DONG Yu-xuan, LI Zhi-gang, LI Jun. Effects of Airfoil and Radial Tilt Design of Struts on Aerodynamic Performance of Gas Turbine Exhaust Diffuser[J]. Journal of Propulsion Technology, 2021, 42(6): 1245-1255.
[1] 周亚峰, 谢业平, 李泳凡. 航改燃气轮机总体性能与排气装置的一体化设计[J]. 航空发动机, 2008, 34(1): 7-9.
[2] Sovran G, Klomp E D. Experimentally Determined Optimum Geometries for Rectilinear Diffusers with Rectangular, Conical or Annular Cross-Section, Fluid Dynamics of Internal Flow[M]. New York: Elsevier Publishing Co, 1967: 270-319.
[3] Sultanian B K, Nagao S, Sakamoto T. Experimental and Three-Dimensional CFD Investigation on a Gas Turbine Exhaust System[J]. ASME Journal of Engineering for Gas Turbines and Power, 1999, 121(4): 364-374.
[4] Feldcamp G K, Birk A M. A Study of Modest CFD Models for the Design of an Annular Diffuser with Struts for Swirling Flow[R]. ASME GT 2008-50605.
[5] Vassiliev V, Irmisch S, Clarideg M, et al. Experimental and Numerical Investigation of the Impact of Swirl on the Performance of Industrial Gas Turbines Exhaust Diffusers[R]. ASME GT 2003-38424.
[6] Vassiliev V, Irmisch S, Abdel-wahab S, et al. Impact of the Inflow Conditions on the Heavy-Duty Gas Turbine Exhaust Diffuser Performance[J]. Journal of Turbomachinery, 2012, 134(4).
[7] Schaefer P, Gie ? P A, Finzel C, et al. Some Aspects on Inlet Blockage Affecting the Performance of a Heavy Duty Gas Turbine’s Exhaust Diffuser[R]. ASME GT 2014-25599.
[8] 何 鹏, 董金钟. 不同进口边界层条件下S形扩压器流场特性研究[J]. 推进技术, 2017,38(4): 751-758.
[9] Guillot S, Ng W F, Hamd H D, et al. The Experimental Studies of Improving the Aerodynamic Performance of a Turbine Exhaust System[J]. ASME Journal of Engineering for Gas Turbines and Power, 2015, 137(1).
[10] Schaefer P, Hofmann W H, Gie ? P A. Multi-Objective Optimization for Duct and Strut Design of an Annular Exhaust Diffuser[R]. ASME GT 2012-69211.
[11] 黄恩德, 楚武利, 董 玮. 非轴对称涡轮排气扩压器优化设计[J]. 推进技术, 2016, 37(10): 1839-1846.
[12] 黄恩德, 楚武利, 董 玮. 一种涡轮排气扩压器的优化设计[J]. 航空动力学报, 2017, 32(2): 455-462.
[13] 黄熙君, 董金钟. 大扩张角扩压器的附面层吹除技术的研究[J]. 推进技术, 1989, 10(3): 25-29.
[14] Prakash R, Sudhakar P, Mahalakshmi N V. An Experimental Analysis of Flow Through Annular Diffuser with and Without Struts[C]. Aachen: ASME 2006 Internal Combustion Engine Division Spring Technical Conference, 2006: 87-92.
[15] Vassiliev V, Irmisch S, lorjancic S F . CFD Analysis of Industrial Gas Turbine Exhaust Diffusers[R]. ASME GT 2002-30597.
[16] Xue S, Guillot S, Ng W F, et al. An Experimental Investigation of the Performance Impact of Swirl on a Turbine Exhaust Diffuser/Collector for a Series of Diffuser Strut Geometries[J]. ASME Journal of Engineering for Gas Turbines and Power, 2016, 138(9).