预旋结构影响带盖盘预旋系统流动的实验

推进技术 ›› 2017, Vol. 38 ›› Issue (8): 1826-1832.

预旋结构影响带盖盘预旋系统流动的实验

孙占东¹,罗翔¹,黄由之¹,周志翔²,廖乃兵²

北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191,中国航空动力机械研究所，湖南株洲 412002,中国航空动力机械研究所，湖南株洲 412002

发布日期:2021-08-15
作者简介:孙占东，男，硕士生，研究领域为旋转盘腔流动与换热。

Experiment of Flow of a Cover-Plate Preswirl System Influenced by Preswirl Structrue

School of Energy and Power Engineering，Beijing University of Aeronautics and Astronautics，Beijing 100191，China,School of Energy and Power Engineering，Beijing University of Aeronautics and Astronautics，Beijing 100191，China,School of Energy and Power Engineering，Beijing University of Aeronautics and Astronautics，Beijing 100191，China,AVIC Aviation Powerplant Research Institute，Zhuzhou 412002，China and AVIC Aviation Powerplant Research Institute，Zhuzhou 412002，China

Published:2021-08-15

摘要/Abstract

摘要： 为探究预旋结构如何影响盖盘系统内的流动特性，对不同预旋角度和进气位置的带盖盘预旋系统进行实验研究，得到了高转速下静盘表面静压和中心面总压的分布、中心面旋流系数、预旋孔排气系数以及腔内流阻系数。结果表明:预旋角度和进气位置分别影响腔内压力分布大小和分布趋势。随预旋比增加中心面旋流系数整体增加，转静腔内旋流系数与无量纲半径的-2次幂存在线性关系。预旋孔排气系数随预旋孔进出口压比的增加而增加。流阻系数随湍流参数增大而上升，随旋转雷诺数的增加而减小。

关键词: 盖盘；预旋角度；进气位置；转静腔；预旋腔；流动

Abstract: For the results that how preswirl structure influences the flow characteristics of a coverplate system，the experiment has been carried out for different pre-swirl angles and inlet positions of a cover-plate system. Static pressure distribution on the stator，total pressure distribution and swirl ratio on the mid plane，the discharge coefficient of pre-nozzle and the flow resistance coefficient in cavity were obtained under high rotating speeds. The results show that the pressure values and pressure distributions in the cavity are affected by pre-swirl angles and inlet positions，respectively. Swirl ratio on the mid plane increases with pre-swirl ratio increasing，and there being a linear variation between swirl ratio and dimensionless radius -2 powers in rotor-stator cavity. The discharge coefficient of pre-swirl nozzle increases with the increase of pressure ratio. The flow resistance coefficient increases with the turbulent flow parameter increasing，and decreases as rotational Reynolds number increasing.

Key words: Cover-plate；Pre-swirl angle；Inlet position；Rotor-stator system；Pre-swirl cavity；Flow

孙占东,罗翔,黄由之,周志翔,廖乃兵. 预旋结构影响带盖盘预旋系统流动的实验[J]. 推进技术, 2017, 38(8): 1826-1832.

SUN Zhan-dong¹,LUO Xiang¹,HUANG You-zhi¹,ZHOU Zhi-xiang²,LIAO Nai-bing². Experiment of Flow of a Cover-Plate Preswirl System Influenced by Preswirl Structrue[J]. Journal of Propulsion Technology, 2017, 38(8): 1826-1832.

参考文献

[1] Popp O, Zimmerman H, Kutz J, et al. CFD Analysis of Cover-Plate Receiver Flow[R]. ASME 96-GT-357.
[2] Karabay H, Chen J X, Pilbrow R, et al. Flow in a "Cover-Plate" Pre-Swirl Rotor-Stator System[R]. ASME 97-GT-243.
[3] Pilbrow R, Karabay H, Wilson M, et al. Heat Transfer in a "Cover-Plate" Pre-Swirl Rotating Disc System [R].ASME 98-GT-113.
[4] Chew J W, Hills N J, Khalatov S, et al. Measurement and Analysis of Flow in a Pre-Swirled Cooling Air Delivery System[R]. ASME GT 2003-38084.
[5] Yan Y, Gord M F, Lock G D, et al. Fluid Dynamics of a Pre-Swirl Rotor-Stator System [J]. Journal of Turbomachinery, 2003, 125(4): 805-813.
[6] Lewis Paul, Wilson Michael, Lock Gary, et al. Effect of Radial Location of Nozzles on Performance of Pre-Swirl Systems[J]. Journal of Power and Energy, 2009, 223(2): 179-190.
[7] El-Oun Z B, Owen J M. Preswirl Blade-Cooling Effectiveness in an Adiabatic Rotor-Stator System[J]. Journal of Turbomachinery, 1989, (111): 522-529.
[8] Javiya U, Chew J, Hills N, et al. CFD Analysis of Flow and Heat Transfer in a Direct Transfer Pre-Swirl System [R]. ASME GT 2010-22964.
[9] 朱晓华, 刘高文, 刘松龄, 等. 带盖板的预旋系统温降和压力损失数值研究[J]. 航空动力学报, 2010, 25(11): 2498-2506.
[10] 何振威, 冯青, 刘松龄, 等. 带盖板预旋系统的流动实验[J]. 推进技术, 2011, 32(5): 654-657. (HE Zhen-wei, FENG Qing, LIU Song-ling, et al. Experiment of the Flow in a Cover-Plate Pre-Swirl System [J].Journal of Propulsion Technology, 2011, 32(5): 654-657.)
[11] 蔡旭, 徐国强, 罗翔, 等. 直接供气预旋转静系流动特性的实验[J]. 航空动力学报, 2012, 27(10):2222-2228.
[12] 王锁芳, 朱强华, 张羽, 等. 预旋进气位置对转静盘腔换热影响的数值研究[J]. 航空动力学报, 2007, 22(8): 1227-1232.
[13] 刘高文, 李碧云, 蒋兆午, 等. 预旋角度对预旋孔流动特性的影响[J]. 推进技术, 2012, 33(5): 740-746. (LIU Gao-wen, LI Bi-yun, JIANG Zhao-wu, et al. Effects of Pre-Swirl Angle on Flow Characteristics of Pre-Swirl Nozzle[J]. Journal of Propulsion Technology, 2012, 33(5): 740-746.)
[14] 罗翔, 徐国强, 陶智, 等. 进气角度对旋转盘冷却效果的影响[J]. 推进技术, 2007, 28(3): 240-243. (LUO Xiang, XU Guo-qiang, TAO Zhi, et al. Cooling Effectiveness in a Rotor-Stator System with Different Pre-Swirl Angles [J]. Journal of Propulsion Technology, 2007, 28(3): 240-243.)
[15] 罗翔, 徐国强, 陶智, 等. 30°预旋进气旋转盘流动与换热特性的实验[J]. 北京航空航天大学学报, 2007, 33(3): 290-293.　　　　　　　　　　　　　　收稿日期:2016-04-22；修订日期:2016-06-22。作者简介:孙占东,男,硕士生,研究领域为旋转盘腔流动与换热。E-mail: 748504929@qq.com(编辑:梅瑛)