篦齿封严尺寸缩放与气流温度变化对流动与传热影响试验研究

推进技术 ›› 2016, Vol. 37 ›› Issue (2): 304-310.

篦齿封严尺寸缩放与气流温度变化对流动与传热影响试验研究

张勃¹,吉洪湖¹,杜发青¹,陆海鹰²,邓明春²

南京航空航天大学能源与动力学院，江苏省航空动力系统重点实验室，江苏南京 210016,南京航空航天大学能源与动力学院，江苏省航空动力系统重点实验室，江苏南京 210016,南京航空航天大学能源与动力学院，江苏省航空动力系统重点实验室，江苏南京 210016,沈阳发动机设计研究所，辽宁沈阳 110015,沈阳发动机设计研究所，辽宁沈阳 110015

发布日期:2021-08-15
作者简介:张勃，男，博士，副教授，研究领域为流动密封、红外抑制。

Experimental Investigation of Scaling and Temperature Effects on Flowing and Heat Transfer Characteristics in Labyrinth Seals

Nanjing University of Aeronautics and Astronautics，Jiangsu Province Key Laboratory of Aerospace Power System，Nanjing 210016，China,Nanjing University of Aeronautics and Astronautics，Jiangsu Province Key Laboratory of Aerospace Power System，Nanjing 210016，China,Nanjing University of Aeronautics and Astronautics，Jiangsu Province Key Laboratory of Aerospace Power System，Nanjing 210016，China,Shenyang Aero engine Research Institute，Shenyang 110015，China and Shenyang Aero engine Research Institute，Shenyang 110015，China

Published:2021-08-15

摘要/Abstract

摘要： 利用矩形、梯形齿篦齿封严直通齿模型，将真实尺寸篦齿封严等比例放大，对真实尺寸模型与放大模型的流动与换热特征进行了试验研究与对比分析，并研究了气流温度变化对流量系数的影响。研究发现，放大模型与真实尺寸模型的流量系数与努赛尔数均随雷诺数增大而增大，在雷诺数相同时两者的流量系数与努赛尔数基本相等，最大差值分别为5.3%和9.7%。放大模型较好地保持了真实尺寸篦齿封严狭小空间流动与换热特征。研究还发现，在加热条件下，流量系数相比冷态条件下有所减小。

关键词: 篦齿封严；尺寸缩放；流量系数；换热特性；温度变化

Abstract: Based on the real labyrinth seals，the rectangular and trapezium scaling models were designed by exemplifying the original ones by times. The flow and heat transfer characteristics of the scaling and original seals were experimentally investigated and compared，in the same time，the effect of temperature on flow efficiency was investigated. The results showed，the flowing efficiency and Nusselt number of the original and scaling models all increase with Renaults number，and have the similar values，the largest difference of flowing and heat transfer efficiency between the scaling and original models are 5.3% and 9.7%，respectively. It can be concluded that the scaling models keep the same flow and heat transfer characteristics formed in small gaps of the original seals. It was also found that flowing efficiency decreased with gas temperature rising.

Key words: Labyrinth seal；Scaling model；Flow efficiency；Heat transfer characteristics；Changing of temperature

张勃,吉洪湖,杜发青,陆海鹰,邓明春. 篦齿封严尺寸缩放与气流温度变化对流动与传热影响试验研究[J]. 推进技术, 2016, 37(2): 304-310.

ZHANG Bo¹,JI Hong-hu¹,DU Fa-qing¹,LU Hai-ying²,DENG Ming-chun². Experimental Investigation of Scaling and Temperature Effects on Flowing and Heat Transfer Characteristics in Labyrinth Seals[J]. Journal of Propulsion Technology, 2016, 37(2): 304-310.

参考文献

[1] 刘卫华, 林丽, 朱高涛. 迷宫密封激励的研究现状及其展望[J]. 流体机械, 2007, 35 (2): 35-39.
[2] Demko J A, Morrison G L, Rhode D L. Effect of Shaft Rotation on the Incompressible Flow in a Labyrinth Seal[J]. Journal of Propulsion and Power, 1990, 6 (2):171-176.
[3] Delgado I R, Proctor M P. A Review of Engine Seal Performance and Requirements for Current and Future Army Engine Platforms[R]. AIAA 2007-5734.
[4] Bruce M Steinetz. Engine Seal Technology Requirements to Meet NASA Advanced Subsonic Technolgy Program Goals[J]. Journal of Propulsion and Power, 1996, 12(4):786-793.
[5] 航空发动机手册编写组.航空发动机手册[M]. 北京:航空工业出版社, 2000.
[6] 陈光. 航空发动机结构设计分析[M]. 北京:北京航空航天大学出版社, 2006.
[7] 张霞, 张效伟, 朱惠人, 等. 直通型篦齿封严特性的试验[J]. 航空动力学报, 2010, 25(8): 1753-1757.
[8] 吴丁毅. 直通式篦齿封严特性的实验研究[J]. 推进技术, 1997, 18(3), 79-81. (WU Ding-yi. An Experimental Investigation on Seal Character of Straight Through Labyrinth[J]. Journal of Propulsion Technology, 1997, 18(3): 79-81.)
[9] 刘振侠, 赵海刚, 张丽芬, 等. 静态封严篦齿内部流动与换热的数值计算[J]. 航空动力学报, 2008, 23(3): 448-453.
[10] 王鹏飞, 郭文, 刘玉芳, 等. 直通式篦齿封严特性的数值分析和试验研究[J]. 燃气涡轮试验与研究, 2009, (1): 32-36.
[11] 黄晓光, 吴丁毅. 直通式篦齿封严篦齿内部流动和换热的试验研究[J]. 推进技术, 1999, 20 (5):80-85. (HUANG Xiao-guang, WU Ding-yi. Design of Experiment Platform and Investigation of Flow Field and Heat Transfer in Straight Labyrinth Seal[J]. Journal of Propulsion Technology, 1999, 20(5): 80-85.)
[12] 胡东旭, 贾力, 杨立新. 篦齿封严泄漏特性的实验 [J]. 航空动力学报, 2014, 29(3): 549-555.
[13] 杜发青, 吉洪湖, 帅海山, 等. 齿形几何参数对直通篦齿封严泄漏特性影响的正交试验[J]. 航空动力学报, 2013, 28(4): 825-831.
[14] 张勃, 吉洪湖, 杜发青, 等. 基于正交法的直通篦齿封严齿形几何参数对换热特性影响的试验研究[J]. 机械工程学报, 2013, 49(4): 135-139.
[15] Wittig S L K, Dorr L, Kim S. Scaling Effects on Leakage Losses in Labyrinth Seals[J]. Journal of Engineering for Power, 1983, 105(2): 305-309. (编辑:朱立影)　　　　　　　　　　　　　*　收稿日期:2014-10-08；修订日期:2015-01-05。作者简介:张勃,男,博士,副教授,研究领域为流动密封、红外抑制。E-mail: zhangbo_pe@nuaa.edu.cn