基于SIFT算法的含碳颗粒凝胶推进剂雾化场速度分析

推进技术 ›› 2018, Vol. 39 ›› Issue (1): 203-211.

基于SIFT算法的含碳颗粒凝胶推进剂雾化场速度分析

石超¹,强洪夫¹,刘虎²,付幼明³

火箭军工程大学动力工程系，陕西西安 710025,火箭军工程大学动力工程系，陕西西安 710025,火箭军工程大学青州士官学院，山东青州 262500,西安航天动力研究所，陕西西安 710100

发布日期:2021-08-15
作者简介:石超，男，博士生，研究领域为喷雾燃烧与SPH数值仿真。
基金资助:
国家自然科学基金(51276192)。

Analysis of Atomization Field Velocity of Carbon-Loaded Gelled Propellants Based on SIFT Algorithm

Department of Power Engineering，Rocket Force University of Engineering，Xi’an 710025，China,Department of Power Engineering，Rocket Force University of Engineering，Xi’an 710025，China,Non-Commissioned Officer Institute，Rocket Force University of Engineering，Qingzhou 262500，China and Xi’an Aerospace Propulsion Institute，Xi’an 710100，China

Published:2021-08-15

摘要/Abstract

摘要： 雾化是凝胶推进技术的关键问题之一，雾化过程中的液膜、液丝及液滴等的速度分布、液膜厚度等参数对于判断雾化效果、揭示雾化机理具有重要作用。为了对含碳颗粒凝胶推进剂雾化场的速度进行定量分析，提出了一种基于SIFT关键点匹配的雾化场速度计算方法，并以雾化场速度分析为基础，提出了一种新的液膜厚度估算方法。结果表明:雾化场速度随射流速度的增大而增大，随撞击角度的增大而减小；雾化场平均速度与射流速度的比值[vato/vjet]在0.6～0.9，可用于表征雾化效果，[vato/vjet]越小，雾化效果越好；射流撞击形成液膜的厚度在0.04～0.13mm，液膜厚度随着射流速度及撞击角度的增大而减小；凝胶推进剂的雾化效果随着碳颗粒浓度的增大而降低，随着碳颗粒粒径的增大而略有改善。

关键词: 凝胶推进剂；碳颗粒；雾化场速度；SIFT算法

Abstract: Atomization is one of the key problems in gel propulsion technology， and the velocity distribution of liquid sheets， liquid filaments or droplets and the liquid sheet thickness play an important role in judging the atomization effect and revealing the atomization mechanism. In order to quantitatively analyze the atomization field velocity of carbon-loaded gelled propellants， a method of atomization field velocity calculation was proposed， which was based on the SIFT key points of atomization images， and a new liquid sheet thickness estimation method was put forward. The results show that atomization field velocity increases with jet velocity， and decreases with the increase of impact angle; the ratio of atomization average velocity to jet velocity[vato/vjet] can be used to characterize the atomization effect， which is between 0.6～0.9， the smaller the [vato/vjet]is， the better is the atomization effect; the thickness of liquid sheet formed by impinging jet is between 0.04～0.13mm， and the liquid sheet thickness decreases with the increase of jet velocity and impact angle; the atomization effect can be weakened as the mass fraction of carbon particles increases and slightly improved as the average radius of carbon particles increases.

Key words: Gelled propellants；Carbon particles；Atomization field velocity；SIFT algorithm

石超,强洪夫,刘虎,付幼明. 基于SIFT算法的含碳颗粒凝胶推进剂雾化场速度分析[J]. 推进技术, 2018, 39(1): 203-211.

SHI Chao¹,QIANG Hong-fu¹,LIU Hu²,FU You-ming³. Analysis of Atomization Field Velocity of Carbon-Loaded Gelled Propellants Based on SIFT Algorithm[J]. Journal of Propulsion Technology, 2018, 39(1): 203-211.

