Please wait a minute...

Current Issue

Structure, Strength and Reliablity

Research on Reliability and Influencing Factors of Solid Rocket Motor Grain Under Vertical Storage

2020, 41 (8): 0-   

System

Analysis for Influence of Variable Geometry Parameters on Transition State Performance of Variable Cycle Engine

JIA Lin-yuan1, CHEN Yu-chun1, TAN Tian1, LI Mei-jin2, GU Bin2

2020, 41 (8): 1681-1691   DOI:10.13675/j.cnki.tjjs.190523

Large Eddy Simulation of Flow Around a D-Shaped Bluff Body for Drag Reduction Based on Passive Control

WU Wen-chang, HAN Xing-si, MAO Jun-kui

2020, 41 (8): 1692-1700   DOI:10.13675/j.cnki.tjjs.190405

Aero-thermodynamics

Effects of Blade Tip Suction on Cascade Gap Leakage Flow

ZHANG Bo-tao, LIU Bo, ZHAO Hang

2020, 41 (8): 1701-1709   DOI:10.13675/j.cnki.tjjs.190585

Experimental Investigation of Surface Roughness on Flow Around Forward-Skewed Compressor Blade

TANG Kai, LIU Zhi-gang, WANG Hui, DAI Qiu-lin, ZHAO Jian-tong, QING Ke-you, LIU Jian-peng

2020, 41 (8): 1710-1719   DOI:10.13675/j.cnki.tjjs.190486

Effects of Exducer Blade Offset on Performance of High Pressure Ratio Tandem Centrifugal Compressor

KANG Da1, HE Wei-dong2, XU Yi3

2020, 41 (8): 1720-1729   DOI:10.13675/j.cnki.tjjs.190593

Flow Mode and Mechanism of Turbine Blade Tip

XUE Wei-peng1, ZHANG Hua-jun2, TANG Guo-qing1, ZENG Jun1

2020, 41 (8): 1730-1739   DOI:10.13675/j.cnki.tjjs.190528

Compressor Airfoil Optimization Based on Camber Curvature Control

KONG Qing-guo1, DU Xu-bo2, QIANG Xiao-qing3, ZHANG Hong1

2020, 41 (8): 1740-1747   DOI:10.13675/j.cnki.tjjs.190344

Effects of Hybrid Wing Body Swirl on Single-Stage Axial Flow Compressor Performance Using Numerical Simulation

WANG Jia-le, CHENG Bang-qin, FENG Lu-ning, LI Jun, YAO Yao-ze, MA Cai-dong

2020, 41 (8): 1748-1755   DOI:10.13675/j.cnki.tjjs.200030

Combustion, Heat and Mass Transfer

Effects of Venturi Divergence Angle on Characteristics of Swirl Cup

WU Shi-zhi, WANG Zhi-kai, SHI Xiao-xiang, JIANG Li-jun, CAO Jun

2020, 41 (8): 1756-1764   DOI:10.13675/j.cnki.tjjs.190791

Experimental Study on Effects of Injection Angles on Film Cooling Performance of Sister Holes

LI Run-dong, LI Ming-chun, HE Ye-guang, YANG Tian-hua, LIU Xue-bin

2020, 41 (8): 1765-1772   DOI:10.13675/j.cnki.tjjs.190448

Development of Real-Fluid Model Libraries and Homogeneous Solver Based on OpenFOAM

LI Peng-fei1, LEI Fan-pei2, ZHOU Li-xin1

2020, 41 (8): 1773-1784   DOI:10.13675/j.cnki.tjjs.190186

Modeling of Source Cooling Model and Applications in a Plate and a Turbine

YAO Lin, WANG Hao, ZHONG Dong-dong, GE Ning

2020, 41 (8): 1785-1796   DOI:10.13675/j.cnki.tjjs.190261

Temperature of Particles with Different Diameters along Turbine Flow Path and Impingement Characteristics on Turbine Vanes and Blades

