Please wait a minute...

Current Issue

System

Thrust Difference Analysis of Engine Altitude Test under Choking Condition

MA Qian-rong, ZHOU Jie, QIU Qian, LI Kang

2021, 42 (3): 481-487   DOI:10.13675/j.cnki.tjjs.190665

Performance Degradation of Aeroengines Based on Stochastic Wiener Process

ZHAO Hong-li, ZHANG Meng

2021, 42 (3): 488-494   DOI:10.13675/j.cnki.tjjs.190632

Multi-Points and Multi-Objective Optimization Design of Subsonic UAV S-Shaped Inlet

ZENG Li-fang1, HU Jian-xin2, PAN Ding-yi1, LI Jun1, SHAO Xue-ming1

2021, 42 (3): 495-504   DOI:10.13675/j.cnki.tjjs.200104

Aero-thermodynamics

Experiment and Simulation of Simplified Model of Front Variable Area Bypass Injector of Variable Cycle Engine

HUANG Guang-hui1, HUANG Guo-ping1, XIA Chen1, XIAO Shuang-qiang2

2021, 42 (3): 505-512   DOI:10.13675/j.cnki.tjjs.190829

Performance Study on Flexible-Extendible Nozzle Based on Bidirectional Fluid-Solid Coupling Method

CHEN Lei, JIA Hui-ming, WANG Ge, LI De-jian, GUAN Ben

2021, 42 (3): 513-521   DOI:10.13675/j.cnki.tjjs.190582

Experimental Investigations on Effects of Partial Nozzle Closure on Air Supply Parameters in Pre-Swirl Air Supply System

LEI Zhao1, LIU Gao-wen1, WANG Jun-song1, GU Wei2, HUO Yu2, ZHENG Long-xi1

2021, 42 (3): 522-531   DOI:10.13675/j.cnki.tjjs.190714

Effects of Plasma Synthetic Jet on Bump-Induced Flow Field under Supersonic Condition

GAO Wan-ning, ZHANG Yue, TAN Hui-jun, CHEN Liang, WANG Chao

2021, 42 (3): 532-539   DOI:10.13675/j.cnki.tjjs.190689

Investigation on Endwall Loss Mechanism of a Highly Loaded Helium Turbine with Low Aspect Ratio

SUI Xiu-ming1, DONG Tian-tian1,2, ZHOU Qing-hui1,2, ZHAO Wei1,2, ZHAO Qing-jun1,2,3

2021, 42 (3): 540-549   DOI:10.13675/j.cnki.tjjs.190772

Linear Stability of Underwater Supersonic Gas Jet

HUANG Nan, CHEN Zhi-hua, WANG Zheng-lun

2021, 42 (3): 550-559   DOI:10.13675/j.cnki.tjjs.190747

Integrated Analysis Approach of Injection Precooling and Compressor Wet Compression Characteristics of Jet-Engine under High Speed Inflow Condition

AN Li-ping1,2, WANG Hao1, ZHU Zi-huan1, WANG Yan-gang1

2021, 42 (3): 560-568   DOI:10.13675/j.cnki.tjjs.190667

Combustion, Heat and Mass Transfer

Effects of Flight Height on Flow and Radiation Characteristics of Solid Rocket Two-Phase Plume

BAO Xing-dong1,2,3, YU Xi-long1,2, WANG Zhen-hua3, MAO Hong-xia3, XIAO Zhi-he3

2021, 42 (3): 569-577   DOI:10.13675/j.cnki.tjjs.190580

Matching of Fuel and Air in Pilot Stage of Single-Cavity Trapped Vortex Combustor

GUO Yu-xi, HE Xiao-min, ZHU Yi-xiao, ZHANG Kai

2021, 42 (3): 578-586   DOI:10.13675/j.cnki.tjjs.190735

Experimental Investigation of Transpiration Cooling Using Modified Propylene Glycol Aqueous Solution

RAN Fang-yuan, WU Nan, HE Fei, WANG Jian-hua

2021, 42 (3): 587-592   DOI:10.13675/j.cnki.tjjs.190650

Experimental Research on Spinning Detonation Structure

YAN Yi-ran1,2, ZHANG Ying-hua1,2, ZHAO Huan-juan1,2, QIN Xuan-ye1,2, NIU Shu-zhen1,2, DONG Shi-ming1,2

