Please wait a minute...

Current Issue

System

Design of a Porous Cambered-Hole Grain for Solid Rocket Motor

YUE Song-chen1, WANG Qiang1, HE Xun-zhou2

2020, 41 (6): 1201-1209   DOI:10.13675/j.cnki.tjjs.190450

Design and Test of Oxygen/Kerosene Combustion Heating Device in High-Temperature Wind Tunnel

JIANG Yi-tong1, TIAN Ning1, XIAO Hong2, ZHANG Li-song1, ZOU Yang-hui1, LI Xiao-ping2, HAN Meng-yang1

2020, 41 (6): 1210-1216   DOI:10.13675/j.cnki.tjjs.190458

Cycle Analysis and Design Feasible Region Research of DeeplyPrecooled Combined Cycle Engine in Airbreathing Mode

GAO Yuan1, CHEN Yu-chun1, WANG Zhi-hua1, LI Hao-min1, CAI Fei-chao1

2020, 41 (6): 1217-1226   DOI:10.13675/j.cnki.tjjs.190502

Aero-thermodynamics

Numerical Simulation Study of Effects of Precooling on Flow Characteristics of Engine Inlets

XUE Liang-bo1, SUN Bo1, ZHUO Chang-fei1, MAN Yan-jin2, LI Hong-dong2

2020, 41 (6): 1227-1236   DOI:10.13675/j.cnki.tjjs.190368

Effects of Circumferential Coverage Ratio and Axial Positionof Injector on Axial Compressor Stability Enhancementwith Self-Recirculating Casing Treatment

WANG Guang1, CHU Wu-li1,2, CHI Zhi-dong1, CHEN Xiang-yi1, ZHANG Hao-guang1

2020, 41 (6): 1237-1249   DOI:10.13675/j.cnki.tjjs.190489

Numerical Study for Effects of Sweeping Jets on Tip Clearance Flow in a Turbine Cascade

MENG Qing-he1, LI Wei-hang1, CHEN Shao-wen1, WANG Song-tao1

2020, 41 (6): 1250-1257   DOI:10.13675/j.cnki.tjjs.190266

An Improved Analytical Prediction Model for Tonal Noise of Single-Stage Fan

TONG Hang1, QIAO Wei-yang1, DING Song1, LI Lin1, WANG Liang-feng1

2020, 41 (6): 1258-1267   DOI:10.13675/j.cnki.tjjs.190291

Conjugate Heat Transfer Analysis for Cooled Low Pressure Turbine Rotor Blade

ZENG Jun1, ZHANG Wei-tao1, WANG Peng-fei1, LEI Ming2, ZHENG Zhen-jiang2

2020, 41 (6): 1268-1275   DOI:10.13675/j.cnki.tjjs.190395

Research on Effects of Inlet Flow Rate on Flow Resistance Characteristics of Tubeless Vortex Reducer

XIA Zi-long1, WANG Suo-fang1

2020, 41 (6): 1276-1285   DOI:10.13675/j.cnki.tjjs.190634

Effects of Non-Axisymmetric Profiled End Wall Treatments on Performance of a Centrifugal Compressor

LANG Jin-hua1, CHU Wu-li1,2, ZHANG Hao-guang1, AN Guang-yao1, MA Shan1

2020, 41 (6): 1286-1295   DOI:10.13675/j.cnki.tjjs.190441

Combustion, Heat and Mass Transfer

Effects of Addition of Carbon Black and Swirl Flowon Combustion Performance of PolyethyleneFueled Solid Fuel Ramjet

LI Wei-xuan1, YANG Hai-tao1,2, CHEN Xiong1, XUE Su-lin1

2020, 41 (6): 1296-1304   DOI:10.13675/j.cnki.tjjs.190340

Experimental Investigation on Pilot Spray Characteristic of Internally-Staged Combustor

FU Jiang-kun1, ZHOU Jian-hua1, GUO Zhi-hui2

2020, 41 (6): 1305-1313   DOI:10.13675/j.cnki.tjjs.190372

Numerical Study of Effects of Centrifugal Force on Ice Accretion on a Rotor Blade