参考文献

[1] Hodge K, Crofoot T, Nelson S. Gelled Propellants for Tactical Missile Applications[R]. AIAA 99-2976.
[2] 刘虎, 强洪夫, 韩亚伟, 等. 幂律型凝胶推进剂射流撞击雾化SPH模拟[J]. 推进技术, 2015, 36(9): 1416-1425. (LIU Hu, QIANG Hong-fu, HAN Ya-wei, et al. SPH Simulation of Atomization Characteristics of Power-Law Gelled Propellant Formed by Two Impinging Jets[J]. Journal of Propulsion Technology, 2015, 36(9): 1416-1425.)
[3] Natan B, Rahimi S. The Status of Gel Propellants in Year 2000[J]. International Journal of Energetic Materials and Chemical Propulsion, 2002, 5(1-6): 172-192.
[4] Jayaprakash N, Chakravarthy S R. Impingement Atomization of Gelled Fuels[R]. AIAA 2003-316.
[5] Von Kampen J, Alberio F, Ciezki H K. Spray and Combustion Characteristics of Aluminized Gelled Fuels with an Impinging Jet Injector[J]. Aerospace Science and Technology, 2007, 11: 77-83.
[6] Baek G, Kim S, Han J, et al. Atomization Characteristics of Impinging Jets of Gel Material Containing Nanoparticles[J]. Journal of Non-Newtonian Fluid Mechanics, 2011, 166(21): 1272-1285.
[7] 张蒙正, 李军, 陈炜, 等. 互击式喷嘴燃烧室燃烧效率实验[J]. 推进技术, 2012, 33(1): 54-57. (ZHANG Meng-zheng, LI Jun, CHEN Wei, et al. Experiments on Combustion Efficiency for Impinging Injector Chamber[J]. Journal of Propulsion Technology, 2012, 33(1): 54-57.)
[8] Rodrigues N S, Sojka P E. A Parametric Investigation of Gelled Propellant Spray Characteristics Utilizing Impinging Jet Geometry[R]. AIAA 2014-1184.
[9] 陈杰, 封锋, 马虎, 等. 基于PIV的凝胶模拟液撞击雾化速度场实验研究[J]. 推进技术, 2014, 35(4): 565-569. (CHEN Jie, FENG Feng, MA Hu, et al. Experimental Study on Impinging Velocimetry of Gel Stimulants Based on PIV[J]. Journal of Propulsion Technology, 2014, 35(4): 565-569.)
[10] Arienti M, Li X, Soteriou M C, et al. Coupled Level-Set/Volume-of Fluid Method for the Simulation in Propulsion Device Injectors[R]. AIAA 2010-7136.
[11] Ma D J, Chen X D, Khare P, et al. Atomization Patterns and Breakup Characteristics of Liquid Sheets Formed by Two Impinging Jets[R]. AIAA 2011-97.
[12] 强洪夫, 韩亚伟, 王广, 等. 幂律型流体雾化SPH方法数值分析[J]. 推进技术, 2013, 34(2): 240-247. (QIANG Hong-fu, HAN Ya-wei, WANG Guang, et al. Numerical Analysis of Atomization Process of Liquid with Power Law Model Based on SPH Method[J]. Journal of Propulsion Technology, 2013, 34( 2): 240-247.)
[13] Lowe D G. Object Recognition from Local Scale-Invariant Features[C]. Kerkyra: Proceedings of the 7th IEEE International Conference on Computer Vision, 1999.
[14] Lowe D G. Distinctive Image Features from Scale-Invariant Keypoints[J]. International Journal of Computer Vision, 2004, 60(2): 91-110.
[15] 王梅, 屠大维, 周许超. SIFT特征匹配和差分相乘融合的运动目标检测[J]. 光学精密工程, 2011, 19(4): 892-899.
[16] Heislbetz B, Madlener K, Ciezki H K. Breakup Characteristics of a Newtonian Liquid Sheet Formed by a Doublet Impinging Jet Injector[R]. AIAA 2007-5694.
[17] 张蒙正, 陈炜, 杨伟东, 等. 撞击式喷嘴凝胶推进剂雾化及表征[J]. 推进技术, 2009, 30(1): 46-50. (ZHANG Meng-zheng, CHEN Wei, YANG Wei-dong, et al. Atomization and Characteristics of Gelled Propellant with Impinging Injector[J]. Journal of Propulsion Technology, 2009, 30(1): 46-50.)
[18] Chojnacki K T. Atomization and Mixing of Impinging Non-Newtonian Jets[D]. Huntsville: University of Alabama-Huntsville, 1997.
[19] Hasson D, Peck R. Thickness Distribution in a Sheet Formed by Impinging Jets[J]. Aiche Journal, 1964, 10(5): 752-754.
[20] Choo Y J, Kang B S. Parametric Study on Impinging-Jet Liquid Sheet Thickness Distribution Using an Interferometric Method[J]. Experiments in Fluids, 2001, 31:56-62.　　　　　　　　*　收稿日期:2017-02-22；修订日期:2017-05-27。基金项目:国家自然科学基金(51276192)。作者简介:石超,男,博士生,研究领域为喷雾燃烧与SPH数值仿真。E-mail: chao163shi@163.com(编辑:张荣莉)