. Experiment on Liquid Sheet Breakup Process of Pressure Swirl Injector[J]. Journal of Propulsion Technology, 2011, 32(4): 539-543.)
[25] Inamura T, Tamura H, Sakamoto H. Characteristics of Liquid Film and Spray Injected from Swirl Coaxial Injector[J]. Journal of Propulsion and Power, 2003, 19(4):632-639.
[26] 李继保, 岳明, 杨茂林. 锥形液膜Kevin-Helmholtz波不稳定性的试验研究[J]. 航空动力学报, 2007, 22(3): 337-341.
[27] 何志勇, 孙立宁, 陈立国. Otsu准则下分割阈值的快速计算[J]. 电子学报, 2013, 41(2): 267-272.
[28] 富庆飞. 液体火箭发动机同轴喷嘴稳/动态特性分析[D]. 北京:北京航空航天大学, 2013.
[29] Kim D, Im J, Koh H, et al. Effect of Ambient Gas Density on Spray Characteristics of Swirling Liquid Sheets[J]. Journal of Propulsion and Power, 2007, 23(3): 603-611.
[30] Kim D, Han P, Im J, et al. Effect of Recess on the Spray Characteristics of Liquid-Liquid Swirl Coaxial Injectors[J]. Journal of Propulsion and Power, 2007, 3(6): 1194-1203.
[31] YUE Ming, XU Hang. Study on Breakup of Conical Liquid Sheet under Varying Flow Conditions[J]. Chinese Journal of Aeronautics, 2003, 16(1): 12-14.　　　　　　　　　　　　　*　收稿日期:2015-05-19；修订日期:2015-07-01。基金项目:国防科技大学2015年度优秀研究生创新资助项目(S150105)。作者简介:方昕昕,男,硕士生,研究领域为火箭发动机及其组合推进技术。E-mail: hitfangxinxin@163.com(编辑:朱立影)