CHEN Ning-li1,2, DU Jian-min1, JI Hong-hu2, HU Ya-ping2, YUAN Yong-qing3

2020, 41 (6): 1314-1323   DOI:10.13675/j.cnki.tjjs.190292

Numerical Study of Effects of Water Temperature on Cavitating Flow

XIANG Le1, TAN Yong-hua1,2, CHEN Hui1, XU Kai-fu3

2020, 41 (6): 1324-1333   DOI:10.13675/j.cnki.tjjs.190572

Study on Flow Field Characteristics of Low Swirl Concentric Staged Combustor

CHANG Feng1, LIN Hong-jun1, CHENG Ming1, LI Mei-ye1

2020, 41 (6): 1334-1339   DOI:10.13675/j.cnki.tjjs.190430

Numerical Studies on Fuel Deposition Characteristics in an Afterburner Air-Cooled Fuel Injector

ZHOU Xiong1, KANG Yu-dong1, KANG Song1, DENG Yuan-hao1, ZHONG Shi-lin1, LIU Guo-zhu2

2020, 41 (6): 1340-1350   DOI:10.13675/j.cnki.tjjs.190577

Three-Dimensional Numerical Simulation of H2/Air Continuous Rotating Detonation Flow Field Based on OpenFOAM

MENG Hao-long1, WENG Chun-sheng1, WU Yu-wen1, ZHENG Quan1, WEI Wan-li1

2020, 41 (6): 1351-1360   DOI:10.13675/j.cnki.tjjs.190370

Experimental Study on Film Cooling and Heat Transfer Characteristics of a Fully-Cooled Turbine Vane at High Turbulence Intensity Condition

YAO Chun-yi1, ZHU Hui-ren1,2, LIU Cun-liang1,2, ZHANG Bo-lun1, ZHOU Dao-en1

2020, 41 (6): 1361-1370   DOI:10.13675/j.cnki.tjjs.190484

Structure, Strength and Reliablity

Fault Identification of Rotor Partly Filled with Liquid on Aero-Engine

WANG Yan-kai1, SHAO Zeng-de1, LIAO Ming-fu1, WANG Xin1

2020, 41 (6): 1371-1378   DOI:10.13675/j.cnki.tjjs.190187

A Global Elastic Structure Method and Its Application onFluid-Structure Coupling Analysis of Blade

YU Ming-da1, XU Zi-li2, LIU Zhen-gu1, FENG Zhi-peng1, ZHANG Yi-xiong1, CHEN Jian-guo1

2020, 41 (6): 1379-1386   DOI:10.13675/j.cnki.tjjs.190130

Numerical Investigation for Effects of under-Race LubricationStructure on Oil Capture Efficiency of Radial Oil Scoop

JIANG Le1, LIU Zhen-xia1, LYU Ya-guo1

2020, 41 (6): 1387-1395   DOI:10.13675/j.cnki.tjjs.190108

Test, Experiment and Control

Optimal Design and Experimental Study of Capacitance Imaging Sensor

MA Min1, FAN Guang-yong1, WANG Li1

2020, 41 (6): 1396-1403   DOI:10.13675/j.cnki.tjjs.190503

Control Law Design for N-dot Closed Control Loop for Acceleration and Deceleration Process in Turbofan Engine

YAO Tai-ke1, WEN Wei1, YANG Gang1, WANG Ya-ni1, ZHU Ai-feng1

2020, 41 (6): 1404-1410   DOI:10.13675/j.cnki.tjjs.190273

Gas Path Fault Diagnosis Based on Second-Order Robust Sliding Mode Observer for Civil Turbofan Engine

QIANG Zi-jian1, LU Feng1, CHANG Xiao-dong1, HUANG Jin-quan1

2020, 41 (6): 1411-1419   DOI:10.13675/j.cnki.tjjs.190210

Material,Propellant and Fuel

Research on Rocket Kerosene Pyrolysis

ZHANG Xing1, SUN Hai-yun1, JIANG Rong-pei1, LI Meng-zhu1, FANG Tao1

2020, 41 (6): 1420-1427   DOI:10.13675/j.cnki.tjjs.190464

Electric Propulsion and Other Advanced Propulsion

Research on Rotating Spoke Instability in Anode Layer Hall Thrusters

ZHAO Jie1,2, TANG De-li1, LI Ping-chuan1, XU Li1,2, ZHANG Fan1

2020, 41 (6): 1428-1433   DOI:10.13675/j.cnki.tjjs.190499

Effects of Different Wall Erosion on Low Frequency Oscillation Characteristics of Hall Thruster

HAN Ke1, WANG Ying1, LU Hai-feng2

2020, 41 (6): 1434-1440   DOI:10.13675/j.cnki.tjjs.190408