2021, 42 (3): 593-600   DOI:10.13675/j.cnki.tjjs.190839

Effects of Area Ratio of Film Hole to Impingement Hole and Momentum Flux Ratio on Overall Cooling Effectiveness of Afterburner Double Wall Heat Shield

NIU Jia-jia1,2, LIU Cun-liang1,2, LIU Hai-yong1,2, XIAO Xiang3, LIN Jian-fu3

2021, 42 (3): 601-611   DOI:10.13675/j.cnki.tjjs.200179

Indirect Ignition Process of Slinger Combustor

WANG Yu-ming, WANG Yi-yang, XIAO Wei, PENG Zhong-jiu

2021, 42 (3): 612-619   DOI:10.13675/j.cnki.tjjs.190777

Effects of Leading Edge Injection on the Film Cooling Characteristics of Multirow Cooling Holes on the Turbine Vane Suction Side

YAO Chun-yi1, ZHU Hui-ren1,2, LI Xin-lei1, LIU Cun-liang1,2, GUO Wen3, LIU Song3, LI Shi-feng3

2021, 42 (3): 620-629   DOI:10.13675/j.cnki.tjjs.190672

Catalytic Combustion and Gaseous Products Characteristics of n-Decane on Pt/ZSM-5

ZHANG Xing, YANG Wei-juan, ZHU Xiao-yu, YAO Yan-yi, ZHOU Jun-hu

2021, 42 (3): 630-637   DOI:10.13675/j.cnki.tjjs.190611

Influence Factors of Combustion Performance of Solid Rocket Scramjet Engine

ZHU Shao-hua, LIANG Lei, QIN Fei, WEI Xiang-geng, YE Jin-ying

2021, 42 (3): 638-646   DOI:10.13675/j.cnki.tjjs.200124

Structure, Strength and Reliablity

Tribological and Dynamic Coupling Analysis of Piston-Crosshead in Stirling Engine

YANG Xin1, SUN Si-cong2, LI Sai-li1,3, GONG Huan1, LI Song-jian1,3

2021, 42 (3): 647-656   DOI:10.13675/j.cnki.tjjs.200402

Crack Propagation Comparison of Disks with Natural or Preset Inclusion

WU Ying-long1,2, XUAN Hai-jun2, GUO Xiao-jun3, SHAN Xiao-ming3, LIU Jian-xin3

2021, 42 (3): 657-665   DOI:10.13675/j.cnki.tjjs.190753

Test, Experiment and Control

Multi-Objective Optimization Design and Simulation for Fuel Centrifugal Pump

LI Jia1, LI Hua-cong2, WANG Wan-cheng3, WANG Yue3

2021, 42 (3): 666-674   DOI:10.13675/j.cnki.tjjs.200247

Long Short-Term Memory Network Based Method and Its Application in Time-Series Data Trend Prediction

YANG Ke, FAN Shi-dong

2021, 42 (3): 675-682   DOI:10.13675/j.cnki.tjjs.200394

Effects of Variable Rotor Speed Flight Control on Output Response of Turboshaft Engine

YAN Qiu-ying1, DU Zi-yan2, ZHOU Xiu-qing1, HUANG Kai-ming1

2021, 42 (3): 683-691   DOI:10.13675/j.cnki.tjjs.200105

Material,Propellant and Fuel

Pyrolysis and Coking Deposition of Aviation Kerosene under Supercritical Conditions in S-Bend Tubes

ZHAO Jin-jie, LEI Zhi-liang, BAO Ze-wei, ZHU Quan, LI Xiang-yuan

2021, 42 (3): 692-700   DOI:10.13675/j.cnki.tjjs.190556

Tow-Phase Flow in Bending Pipe of a Powder Fuel Conveying System Based on Discrete Element Method

CHEN Hao-tian1, ZHUO Chang-fei1, JIANG Xian-song2, CAI Yu-jiao2, MA Yan-yan2

2021, 42 (3): 701-710   DOI:10.13675/j.cnki.tjjs.190620

Electric Propulsion and Other Advanced Propulsion

Working Points and Thermal Control of 30cm Diameter Ion Thruster in Orbit

SUN Ming-ming, ZHENG Yi, YANG Jun-tai, SHI Kai

2021, 42 (3): 711-720   DOI:10.13675/j.cnki.tjjs.190811