ZENG Fei1,2,3, SONG Yu-qin4

2020, 41 (8): 1797-1806   DOI:10.13675/j.cnki.tjjs.190821

Combustion Efficiency of Paraffin-Based Fuels in Hybrid Rocket Motor

WANG Yin1, HU Song-qi1, LIU Lin-lin1, LIU Xue-li1, LI Lian-qiang2

2020, 41 (8): 1807-1813   DOI:10.13675/j.cnki.tjjs.190296

Effects of Inlet Velocity Profile on Lean Ignition and Lean Blowout Limits of a Bluff Body Flame-Holder

HUANG Ya-kun, HE Xiao-min, ZHU Huan-yu, XUE Chong, GUO Yu-xi

2020, 41 (8): 1814-1822   DOI:10.13675/j.cnki.tjjs.190487

Structure, Strength and Reliablity

Performance of Piezoelectric Damper on Bladed Disk Based on Topology Optimization

LI Lin1,2, TIAN Kai-yuan1, FAN Yu1,2, MA Hao-ye1

2020, 41 (8): 1831-1840   DOI:10.13675/j.cnki.tjjs.190208

Rolling Bearing Fault Diagnosis Based on Smoothness Priors Approach and Permutation Entropy

DAI Hong-de1, CHEN Qiang-qiang2,3, DAI Shao-wu2, ZHU Min2

2020, 41 (8): 1841-1849   DOI:10.13675/j.cnki.tjjs.190135

Theortical and Experimental Study on Leakage Characteristics of Brush Seal Based on ALE Fluid-Structure Compled Methodology

LI Guo-qin1, SUN Dan1, LIU Yong-quan2, ZHAN Peng2, XIN Qi2

2020, 41 (8): 1850-1860   DOI:10.13675/j.cnki.tjjs.190354

Test, Experiment and Control

Temperature Delay Uncertainty μ Synthesis for Flight Environment Simulation System of Altitude Ground Test Facilities

ZHU Mei-yin1,2, WANG Xi1,2, PEI Xi-tong3, ZHANG Song3, DAN Zhi-hong3, LIU Jia-shuai1,2, MIAO Ke-qiang1,2, JIANG Zhen1,2

2020, 41 (8): 1861-1870   DOI:10.13675/j.cnki.tjjs.190553

Forecasting of Fuel Pump Performance Trend Based on Decomposition-Granulation and Optimized Extreme Learning Machine

CHEN Qiang-qiang1,2, DAI Shao-wu1, DAI Hong-de3, LI Juan4

2020, 41 (8): 1871-1879   DOI:10.13675/j.cnki.tjjs.190305

Investigation on Water Hammer in Pipes by Slightly Compressible Fluid Model and Compressible Fluid Model

REN Xiao-wen1, CHEN Hong-yu1, LI Ping2, LI Peng-fei1, ZHANG Bo-tao1

2020, 41 (8): 1880-1886   DOI:10.13675/j.cnki.tjjs.190415

Adaptively Optimized Support Vector Machine Online Prediction of Aeroengine Performance Parameters Based on Sliding Time Window Strategy

CAO Hui-ling, WANG Ran

2020, 41 (8): 1887-1894   DOI:10.13675/j.cnki.tjjs.190539

Material,Propellant and Fuel

Direct Numerical Simulation of Breakup Characteristics of Power Law Fluid Impingement Jet

ZHENG Hao-ming, SUN Jun-ning, ZHU Cheng-xiang, YOU Yan-cheng

2020, 41 (8): 1895-1902   DOI:10.13675/j.cnki.tjjs.190537

Ship Propulsion

Combinatorial Comprehensive Assessment of Gas Turbine Health Condition

FANG You-long1,2, HE Xing2, LIU Dong-feng1,2, YU Liang-wu2

2020, 41 (8): 1903-1913   DOI:10.13675/j.cnki.tjjs.190336

Electric Propulsion and Other Advanced Propulsion

Experimental Study on Beam Current Regulation of Diverse Propellant Types for RF Ion Thruster

LI Jian-peng, LI Xing-da, ZHANG Xing-min, ZHAO Yi-de, LI Juan, GUO De-zhou, HU-Jing

2020, 41 (8): 1914-1920   DOI:10.13675/j.cnki.tjjs.190461